D-Link Support Publishing PCNFS.TXT Feb. 1996 D-Link DE-650CT PCMCIA Ethernet Card Installation for SUN PC-NFS V5.0 Contents 컴컴컴컴 Introduction Requirements Minimum Skill Level Compatibility List Getting Started Introduction 컴컴컴컴컴컴 This installation assumes that the PCMCIA drivers are working properly. Please consult INST_DOS.TXT for help with PCMCIA Drivers. Getting Started will describe the installation for PCNFS. Requirements 컴컴컴컴컴컴 A PCMCIA compatible Laptop A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and VLSI) or Databook compatible. SUN PC-NFS V5.0 A DE-650CT (our single media cards are not supported, 650T and 650C) A knowledge of basic DOS commands and editing text files Minimum Skill Level 컴컴컴컴컴컴컴컴컴� A knowledge of basic DOS commands A knowledge of editing text files A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT) A knowledge of the network driver configuration being used Please see Support Options if you are not comfortable will this skill level Compatibility List 컴컴컴컴컴컴컴컴컴 DE-650CT only (will not run with DE-650T or DE-650C) Removal of any present PCMCIA drivers For a laptop compatibility list please consult your local D-Link Branch Office Getting Started 컴컴컴컴컴컴컴� Please read all methods below and choose the one that matches your configuration. Method 1 -- NDIS Driver 컴컴컴컴컴컴컴컴컴컴컴� When using PC-NFS concurrently with LAN Manager, select the "NDIS" option from the PC-NFS installation screen. This option works with the NDIS driver included in the provided driver diskette. Copy the files listed below into the \NFS directory of your hard disk. These files will be used in the installation. File Description ------------ ---------------------------------------------- NFS-NDIS.SYS PC-NFS driver program DE65S.DOS NDIS driver program PROTMAN.SYS MS PROTOCOL MANAGER NETBIND.EXE MS LAN MANAGER Netbind The following lists the contents of the configuration files: CONFIG.SYS AUTOEXEC.BAT 컴컴컴컴컴 컴컴컴컴컴컴 SWITCHES=/F SET TZ=EST5EDT DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS; BUFFERS=10,0 C:\LANMAN\NETBIND FILES=40 SET TEMP=C:\DOS STACKS=0,0 SET NFSDRIVE=C LASTDRIVE=G SET NFSPATH=C:\NFS SHELL=C:\DOS\COMMAND.COM C:\DOS /P SET TN_DIR=C:\NFS\TELNET DEVICE=C:\NFS\PCNFS.SYS /l40 C:\NFS\PRT * DEVICE=C:\NFS\SOCKDRV.SYS C:\NFS\NET INIT DEVICE=C:\LANMAN\PROTMAN.SYS /I:C:\LANMAN DEVICE=C:\LANMAN\NFS-NDIS.SYS DEVICE=C:\LANMAN\DE65S.DOS PROTOCOL.INI 컴컴컴컴컴컴 [PROTOCOL MANAGER] DriverName = PROTMAN$ [DE65S] DRIVERNAME = DE65S$ [NFS-NDIS] DriverName = NFSLINK$ Bindings = DE65S To use the NDIS driver, the user needs to obtain a PC-NFS 5.0 QUIKNDIS diskette which will install all but the DE-650CT driver. Method 2 -- Packet Driver 컴컴컴컴컴컴컴컴컴컴컴컴� When using PC-NFS independently, select the "OTHER" option from the PC-NFSinstallation screen. This option works with the PACKET driver included in the provided driver diskette. Copy the files listed below into the \NFS directory of your hard disk. These files will be used in the installation. File Description ------------ ------------------------------------- PDNFS.SYS PC-NFS driver program DE65S.SYS Packet driver program The following lists the contents of the configuration files: CONFIG.SYS AUTOEXEC.BAT 컴컴컴컴컴 컴컴컴컴컴컴 SWITCHES=/F SET TZ=EST5EDT DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS; BUFFERS=10,0 SET TEMP=C:\DOS FILES=40 SET NFSDRIVE=C STACKS=0,0 SET NFSPATH=C:\NFS LASTDRIVE=G SET TN_DIR=C:\NFS\TELNET SHELL=C:\DOS\COMMAND.COM C:\DOS /P C:\NFS\PRT * DEVICE=C:\NFS\PCNFS.SYS /l40 C:\NFS\NET INIT DEVICE=C:\NFS\SOCKDRV.SYS DEVICE=C:\NFS\DE65S.SYS DEVICE=C:\NFS\PDNFS.SYS Method 3 -- ODI Driver 컴컴컴컴컴컴컴컴컴컴컴 When using PC-NFS concurrently with NetWare 3.1x/4.0, select the "ODI" option from the PC-NFS installation screen. This option works with the ODI driver included in the provided driver diskette. Copy the files listed below into the \NFS directory of your hard disk. These files will be used in the installation. File Description ------------ ----------------------------------------- NFSODI.SYS PC-NFS driver program DE65SODI.COM ODI driver program LSL.COM NetWare Link Support Layer IPXODI.COM NetWare IPX/SPX Protocol NETX.EXE NetWare Workstation Shell The following lists the contents of the configuration files: CONFIG.SYS AUTOEXEC.BAT 컴컴컴컴컴 컴컴컴컴컴컴 SWITCHES=/F SET TZ=EST5EDT DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS; BUFFERS=10,0 SET TEMP=C:\DOS FILES=40 SET NFSDRIVE=C STACKS=0,0 SET NFSPATH=C:\NFS LASTDRIVE=G SET TN_DIR=C:\NFS\TELNET SHELL=C:\DOS\COMMAND.COM C:\DOS /P LSL DEVICE=C:\NFS\PCNFS.SYS /l40 DE65S DEVICE=C:\NFS\SOCKDRV.SYS C:\NFS\PRT * DEVICE=C:\NFS\NFSODI.SYS /b2 C:\NFS\NET INIT IPXODI NETX NET.CFG 컴컴컴� Link driver DE65SODI Frame Ethernet_802.3 Frame Ethernet_II Protocol IPX 0 Ethernet_802.3 If your Novell FILE SERVER is configured to use the Ethernet_802.3 frame type, add a /b2 switch to the line DEVICE=C:\NFS\NFSODI.SYS in your CONFIG.SYS file and add an entry in your NET.CFG file defining the two frames types.