Filename: BMC_X10AST2400-C001MS_20260529_04.07_STD&STDsp.bin version: 4.07 Date: 05-29-2026 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.15 Java iKVM Viwer version : v1.69 r41 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: iKVM / Console Redirection (Port 5900) SSL Certificate Expired on Multiple Nodes stunnel: renew keys/certs & update KVM/SOL JARs Impact motherboard: All Affected functions: N/A Validation: 1. Please verify Remote Control's Console Redirect function -------------------------------------------------------------------------------------------------------- Filename: BMC_X10AST2400-C001MS_20260422_04.06_STD&STDsp.bin version: 4.06 Date: 04-22-2026 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.14 Java iKVM Viwer version : v1.69 r40 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [204646] BMC iLPCAHB Bridge OPEN leads to BMC memory read/write on C001MS Impact motherboard: All Affected functions: N/A Validation: 1. Please contact Glen's team to verify this security issue. -------------------------------------------------------------------------------------------------------- Filename: BMC_X10AST2400-C001MS_20260408_04.05_STD&STDsp.bin version: 4.05 Date: 04-08-2026 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.14 Java iKVM Viwer version : v1.69 r40 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [204646] BMC iLPCAHB Bridge OPEN leads to BMC memory read/write on C001MS Impact motherboard: All Affected functions: N/A Validation: 1. Please contact Glen's team to verify this security issue. 2. Category: Fix Description: Upgrade Dropbear from v2019.76 to v2025.88. Impact motherboard: All Affected functions: SSH, SMASH Validation: 1. Check the version of Dropbear. 2. Check SSH and SMASH function. -------------------------------------------------------------------------------------------------------- Filename: BMC_X10AST2400-C001MS_20250604_04.04_STD&STDsp.bin version: 4.04 Date: 06-04-2025 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.14 Java iKVM Viwer version : v1.69 r40 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: Remove sha1 algorithms for SSH (port 22). Impact motherboard: All MBs. Affected functions: network Validation: 1. Send nmap command to check port 22 2. Check if remove sha1 algorithms for SSH (port 22). 2. Category: Fix Description: Remove weak cipher suite and set cipher preference to server. Impact motherboard: All MBs. Affected functions: network Validation: 1. Send nmap command to check port 443, 623, and 5900. 2. Check if weak cipher is removed. -------------------------------------------------------------------------------------------------------- Filename: BMC_X10AST2400-C001MS_20250425_04.03_STD&STDsp.bin version: 4.03 Date: 04-25-2025 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.14 Java iKVM Viwer version : v1.69 r40 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: Remove weak cipher suite and set cipher preference to server. Impact motherboard: All MBs. Affected functions: network Validation: 1. Send nmap command to check port 443, 623, and 5900. 2. Check if weak cipher is removed. -------------------------------------------------------------------------------------------------------- Filename: BMC_X10AST2400-C001MS_20240627_04.02_STD&STDsp.bin version: 4.02 Date: 06-27-2024 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.14 Java iKVM Viwer version : v1.69 r40 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: Fixed E200-9A LDAP Implementation Issue Impact motherboard: A2SDi-4C-HLN4F Affected functions: Validation: 1. login Web, and enable check box "Enable Active Directory Authentication." 