hey everyone I'm Kelsey with iFixit and
today I'm gonna show you how to replace
the display on your samsung galaxy s 9
plus for this repair you're going to
need an eye opener a suction handle I
fix it opening picks a spudger a
phillips double zero screwdriver
isopropyl alcohol a heat gun and
tweezers
we also recommend using a magnetic mat
for this repair it'll keep your screws
organized and safe from rolling away our
repair procedure uses a replacement
display without a frame meeting you get
to change out the display without having
to remove everything else in your phone
so this is not the procedure you should
use if you're trying to replace both the
display and the frame start by making
sure that your phone is off and use your
eye opener to heat up the back panel to
soften the adhesive and repeat if
necessary if the adhesive continued to
give you a hard time try using the heat
gun or a hairdryer lay your suction cup
on the phone as close to the heated edge
as possible then use your pick to cut
away the adhesive all around the edges
once you have a portion of the panel
separated insert a pic to keep the
adhesive from resealing work your pick
around the phone cutting all the
adhesive but be careful don't slide the
pic in too far or else you might damage
the fingerprint sensor once you have all
the adhesive cut lift the panel and
disconnect the fingerprint sensor on the
mid frame you have 11 Phillips double-0
screws that hold the NFC antenna and the
wireless charging coil
[Music]
once you've removed these screws and
components go ahead and disconnect the
battery then go ahead and disconnect the
display cable as well the display is
held by copious amounts of adhesives so
we need our eye opener to soften it
place your suction cup on the heated
edge and when you have a gap use your
pick to slowly move around the edge of
the display use a couple drops of
isopropyl alcohol to help soften the
adhesive careful going around the right
side where the display cable is hiding
you don't want to cut it if you ever
feel that the adhesive is still too hard
try using a heat gun as well with all
the adhesive free you can remove the
display from the mid frame that's all
for this repair be sure to hit subscribe
so you have our next repair videos in
your back pocket for your next fix I'll
see you next time
[Music]