D-Link Support Publishing       \NETWARE\NW312.TXT              July 1996

          D-Link PCI Family PCI Ethernet Adapter Installation
                   for the NetWare Server 3.12 Driver

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     A PCI compatible computer
     An ODI compatible network operating system
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable with this
      skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office
     Because this version of driver follows Novell ODI Driver Specification
      Version 3.3, the old server must be patched to work well with this 
      driver. The patch method is described as below:
                
        1. Copy LOADER.EXE and LSWAP.EXE to the NetWare 3.12 server directory,
           must be \NWSERVER (if not, rename the directory name).

        2. Execute LSWAP.EXE at \NWSERVER.

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

     Copy the DLKPCI.LAN file from the <PATH>\DLKPCI.lan directory into the
      subdirectory of your server. Type:

        >copy <PATH>\DLKPCI.lan  \NW312

        ; if NW312 is the server subdirectory
        ; <PATH> is the path where DLKPCI.lan resides. If the autoinstall
          was used <PATH>=\SRV312.

     Copy all provided NLM files into your server directory. Type:

        >copy <PATH>\*.NLM  \NW312

     Run SERVER.EXE on the server.

     Edit the AUTOEXEC.NCF file as follows:

        :load install
         Select <System Option>
         Select <Edit Autoexec.NCF file>

     Modify the server's AUTOEXEC.NCF as follows:

        load C:\NW312\NBI31X.NLM
        load C:\NW312\MSM.NLM
        load C:\NW312\ETHERTSM.NLM
        load C:\NW312\DLKPCI.LAN
        bind ipx to DLKPCI net=xxxx  ;xxxx is the network # ie. 33

     Press Esc after editing.

     Select "Yes" to save.

     Select "Exit" to exit installation.

     Shut down the server and then turn it ON again.

     The driver is now installed and running.