D-Link Support Publishing Feb. 1996 D-Link DE-650CT PCMCIA Ethernet Card Installation for Lantastic Contents 컴컴컴컴 Introduction Requirements Minimum Skill Level Compatibility List Getting Started Driver Directory Structure Revision History Support Options Copyrights, Trademarks, and Disclaimers Introduction 컴컴컴컴컴컴 This installation assumes that the PCMCIA layer is working properly. See Getting Started for installation instructions. Requirements 컴컴컴컴컴컴 A PCMCIA compatible Laptop A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and VLSI) or Databook compatible. 3-COM Open 3+Share Network Operating System A DE-650CT (our single media cards are not supported, 650T and 650C) A knowledge of basic DOS commands and editing text files Minimum Skill Level 컴컴컴컴컴컴컴컴컴� A knowledge of basic DOS commands A knowledge of editing text files A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT) A knowledge of the network driver configuration being used Please see Support Options if you are not comfortable will this skill level Compatibility List 컴컴컴컴컴컴컴컴컴 DE-650CT only (will not run with DE-650T or DE-650C) Removal of any present PCMCIA drivers For a laptop compatibility list please consult your local D-Link Branch Office Getting Started 컴컴컴컴컴컴컴� Lantastic 5.0 Install 컴컴컴컴컴컴컴컴컴컴� Using NDIS driver 컴컴컴컴컴컴컴컴� For NDIS driver, D-Link support "DE65S.DOS" driver for DE-650 Family Adapter. User can use "DE65S.DOS" driver to replace AEXNDIS.DOS which is the NDIS driver offered by ARTISOFT. *** CONFIG.SYS **** DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI ------------------------------------------------------------- DEVICE=C:\LANTASTI\AEXNDIS.DOS -------> By Lantastic * please replace to * DEVICE=C:\LANTASTI\DE65S.DOS -------> By D-Link ------------------------------------------------------------- *** STARTNET.BAT *** ------------------------------------------------------------- C:\LANTASTI\AI-NDIS BIND_TO=AEXNDIS_NIF * please replace to * C:\LANTASTI\AI-NDIS BIND_TO=DE65S_NIF ------------------------------------------------------------- C:\LANTASTI\AILANBIO C:\LANTASTI\REDIR MachineName *** PROTOCOL.INI *** ------------------------------------------------------------- [AEXNDIS_NIF] DRIVERNAME = AEXNDIS$ * please replace to * [DE65S_NIF] DRIVERNAME = DE65S$ -------------------------------------------------------------- Comments: If you are using PROTMAN.DOS V1.x, you must use the NO_BIND option on the AI-NDIS command line in the STARTNET.BAT, and you must run NETBIND.EXE V1.x before AILANBIO.EXE. Lantastic 6.0 Install 컴컴컴컴컴컴컴컴컴컴� Using NDIS driver 컴컴컴컴컴컴컴컴� After installing the DE-650 driver for Lantastic to destination directory "C:\LANTASTI.DRV" by D-Link AUTOinstall program,user can use Lantastic 6.0 install program, and select "NDIS support for network adapters" then type path "C:\LANTASTI.DRV". Install program will search "DE65S.DOS" and "PROTOCOL.INI" and copy these two files to target directory. If user already install Lantastic 6.0 and want to install D-Link's DE-65S Family adapter, just replace AEXNDIS.DOS with D-Link's NDIS driver "DE65S.DOS" at CONFIG.SYS NOTE: "DE65S.DOS" is an NDIS driver supported by D-Link "AEXNDIS.DOS" is an NDIS driver supported by ARTISOFT *** CONFIG.SYS *** DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI ---------------------------------------------------------- DEVICE=C:\LANTASTI\AEXNDIS.DOS -------> By Lantastic * please replace to * DEVICE=C:\LANTASTI\DE65S.DOS -------> By D-Link ---------------------------------------------------------- *** STARTNET.BAT *** @echo ===== Begin Lantastic configuration ===== SET LAN_CFG=C:\LANTASTI PATH C:\LANTASTI;%PATH% SET LAN_DIR=C:\LANTASTI.NET rem Please obtain the NETBEUI.EXE program from Microsoft NETBEUI ---------------------------------------------------------- AI-NDIS BIND_TO=AEXNDIS_NIF * please replace to * AI-NDIS BIND_TO=DE65S_NIF ---------------------------------------------------------- AILANBIO @STARTNET.CFG REDIR LANTA @STARTNET.CFG SERVER C:\LANTASTI.NET @STARTNET.CFG NET LOGIN \\LANTA @echo ===== End LANtastic configuration ===== *** Protocol.ini *** [NETBEUI_XIF] DriverName = netbeui$ Sessions = 6 NCBS = 12 ------------------------------------------------------- Bindings = AEXNDIS_NIF * please replace to * Bindings = DE65S_NIF ------------------------------------------------------- LANABASE = 1 ------------------------------------------------------- [AEXNDIS_NIF] DRIVERNAME = AEXNDIS$ * please replace to * [DE65S_NIF] DRIVERNAME = DE65S$ ------------------------------------------------------- Using ODI DOS driver 컴컴컴컴컴컴컴컴컴컴 ODI for DOS driver, D-Link support "DE65SODI.COM" driver for DE-650 Family Adapter. User can use "DE65SODI.COM" driver to replace NRODI.COM which is the ODI for DOS driver offered by ARTISOFT. Note: Because DE65SODI.COM following HSM v4.0 spec, please save LSL.COM, IPXODI.COM that original supported by Lantastic. Copy both release driver diskette's LSL.COM, IPXODI.COM to C:\LANTASTI. *** STARTNET.BAT *** @echo ===== Begin Lantastic configuration ===== SET LAN_CFG=C:\LANTASTI PATH C:\LANTASTI;%PATH% SET LAN_DIR=C:\LANTASTI.NET SET NWDBPATH=C:\Lantasti\NW LSL --> Please use release driver diskette NRODI --> please replace with DE65SODI ODINSUP IPXODI --> Please use release driver diskette ------------------------------------------------------ AI-NDIS BIND_TO=NRODI * please replace to * AI-NDIS BIND_TO=DE65S ------------------------------------------------------ AILANBIO @STARTNET.CFG REDIR LANTA @STARTNET.CFG SERVER C:\LANTASTI.NET @STARTNET.CFG NET LOGIN \\LANTA @echo ===== End LANtastic configuration ===== *** NET.CFG *** Please add string below into the NET.CFG file. Link Driver DE65S Frame Ethernet_802.3 Driver Directory Structure 컴컴컴컴컴컴컴컴컴컴컴컴컴 DE650CT Diskette Release 02/01/96 픋ANTASTI 홁E65S DOS V3.00 NDIS 2.0 driver 홓ROTOCOL INI Config file 홗EADME TXT Text file 홇NST_DOS TXT Text file 홇PXODI COM Nvl. support file 홎SL COM Nvl. support file 픁E65SODI COM V3.00 ODI DOS driver Revision History 컴컴컴컴컴컴컴컴 Revision: No. 950601 1. Update the following drivers: \IBMPC\NT31 \IBMPC\LANSMART \IBMPC\NETWARE\CLIENT\IPXDE65N.COM \IBMPC\NDIS\DOS\NDIS.DOS \IBMPC\WFW311 \IBMPC\NDIS\OS2\PCIC16.OS2 Revision: No. 960201 1. Update all DOS drivers. All DOS version drivers can auto-detect the I/O and IRQ. Drivers named DE65S. 2. New added Diagnostics program 3. Updated AutoInstall program from v1.0 to v2.0 Support Options 컴컴컴컴컴컴컴� For technical support, you may contact your authorized D-Link distributor, dealer, or the following D-Link headquarters: In U.S.A. Tel: +1(714)455-1688 Fax: +1(714)455-2521 BBS: +1(714)455-1779 BBS: +1(714)455-9616 In Canada Tel: +1(905)828-0260 Fax: +1(905)828-5669 BBS: +1(905)828-6673 In U.K. & Europe Tel: +44(181)235-5555 Fax: +44(181)235-5500 BBS: +44(181)235-5511 In Germany Tel: +49(6196)643011 Fax: +49(6196)28049 BBS: +49(6196)28378 In Asia, Taiwan Tel: +886(2)916-1600 Fax: +886(2)914-6299 BBS: +886(2)910-1835 In France Tel: +33(1)30238688 Fax: +33(1)3028689 In Australia Tel: +61(2)4177100 Fax: +61(2)4171077 BBS: +61(2)4173711 In Nordic Tel: +46(40)163330 Fax: +46(40)163340 BBS: +46(40)163343 In Singapore Tel: +657746233 Fax: +657746322 BBS: +657744787 In China Tel: +86(10)4934175 Fax: +86(10)4991648 In Tokyo Tel: +81(3)57512351 Fax: +81(3)57512352 In India Tel: +91(22)6172478 Fax: +91(22)6172476 The BBS communication setup information is as follows : Speed : 2400-14400 baud - Germany 2400-9600 baud - Asia,Taiwan 14400-16800 baud - Canada 9600-14400 baud V32, V32bis, V42, V42bis - U.S.A. 2400-19200 baud V24, V32, V32bis, V42bis - U.K. & Europe Parity : none Data bits : 8 Stop bit : 1 Copyrights, Trademarks, and Disclaimers 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� A documents and DE-650 drivers are Copywritten to Copyright (c) 1996 by D-Link Corporation. All rights reserved. All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are rights reserved by Microsoft Corporation All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights reserved by Novell Corporation Further rights reserved to their respective corporations