broke your iPhone 8 screen in a drop
test last week well today I'm going to
show you how to fix it for this repair
you're going to need a pee tube
pentalobe screwdriver a Philips triple
zero driver an eye opener one ice black
some I fix at opening picks tweezers and
a spudger opening your iPhone may
decrease its water resistance so be sure
to keep your iPhones safe from water
exposure in the future first things
first
make sure your phone is powered off and
then go ahead and remove the two
pentalobe screws from the bottom we'll
need to soften the adhesive on the phone
using our eye opener and then grab your
ice black to help separate the display
now you can slide a pic into the seam to
the phone and cut away the adhesive
along all sides the top of the display
is held in place by Clips so you need to
pull the display down a little to
disengage them then slowly open the
iPhone to the right towards the power
button just like a book but backwards
but be careful the display is still
connected by delicate cables grab your
Phillips triple-zero driver and remove
the four screws on the bracket that
covers the battery display and
home-button cables move upstairs and
remove the three screws and brackets
securing the front camera and sensor
cable and disconnect the cable now you
can fully remove the display that's all
for this repair be sure to click that
subscribe button so you have the newest
repair videos in your back pocket for
your next fix I'll see you next time
[Music]