D-Link Support Publishing        NW312.TXT                       Feb. 1996

                   D-Link DE-650CT PCMCIA Ethernet Card Installation
                        for NetWare Server 3.12 Driver

 Contents
 ÄÄÄÄÄÄÄÄ
        Introduction
        Requirements
        Minimum Skill Level
        Compatibility List
        Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
        This installation assumes that the PCMCIA drivers are working properly.
        Please consult INST_DOS.TXT for help with PCMCIA Drivers.
        Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
        A PCMCIA compatible Laptop
        A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
         VLSI)
        Netware 3.12 Server Software
        A DE-650CT (our single media cards are not supported, 650T and 650C)
        A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        A knowledge of basic DOS commands
        A knowledge of editing text files
        A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
        A knowledge of the network driver configuration being used
        Please see Support Options if you are not comfortable will this
         skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        DE-650CT only (will not run with DE-650T or DE-650C)
        Removal of any present PCMCIA drivers
        For a laptop compatibility list please consult your local
         D-Link Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        Copy the NWDE65S.LAN file from the <PATH>\nwde65s.lan directory
         into the subdirectory of your server.  Type:

         >copy <PATH>\nwde65s.lan  \NW312
          ; if nw311 is the server subdirectory
          ; <PATH> is the path where nwde65s.lan resides. If the autoinstall
          was used <PATH>=\NW312.

        Copy all provided NLM files into your server directory.  Type:

         >copy <PATH>\*.NLM  \NW312

        Run SERVER.EXE on the server.

        Edit the AUTOEXEC.NCF file as follows:

         :load install
          Select <System Option>
          Select <Edit Autoexec.NCF file>

        Modify the server's AUTOEXEC.NCF as follows:

                load C:\NW312\MSM.NLM
                load C:\NW312\ETHERTSM.NLM
                load C:\NW312\NWDE65S.LAN
                bind ipx to nwde65s net=xxxx  ;xxxx is the network # ie. 33

        Press Esc after editing.
        Select "Yes" to save.
        Select "Exit" to exit installation.
        Shut down the server and then turn it ON again.
        The driver is now installed and running.