EdgeSwitch X v1.4.0
==========================

* Added support for showing port STP state in UISP.
* Improved compatibility with UISP v1.4.0 and newer.
* Default device name is based on device's MAC address.
* Fixed race condition in configuration restore state.
* Fixed possible out-of-bounds read in crafted LLDP packets.

EdgeSwitch X v1.3.1
===================

* Fixed upgrade of ES-18X v1.2.x to firmware v1.3.x.
* Fixed potential vulnerability via crafted LLDP packets.

EdgeSwitch X v1.3.0
===================

* Added SNMP configuration to web UI.
* Trunk mode is no longer enabled on all ports in default configuration.
* Discovery scanner configuration options have been removed, scan is now performed only when neighbors are requested.
* Improved detection of client information (IP address and hostname) in MAC table.
* Changed color scheme of the web UI.
* Fixed SNMP stopping to reply and utilizing 100 % CPU.
* Some marginal MIBs removed to increase SNMP stability and responsiveness.
* Fixed device sometimes not replying to discovery requests.
* Fixed incorrect speed reported in SNMP when port is down.
* Other minor fixes improving UNMS compatibility and stability.
* Fixed incorrect device name reported in SNMP.
* Fixed high CPU utilization with plugged SFP modules.
* Fixed possible deadlock when processing HTTP requests.

EdgeSwitch X v1.2.3
===================

* Increased resistance of web UI to XSS and clickjacking attacks.
* Set correct MTU when disabling jumbo frames.

EdgeSwitch X v1.2.2
===================

* Added device analytics ID and example output to tech-support file.
* Fixed error when changing VLAN configuration of LAG interfaces.
* Fixed overflow of received bytes in web UI.

EdgeSwitch X v1.2.1
===================

* Fixed losing of untagged status on non-trunk ports excluded from VLAN 1.
* Fixed HTTPS certificate/SSH key always regenerated after backup restore.

EdgeSwitch X v1.2.0
===================

* Added option for trunking undefined VLANs.
* Added tooltip for quick UNMS connection and diagnostics.
* Added possibility to perform factory reset using the button when device is running.
* Added statistics and stability reporting with opt-in prompt.
* Added support for ES-18X.
* Improved support for configuration of the device using UNMS Mobile.
* Full names of discovered devices are shown in the Discovery tool.
* Added warning when enabling PoE on active ports.
* Details from LLDP and Discovery are shown in port detail tooltip.
* Improved ping tool granularity.
* STP auto edge is now the default option on switch ports.
* Changed default parameters of STP for faster convergence.
* Changed default LAG mode to LACP.
* Improved stability of UNMS connection.
* Minimum password length increased to 8 characters in UI.
* Fixed restored configuration being partially applied after uploading, now it is applied completely after reboot.
* Fixed memory leak when device was connected to UNMS for long periods.
* Fixed various minor issues in the web interface.
* Fixed PoE state not cleared when runtime factory reset is performed.
* Fixed PoE losing state after reboot on ES-18X (on devices with pre-release firmware only).
* Fixed overflow in transmitted bytes port statistics.

EdgeSwitch X v1.1.4
===================

* Fixed command injection in `copy tech-support`.

EdgeSwitch X v1.1.3
===================

* Fixed another command injection in `copy running-config`.
* Fixed Ubiquiti Discovery over IPv6.

EdgeSwitch X v1.1.2
===================

* Fix occasional packet loss issues.
* Fix PoE staying enabled after factory reset without power cycle.
* Fix missing values in Ubiquiti Discovery responses.

EdgeSwitch X v1.1.1
===================

* Disabled SSH port forwarding to default system user accounts (HackerOne report #512958).
* Disabled execution of shell commands provided by SSH client (HackerOne report #511025).
* Fixed command injection in 'copy running-config' CLI command (HackerOne report #508256).

EdgeSwitch X v1.1.0
===================

* Added port rx/tx rate limiting.
* Added factory reset via UI.
* Added cable test.
* Added jumbo frames toggle (10 kB).
* Added configurable ping watchdog timeout.
* Added support for 10/100 Mbps speed with UF-RJ45-1G SFP module.
* Discovery tool improvements (vendor names, discovery results in MAC list).
* Discovery responds to IPv6 probes.
* Fixed discovery responder responding on non-management VLANs.
* Fixed SSH login (ACL verified by standard OpenSSH's password authentication method).
* Fixed minor issues in system LED indication.
* Fixed firmware upgrade from UNMS.
* Fixed backup and restore from UNMS.
* Fixed broken SSH after config restore.