2. Use Redfish API to patch https://10.148.160.186/redfish/v1/Managers/1/ActiveDirectory 3. patch data as below, { "AuthenticationEnabled": true, "AuthenticationOverSSLEnabled": false, "PortNumber": 389, "UserDomainName": "global.tesco.org", "Timeout": 10, "DCSAddress1": "10.127.70.141", "DCSAddress2": "10.127.70.140", "DCSAddress3": "172.17.198.236" } 4. the return code should be 200 -------------------------------------------------------------------------------------------------------- Filename: BMC_X10AST2400-C001MS_20231215_04.01_STD&STDsp.bin version: 4.01 Date: 12-15-2023 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.14 Java iKVM Viwer version : v1.69 r40 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [163399] ECO -- 8233 -- 04.00_(2023/08/10) -- Web -- Switch SMC RAKP, current RAKP Status and radio button are reversed Impact motherboard: ALL Affected functions: Validation: 1. Login web GUI -> Miscellaneous -> SMC RAKP 2. Click on Save, check Current RAKP status 3. Check Radio button 2. Category: Fix Description: [163779] ECO -- 8233 -- 04.00 -- user network privilege gets redirected in Remote Control iKVM/HTML5 and Power Control and Firmware Update when it should have View Only Impact motherboard: MBD-A2SDI-TP8F-P Affected functions: Firmware Update、Power Control Validation: 1. Go to Maintenance > Firmware Update 2. User will not redirect to main page. 3. Go to Remote Control > Power Control 4. User will not redirect to main page. 3. Category: Fix Description: [163705] After disable Virtual Media Port, Floppy Disk Choose File button is still enabled Impact motherboard: MBD-A2SDI-H-TF-P Affected functions: Floppy Disk Validation: 1. Go to Configuration > Port 2. Uncheck Virtual Media Port and Save 3. Go to Virtual Media > Floppy Disk 4. The Choose File button should be disabled -------------------------------------------------------------------------------------------------------- Filename: BMC_X10AST2400-C001MS_20230810_04.00_STD&STDsp.bin version: 4.00 Date: 08-10-2023 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.14 Java iKVM Viwer version : v1.69 r40 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [160082] ECO -- 8233 -- 03.98 -- Add and Modify User with username with a number give the message "The special characters are not allowed ! ,:'"#-;" Impact motherboard: MBD-A2SDI-H-TF-P MBD-A2SDI-TP8F-P Affected functions: Validation: 1. WebGUI -> Configuration -> Users. 2. Add new user with the name that contains number. Ex: test123. 3. Fill out other informations needed and Click Add button. 4. User should be added successfully. 2. Category: Fix Description: [160094] ECO -- 8233 -- 03.98 -- Error message "This port is in used.Please change the port number." is missing a space. Impact motherboard: All MBs. Affected functions: Validation: 1. UI > Configuration > Port 2. Default values should be: SSH port by default should be: 22 3. If it's 22, Change IKVM server port to 22. 4. Error message says "This port is in used.Please change the port number." 5. Modify Error message as "This port is in used. Please change the port number." -------------------------------------------------------------------------------------------------------- Filename: BMC_X10AST2400-C001MS_20230804_03.99_STD&STDsp.bin version: 3.99 Date: 08-04-2023 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.14 Java iKVM Viwer version : v1.69 r40 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [156014] [8720 -- ECO -- 3.98] Enclosing a username in causes it to appear as blank when logging in and in the Maintenance Event Log Impact motherboard: X10DRT-B Affected functions: Maintenance Event Log Validation: 1. Go to Configuration - Users 2. Add or modify a user with a username enclosed in angle brackets (e.g. ) 3.Login with the new username 2. Category: Fix Description: [158977] STD -- 17212 – 3.95 -- [Security] X10 Alerts feature doesn’t completely filter the user input then cause a command injection. [159186] STD -- 17212 -- 01.67 -- [Security] XSS attack in the modify_nm_policy function at X10 [159187] STD -- 17212 -- 01.67 -- [Security] XSS attack in the config_ssl_fw_reset function at X10 [159188] STD -- 17212 -- 3.98 -- [Security] XSS attack in the servh_storage_create and servh_storage_add function at X10 [159189] STD -- 17212 – 03.98 -- [Security] XSS attack in man_ikvm_html5_bootstrap and man_ikvm_html5_bootstrap_vm by exploiting the language cookie value at X10 Impact motherboard: All X10 MBs Affected functions: Validation: 1. Please contact Glen's team to verify the issues. 