Jan. 1996
                         DE-620 Ethernet Card
                    Packet Driver Installation for PC-NFS
                    =====================================

*****************************************************
* Packet Driver Program for Sun MicroSystems PC-NFS *
*****************************************************

The PC-NFS Driver Program allows you to run Sun MicroSystems PC-NFS on a
workstation with an Ethernet adapter.

The following lists the files that will be used in the installation:

Files                Description
------------         ----------------------------------------------------------
PDNFS.SYS            PC-NFS driver program
DE620PD.SYS          Packet driver program
DE620PD.COM          Packet driver program

There are two methods of installing the driver.  They are described below.

METHOD 1:

1.  Install the PC-NFS program according to the procedure described in the
    PC-NFS manual.  From the installation screen, select "3C501"
    (the 3Com EtherLink adapter) as your network adapter.  When prompted for
     the adapter configuration, select IRQ3 and I/O base address of 300H.

2. Copy the following files into the \NFS directory of your hard disk:

          PDNFS.SYS
          DE620PD.SYS
          DE620PD.COM

3. Modify your CONFIG.SYS file as follows:

   DEVICE=C:\ANSI.SYS
   DEVICE=C:\NFS\PCNFS.SYS /m
   DEVICE=C:\NFS\SOCKDRV.SYS
   DEVICE=C:\NFS\VECIE6.SYS
   DEVICE=C:\NFS\DE620PD.SYS  <packet_int_no> 
   DEVICE=C:\NFS\NFSVEC.SYS
   DEVICE=C:\NFS\PDNFS.SYS
   LASTDRIVE=V

4. Modify your AUTOEXEC.BAT file as follows:

   SET PATH = C:\;C:\NFS
   SET TZ=EST5EDT
   SET NFSDRIVE=C
   NET YPDOMAIN ypserver
   NET START RDR
   NET YPSET homer
   NET NAME john
   NET USER F: \\user\john

   The name "john" here is only an example.

5. Reboot your system to start PC-NFS.

You may now execute PC-NFS commands to communicate with other stations on the
network through the TCP/IP protocol.

METHOD 2:

1. Install the PC-NFS program according to the procedure described in the
   PC-NFS manual.  From the installation screen, select "3C501"
   (the 3Com EtherLink adapter) as your network adapter. When prompted for the
   adapter configuration, select IRQ3 and I/O base address of 300H.

2. Copy the following files into the \NFS directory of your hard disk:

         PDNFS.SYS
         DE620PD.SYS
         DE620PD.COM

3. Modify your CONFIG.SYS file as follows:

        DEVICE=C:\ANSI.SYS
        DEVICE=C:\NFS\PCNFS.SYS /m
        DEVICE=C:\NFS\SOCKDRV.SYS
        DEVICE=C:\NFS\VECIE6.SYS
        DEVICE=C:\NFS\NFSVEC.SYS
        DEVICE=C:\NFS\PDNFS.SYS
        LASTDRIVE=V

4.  Modify your AUTOEXEC.BAT file as follows:

        SET PATH = C:\; C:\NFS
        SET TZ=EST5EDT
        SET NFSDRIVE=C
        DE620PD  <packet_int_no>
        NET YPDOMAIN ypserver
        NET START RDR
        NET YPSET homer
        NET NAME john
        NET USER F: \\user\john

       The name "john" here is only an example.

5. Reboot your system to start PC-NFS.

You may now execute PC-NFS commands to communicate with other stations on the
network through the TCP/IP protocol.