D-Link Support Publishing       \PKTDRV\PCTCP.TXT               July 1996

        D-Link PCI Family Ethernet Adapter Packet Driver
                   Installation for FTP PC/TCP

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     A PCI compatible computer
     FTP's PC-TCP Network Operating System
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable with this
      skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    Two methods can be used:

    METHOD 1:
    ÄÄÄÄÄÄÄÄ
     If the DLKPCI.SYS program is used, the following statement must be
      included in your CONFIG.SYS file:

            DEVICE = DLKPCI.SYS [/option] <packet_int_no>

      <packet_int_no> is the software interrupt vector number used
                      by the packet driver program. This can be from
                      96 to 128.

      /d              Delay Initial - The driver program will not initialize
                      the network interface card until the packet driver
                      program is accessed by its upper layer program.

      /w              The /w parameter is used only in the Windows
                      environment.

      See \PKTDRV\README.TXT for additional parameters


    METHOD 2:
    ÄÄÄÄÄÄÄÄÄ
     If the DLKPCI.COM program is used, follow these steps:

     Execute DLKPCI.COM by typing:

            >DLKPCI [/option] <packet_int_no>

      <packet_int_no> is the software interrupt vector number used by the
                      packet driver program. This can be from 96 to 128.

      /d              Delay Initial - The driver program will not initialize
                      the network interface card until the packet driver
                      program is accessed by its upper layer program.

      /w              The /w parameter is for use only in the Windows
                      environment.

      See \PKTDRV\README.TXT for additional parameters

     Execute the ETHDRV.EXE and IDRIVE.EXE device driver programs.
      These programs are provided by FTP.

     FTP's PC/TCP and associated programs are ready to use.