D-Link Support Publishing            PCTCP.TXT                    Feb. 1996

              D-Link DE-650CT PCMCIA  Ethernet Card Packet Driver
                           Installation for FTP PC/TCP

 Contents
 ÄÄÄÄÄÄÄÄ
        Introduction
        Requirements
        Minimum Skill Level
        Compatibility List
        Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
        This installation assumes that the PCMCIA drivers are working properly.
        Please consult INST_DOS.TXT for help with PCMCIA Drivers.
        Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
        A PCMCIA compatible Laptop
        A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
         VLSI) or Databook compatible.
        FTP's PC TCP/IP 2.x or higher
        A DE-650CT (our single media cards are not supported, 650T and 650C)
        A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        A knowledge of basic DOS commands
        A knowledge of editing text files
        A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
        A knowledge of the network driver configuration being used
        Please see Support Options if you are not comfortable will this
         skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        DE-650CT only (will not run with DE-650T or DE-650C)
        Removal of any present PCMCIA drivers
        For a laptop compatibility list please consult your local
         D-Link Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        Two methods can be used:

        METHOD 1:
        ÄÄÄÄÄÄÄÄ
        If the DE65SPD.SYS program is used, the following statement must be
                included in your CONFIG.SYS file:

            DEVICE = DE65SPD.SYS [/option] <packet_int_no>

                <packet_int_no> is the software interrupt vector number used by
                                the packet driver program.  This can be from 96
                                to 128.

                /d              Delay Initial - The driver program will not
                                initialize the network interface card until the
                                packet driver program is accessed by its upper
                                layer program.

                /w              The -w parameter is for use only in the Windows
                                environment.

                See INST_DOS.TXT for addition parameters

                You can place this line anywhere in the CONFIG.SYS file.

        METHOD 2:
        ÄÄÄÄÄÄÄÄÄ
        If the DE65SPD.COM program is used, follow these steps:

        Execute DE65SPD.COM by typing:

        >DE65SPD [/option] <packet_int_no>

                <packet_int_no> is the software interrupt vector number used
                                by the packet driver program.  This can be from
                                96 to 128.

                /d              Delay Initial - The driver program will not
                                initialize the network interface card until the
                                packet driver program is accessed by its upper
                                layer program.

                /w              The -w parameter is for use only in the Windows
                                environment.

                See INST_DOS.TXT for addition parameters

        Execute the ETHDRV.EXE and IDRIVE.EXE device driver programs.
         These programs are provided by FTP.

        FTP's PC/TCP and associated programs are ready to used