Jan. 1996

                       DE-620 Ethernet Card
               Windows for Workgroups V3.11 Driver Installation
               ================================================

**********************************************************
*  README for Windows for Workgroups V3.11 Installation  *
**********************************************************

The drivers for Windows for Workgroups 3.11 are as follows:

\WFW311\de620.386       ; NDIS 3.0 WFW driver for Windows for Workgroups
\WFW311\de620.DOS       ; NDIS 2.0 DOS driver for Windows for Workgroups
\WFW311\de620odi.COM    ; NetWare 3.X ODI driver for Windows for Workgroups
\WFW311\NET.CFG         ; NET.CFG file for Windows for Workgroups
\WFW311\OEMSETUP.INF    ; OEMSETUP file for Windows for Workgroups
\DISK1

Installation Procedure:

1. When a LAN driver is installed, Windows for Workgroups will present a list
   of all available drivers.  Since there will be no DE-620 drivers (de620.386,
   de620.DOS and de620odi.COM driver programs ) initially, select UNLIST for
   third-party adapters not included in the list.

2. Windows for Workgroups will ask for the path where the adapter drivers
   reside.
   Insert the driver diskette in Drive A and type:

             A:\WFW311

3. Windows for Workgroups will check whether or not the OEMSETUP.INF file
   exists in the specified path. If the file exists, Windows for Workgroups
   will then copy the appropriate drivers into the Windows for Workgroups
   system.

The driver is now properly copied.  Installation will then proceed to the next
steps. For information on these steps, please refer to your Windows for
Workgroups manual.

After installation, the drivers will be part of the Windows for Workgroups
system.  Subsequent accesses to the driver lists will include the DE620
drivers.