D-Link Support Publishing       \NETWARE\OS2ODI.TXT             July 1996

        D-Link PCI Family Ethernet Adapter Installation
                   for the NetWare OS/2 ODI Driver

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     A PCI compatible computer
     An ODI compatible network operating system
     A PCI Family Series Adapter
     A knowledge of basic OS/2 commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic OS/2 commands
     A knowledge of editing text files
     A knowledge of OS/2 basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable with this
      skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

     Install the Requester on the workstation.  
      For information on the installation procedure, please refer to 
      Novell's "NetWare Requester for OS/2" manual.

     Copy DLKPCI.SYS into your C:\NETWARE directory.

     Modify your CONFIG.SYS file to include the following device driver
      statement:

         DEVICE=C:\NETWARE\DLKPCI.SYS

     Modify your NET.CFG file for special settings you need.  For information 
      on the various keywords, please refer to Novell's manual or the sample 
      NET.CFG file file included in the provided diskette.