D-Link Support Publishing       \NDIS\3OPEN.TXT                 July 1996

        D-Link PCI Family Ethernet Adapter Installation
                   for 3Com 3+ Open Share

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     A PCI compatible computer
     3COM 3+ Open Share
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable with this
      skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

     Install 3Com 3+ Open with support for 3Com's 3C501 adapter cards.

     Copy the DLKPCI.DOS file into the C:\3OPEN\DOSWKSTA\LANMAN\DRIVERS 
      directory.

     Modify the corresponding device driver statement for the 3C501 card in 
      your CONFIG.SYS as follows:

        device = c:\3open\doswksta\lanman\drivers\DLKPCI.DOS

     Modify the PROTOCOL.INI file as follows:

        [ETHERLINK]
            :
        drivername = DLKPCI$
            :

     Reboot your system let the new configuration take effect.