D-Link Support Publishing       \WFW311\README.TXT              July 1996

        D-Link PCI Family Ethernet Card Installation
                   for Windows for Workgroup 3.11

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     A PCI compatible computer
     Microsoft's Windows for Workgroup 3.11
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable with this
      skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

**********************************************************
*  README for Windows for Workgroups V3.11 Installation  *
**********************************************************

Installation Procedure:

     When LAN drivers is installed, Windows for Workgroups will present a list
      of all available drivers.  Since there will be no DLKPCI drivers initially,
      select UNLIST for 3rd party adapters not in the driver list.

     Windows for Workgroups will ask for the drive/path containing the DLKPCI
      Type the following (assume the driver is located at C:\WFW311)

            C:\WFW311             

     Windows for Workgroups will attempt to locate an OEMSETUP.INF file in the
      specified path. If you have entered the path name correctly, Windows
      for Workgroups should copy the appropriate drivers to the Windows for
      Workgroups system.

     At this point, the driver would have been properly copied and the
      installation would proceed to the next step.  Please refer to your
      Windows for Workgroups installation guide for correct procedures.

     After the initial installation, the DLKPCI drivers will be permanently
      copied to the Windows for Workgroups system.
      Subsequent network driver lists will already contain DLKPCI drivers.