3. Category: Fix Description: [158245] - BRLY-2023-001 Command Injection attack [158585] - BRLY-2023-007 XSS attack [158907] - BRLY-2023-008 XSS attack [158908] - BRLY-2023-009 XSS attack [158909] - BRLY-2023-010 XSS attack [158910] - BRLY-2023-011 XSS attack [158911] - BRLY-2023-012 XSS attack Impact motherboard: All MBs. Affected functions: Validation: 1. Please contact Glen's team to verify the issue. 4. Category: Fix Description: CVE-2023-33413 Command Injection attack Impact motherboard: All MBs. Affected functions: Validation: 1. Please contact Glen's team to verify the issue. -------------------------------------------------------------------------------------------------------- Filename: BMC_X10AST2400-C001MS_20230424_03.98_STD&STDsp.bin version: 3.98 Date: 04-24-2023 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.14 Java iKVM Viwer version : v1.69 r40 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [147992] Legacy mode windows shutdown LAN1 LED OFF Impact motherboard: MBD-X10SRM-TF-P Affected functions: Validation: 1. Installed OS - en_windows_server_2019_updated_april_2021_x64_dvd_ef6373f0.iso 2. Plug the ethernet cable into BMC lan port and system lan port 1. 3. WebGUI -> Configuration -> Network 4. Check BMC lan mode is 'Failover' and active interface is 'Dedicated'. 5. Check both of its status is 'Connected'. 6. Boot up Windows OS -> Shut down by Windows memu button. 7. Check if activity LED of system lan 1 is on or not. 2. Category: Fix Description: [150003] ECO -- 8233 -- 3.95 -- Date and Time invalid Date February 31 message missing a space and period Impact motherboard: MBD-A2SDV-4C-LN8F-P MBD-A2SDV-8C-TLN5F-P Affected functions: Validation: 1. BMC Web -> Configuration -> Date and Time. 2. Select Data to February 31 2022. 3. Click button 'Save'. 4. Check if error message is correct. 3. Category: Fix Description: [149983] - ECO -- 8233 -- 3.95 -- Able to enter Modify User page with Anonymous user; inconsistent error message when add and delete Anonymous user Impact motherboard: MBD-A2SDV-4C-LN8F-P MBD-A2SDV-8C-TLN5F-P Affected functions: Validation: 1. BMC Web -> Configuration -> Users. 2. Select Anonymous. 3. Button "Add User", "Modify User" and "Delete User" should be disabled. 4. Category: Fix Description: [149891] ECO -- 8233 -- 3.95 -- Power Control Perform Power Cycle Server action fails Impact motherboard: MBD-A2SDV-8C-TLN5F-P Affected functions: Validation: 1. BMC Web -> Remote Control -> Power Control. 2. Select option 'Power Cycle Server' and click button 'Perform Action' 3. Check if action succeed or not. -------------------------------------------------------------------------------------------------------- Filename: BMC_X10AST2400-C001MS_20220930_03.97_STD&STDsp.bin version: 3.97 Date: 09-30-2022 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.14 Java iKVM Viwer version : v1.69 r40 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [145898] [IPMI ECO] Redfish automation has 1 failure: Test Primary NTP function failed to Reset Timezone [143768] X10SRD-F 03.96 Redfish Automation Tool check Copy Project Issue Link Impact motherboard: *MBD-X10SLD-F-P *MBD-X10SRD-F-P Affected functions: Validation: 1. Run Redfish automation test - Redfish API . Managers . NTP . Test Primary NTP Function 2. Category: Fix Description: [144197] ECO -- 8233 -- 3.95 -- A2SDV can add invalid duplicate username through smcipmitool Copy Project Issue Link Impact motherboard: *MBD-A2SDV-12C+-TLN5F-P *MBD-A2SDV-4C-LN8F-P Affected functions: Validation: 1. Download SMCIPMITool. 2. Add user ID 3 with user name 'X10BoardTest' Ex: ./SMCIPMITool $IP ADMIN ADMIN user add 3 'X10BoardTest' '#########' 4 3. Add user ID 4 with user name that is the same with user ID3 'X10BoardTest' Ex: ./SMCIPMITool $IP ADMIN ADMIN user add 4 'X10BoardTest' '#########' 4 4. User ID 4 should be not added successfully. 