D-Link Support Publishing       \NDIS\PATHWORK.TXT              July 1996

        D-Link PCI Family Ethernet Adapter Installation
                   for DECnet PATHWORK v4.0

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     A PCI compatible computer
     DECnet PATHWORK v4.0
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable with this
      skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    DECnet PathWork provides a NETSET.EXE program for installing NDIS 
    drivers. For information on the usage of this program, please refer 
    to the DECnet installation manual.

     Install DECnet PathWork selecting 3Com's Etherlink II card.

     Modify your CONFIG.SYS file to include the following lines:

        device = c:\decnet\ELNKII.SYS

        to

        device = c:\decnet\DLKPCI.DOS


     Modify the following lines in your PROTOCOL.INI file:

        [ELNKMACII]
        drivername = ELNKII$
        ioaddress = 0x300
        interrupt = 3
        xmitbufs = 2

        [IPX4MAC]
           :
        bindings = ELNKMACII
           :

        [DATALINK]
           :
        bindings = ELNKMACII
           :

        to

        [DLKPCI]
        drivername = DLKPCI$

        [IPX4MAC]
           :
        bindings = DLKPCI
           :

        [DATALINK]
           :
        bindings = DLKPCI
           :