D-Link Support Publishing Feb. 1996 D-Link DE-650CT PCMCIA Ethernet Card Installation for SCO UNIX LLI Driver Contents 컴컴컴컴 Introduction Requirements Minimum Skill Level Compatibility List Getting Started Driver Directory Structure Revision History Support Options Copyrights, Trademarks, and Disclaimers Introduction 컴컴컴컴컴컴 Getting Started will describe the installation instructions. Requirements 컴컴컴컴컴컴 A PCMCIA compatible Laptop A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and VLSI) or Databook compatible. SCO Unix 3.2.4.x A DE-650CT (our single media cards are not supported, 650T and 650C) A knowledge of basic Unix commands and editing text files Minimum Skill Level 컴컴컴컴컴컴컴컴컴� A knowledge of basic Unix commands A knowledge of editing text files A knowledge of Unix basic file structure A knowledge of the network driver configuration being used Please see Support Options if you are not comfortable will this skill level Compatibility List 컴컴컴컴컴컴컴컴컴 DE-650CT only (will not run with DE-650T or DE-650C) Removal of any present PCMCIA drivers For a laptop compatibility list please consult your local D-Link Branch Office Getting Started 컴컴컴컴컴컴컴� This installation procedure applies to SCO UNIX LLI drivers with TCP/IP v.1.2x. NOTE: Commands in UNIX are case-sensitive, thus, those in upper-case will be treated differently from those in lower-case. Login to the network as root. (On maintenance mode) Insert the driver diskette in Drive A or Drive B and use the doscp command to copy the SCOUNIX Driver into the UNIX directory. Type: # cd / # doscp a:/scounix/setup65s /setup65s (or # doscp b:/scounix/setup65s /setup65s) # chmod +x /setup65s # ./setup65s a: (or # ./setup65s b:) Add a chain by executing the following command: #netconfig A menu similar to the following appears on the screen: 1) Add a chain 2) Remove a chain 3) Reconfigure an element in a chain q) Quit Select option 1 "Add a chain". The following prompt appears on the screen: Select top level of chain to Add or q to quit: Type sco_tcp for SCO TCP/IP for UNIX. The following message appears: Select next level of chain to Add or q to quit: Select d65e0. This value varies according to the card number. The following prompt appears: Add chain sco_tcp->d65e0 (y/n): Type "y" for yes. This message appears: Installing the de65e driver into the link kit .Enter IRQ (3,4,5,9,10,11,15) [5] or 'q' to quit: Type value .Enter I/O base address (300..360) [300] or 'q' to quit: Type value .Enter RAM base address (c0000..ec000) [d0000] or 'q' to quit: Type value .Enter PCMCIA Slot Number (0,1) [0] or 'q' to quit: Type value Answer the question accordingly. This message then appears: Enter the internet address of this interface: Specify the internet address of the interface. The following message appears: Enter the netmask for this interface: Specify the subnet mask for the interface. Default mask is 255.255.255.0. The following message appears on the screen: Does the interface use a broadcast address of all 1's (y/n): Answer this question accordingly. Default is "y". The following then appears: Enter the broadcast address for this interface: Type in the broadcast address for the interface. The program asks: Are these values correct ? (y/n) If you think all values specified are correct, type "y". Otherwise, answer "n" and repeat the process. The following message appears on the screen: XX Pseudo ttys are currently configured, do you want to: 1) Add Pseudo ttys 2) Remove Pseudo ttys Select an option or enter q to quit [q] Type "q". The main menu reappears on the screen: 1) Add a chain 2) Remove a chain 3) Reconfigure a element in a chain q) Quit Select option: Select "q". The following message appears on the screen: Do you want to relink to kernel now ? Type "y" for yes. The following appears: Do you want this kernel to boot by default (y/n) Type "y" for yes. The following message appears on the screen: Do you want the kernel environment rebuilt (y/n) Type "y" for yes. Reboot UNIX by typing the following: # shutdown -y -g0 Multi-Card Installation 컴컴컴컴컴컴컴컴컴컴컴� It is possible to install up to two DE-650CT adapters in your workstation. This allows gateway function (that is; routing function). Further Information 컴컴컴컴컴컴컴컴컴� You can retrieve statistical information via the #netstat -i command. Executing this command displays a screen similar to the following: Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Collis d65e0 1500 192.9.200 unix2 423 0 423 0 0 lo0 2048 170.23 localhost 180 0 180 0 0 Driver Directory Structure 컴컴컴컴컴컴컴컴컴컴컴컴컴 DE650CT Diskette Release 02/01/96 픓COUNIX 홇NFO Config file 홇NIT Config file 홏ASTER Config file 홐ODE Config file 홗ECONF Config file 홗EMOVE Config file 홙YSTEM Config file 홙PACE C Config file 홗EADME TXT Text file 홁RIVER O V1.0 SCO 3.2.4x driver 픓ETUP65S Config file Revision History 컴컴컴컴컴컴컴컴 Revision: No. 960201 1. Update all DOS drivers. All DOS version drivers can auto-detect the I/O and IRQ. Drivers named DE65S. 2. New added Diagnostics program 3. Updated AutoInstall program from v1.0 to v2.0 Support Options 컴컴컴컴컴컴컴� For technical support, you may contact your authorized D-Link distributor, dealer, or the following D-Link headquarters: In U.S.A. Tel: +1(714)455-1688 Fax: +1(714)455-2521 BBS: +1(714)455-1779 BBS: +1(714)455-9616 In Canada Tel: +1(905)828-0260 Fax: +1(905)828-5669 BBS: +1(905)828-6673 In U.K. & Europe Tel: +44(181)235-5555 Fax: +44(181)235-5500 BBS: +44(181)235-5511 In Germany Tel: +49(6196)643011 Fax: +49(6196)28049 BBS: +49(6196)28378 In Asia, Taiwan Tel: +886(2)916-1600 Fax: +886(2)914-6299 BBS: +886(2)910-1835 In France Tel: +33(1)30238688 Fax: +33(1)3028689 In Australia Tel: +61(2)4177100 Fax: +61(2)4171077 BBS: +61(2)4173711 In Nordic Tel: +46(40)163330 Fax: +46(40)163340 BBS: +46(40)163343 In Singapore Tel: +657746233 Fax: +657746322 BBS: +657744787 In China Tel: +86(10)4934175 Fax: +86(10)4991648 In Tokyo Tel: +81(3)57512351 Fax: +81(3)57512352 In India Tel: +91(22)6172478 Fax: +91(22)6172476 The BBS communication setup information is as follows : Speed : 2400-14400 baud - Germany 2400-9600 baud - Asia,Taiwan 14400-16800 baud - Canada 9600-14400 baud V32, V32bis, V42, V42bis - U.S.A. 2400-19200 baud V24, V32, V32bis, V42bis - U.K. & Europe Parity : none Data bits : 8 Stop bit : 1 Copyrights, Trademarks, and Disclaimers 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� A documents and DE-650 drivers are Copywritten to Copyright (c) 1996 by D-Link Corporation. All rights reserved. All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are rights reserved by Microsoft Corporation All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights reserved by Novell Corporation Further rights reserved to their respective corporations