3. Category: Fix Description: Fixed BMC synchronizing system time failed issue after doing AC cycle. Impact motherboard: MBD-X10DRL-I-P Affected functions: Validation: 1. BMC WebGUI -> Configuration -> Data and Time -> NTP Disable -> Save 2. BIOS Menu -> Change System Date and Time. 3. Do AC Cycle. 4. BMC WebGUI -> Configuration -> Data and Time -> Check Data and Time are the same as system. 4. Category: Enhancement Description: Reset SSL certificate when user reset BMC to default. Impact motherboard: All X10 MBs Affected functions: Validation: 1. Reset BMC to default. 2. Check if SSL certificate is reset to new one or not. 5. Category: Fix Description: [146696] Shown User was added successfully when set user name to #### Impact motherboard: MBD-X10DRL-I-P Affected functions: Validation: 1. WebGUI -> Configuration -> Users. 2. Add new user with the name that contains character #. 3. Fill out other informations needed and Click Add button. 4. User should not be added successfully. 6. Category: Fix Description: [146759] Unable to read and show Bios version Impact motherboard: MBD-X10DRL-I-P Affected functions: Validation: 1. WebGUI -> Maintenance -> Factory default. 2. Select 'Remove current settings and restore to factory default' 3. Click Restore button and wait BMC reboot. 4. WebGUI -> System -> Click Reset button to make system reboot. 5. Wait system reboot complete. 6. WebGUI -> System -> Check if BIOS version and date appears or not. 7. Category: Fix Description: [146754] Window size doesn't follow Display Scale to change Impact motherboard: MBD-X10DRL-I-P Affected functions: Validation: 1. WebGUI -> Remote Control -> iKVM/HTML5 -> Click iKVM/HTML5 button. 2. Clicking Close button is necessary for changing any configurations. 8. Category: Fix Description: [146761] 404 return code after cancel FW upgrade progress Copy Project Issue Link Impact motherboard: MBD-X10DRL-I-P Affected functions: Validation: 1. WebGUI -> Maintenance -> Firmware Update. 2. Click Enter Update Mode button. 3. Click Cancel button. 4. Wait about 60~90 seconds. 5. Click link 'here' 6. New web page should redirect to BMC login page. -------------------------------------------------------------------------------------------------------- Filename: BMC_X10AST2400-C001MS_20220425_03.96_STD&STDsp.bin version: 3.96 Date: 04-25-2022 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r39 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [137277] - [SUM][ATT] Run Att failed with TC218 - OOB - UpdateBMC and UpdateBIOS by hostname Impact motherboard: MBD-X10DRH-C-P Affected functions: Validation: 1. Install curl. 2. curl -k -v -H "Host: test_fake_host" "https:///redfish/v1" 3. check if response is HTTP 200 OK or not. 2. Category: Fix Description: Fix Java iKVM working abnormally issue. Impact motherboard: MBD-X10DRH-C-P Affected functions: Validation: 1. BMC Web -> Remote Control -> Console Redirection 2. Click button 'Launch Console' 3. Check if Java iKVM works normally or not. 3. Category: Fix Description: [139874] [SUM v2.8.1 (20220331)] Test case 373 - In-Band - Test "Change LAN via BMC configuration" fail. Impact motherboard: MBD-X10DRU-I+-P Affected functions: Validation: 1.Run the latest SUMECO: TC373 4. Category: Enhancement Description: Upgrade JQuery to 3.5.1 Impact motherboard: All X10 MBs Affected functions: Validation: 1. Web UI full function test. -------------------------------------------------------------------------------------------------------- Filename: BMC_X10AST2400-C001MS_20211223_03.95_STD&STDsp.bin version: 3.95 Date: 12-23-2021 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r39 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: BIOSECO Test Case 502 system can't boot up correctly issue. [134157] A2SDI-H-TF 1.6 BIOS Automation tests [134108] [BIOS ECO 1.6] Automation tests Failure. [134029] [BIOS ECO 1.6] BIOS ECO Automation test failed [133685] BIOS Automation failed [133468] [ BIOSECO 1.6] Automation tests Failure. Impact motherboard: MBD-A2SDI-H-TF-P MBD-A2SDV-4C-LN10PF-P MBD-A2SDI-LN4F-P MBD-A2SDV-12C-NE008-P MBD-A2SDV-16C-NE008-P MBD-A2SDV-16C-TLN5F-P MBD-A2SDV-8C-NE008-P MBD-A2SDV-8C-TLN5F-P MBD-A2SDV-8CU-NE008-P MBD-A2SDV-12C+-TLN5F-P MBD-A2SDI-12C-HLN4F-P Affected functions: Validation: 1. Download sum 2.7.0 production version. 2. Run sum UpdateBIOS command with option --force_update Ex:./sum_2.7.0_Production_Linux_x86_64/sum -i $IP -u ADMIN -p ADMIN -c UpdateBIOS --file '$Bios_File' --force_update --reboot 3. Check if system can boot up correctly or not. or 1. Run BIOSECO test case 502 - Update BIOS when power status is off. 2. Check If test case 502 can PASS or not. 2. Category: Fix Description: iKVN/HTMK5 - Slider bar of display scale function is missing. Impact motherboard: MBD-A2SDI-H-TP4F-O Affected functions: Validation: 1. BMC Web -> Remote Control -> iKVM/HTML5 2. Click button 'iKVM/HTML5' 3. Options -> Preference 4. Check if slider bar exists or not. -------------------------------------------------------------------------------------------------------- Filename: BMC_X10AST2400-C001MS_20211001_03.94_STD&STDsp.bin version: 3.94 Date: 10-01-2021 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r39 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [126719] [Standard -- 8720 -- 3.92] FRU Chassis Types 0A-0F, 1A-1F appear as Undefined in Web Impact motherboard: MBD-X10DRC-LN4+-P Affected functions: Validation: 1. Use SMCIPMITool to write the FRU CT field to 0A-0F, 1A-1F 2. Login to Web UI and go to System/FRU Reading 3. Expected Result: Web UI shows the proper FRU CT value 2. Category: New feature Description: [ACL] Can't get nVIDIA A100-40GB via IPMI Sensor Impact motherboard: MBD-X10DRG-Q-P Affected functions: Validation: 1. Plug NVIDIA A100-40GB into MB. 2. WebGUI > Server Heath > Sensor Readings 3. Check if GPU Temp exists or not. 3. Category: Fix Description: Add retry mechanism for DCMI commands to prevent from interrupting automation test. Impact motherboard: MBD-X10SRW-F-P Affected functions: Validation: 1. Executes command 'ipmitool -H $IP -U $UID -P $PWD -I lanplus dcmi power reading' 100 times 2. Check if command success or not. 4. Category: Fix Description: [116528] Standard -- 8086 - v1.63 - Refresh button will re-mount unmounted floppy disk. Impact motherboard: X10 Affected functions: Validation: 1.Login in BMC Web Gui. 2.Go to [VM]->[Floppy] page 3.Upload valid file 4.Unmount disk 5.Press Refresh Button on the top right corner of the page 6.The page would not reload again 5. Category: Fix Description: [131142] - STD - 8948 - v3.94 - Fail to enable Dynamic DNS on IPMI Web Impact motherboard: MBD-X10SRW-F-P Affected functions: Validation: 1. Web GUI > Configuration > Date and Time 2. Set Primary NTP Server and Enable NTP > Save 3. Web GUI > Configuration > Dynamic DNS 4. Dynamic Update Enable > Save 5. Check if DDNS page working normally or not (should not be empty). 6. Category: Fix Description: [129981] STD -- 17212 -- 01.00.14 - Anonymous account or null value can be created on X11 and X12. [130390] STD -- 17212 -- 09.11.50 BETA - [Security] Buffer overflow in ipmi_lan ASF protocol. [130823] BETA -- 17212 -- 07.30.31 -- [Security] resolv.conf won't be deleted, it may cause a potentially DNS Hijacking. Impact motherboard: X10 Affected functions: Validation: 1. Please ask Sean team for verification. -------------------------------------------------------------------------------------------------------- Filename: BMC_X10AST2400-32M_20210528_03.93_STD&STDsp.bin version: 3.93 Date: 05-28-2021 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r39 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [125032] JAVA iKVM Viewer issue. Impact motherboard: X10DRT-PS. Affected functions: Validation: 1. IPMI Web > Remote Control > Console Redirection > Click button 'Launch Console' 2. Check Java iKVM Viewer working well or not? 2: Category: Fix Description: [124176] ECO -8223-- 03.91(08/06/2020) - Disable VM port, console redirection/HTML5 's virtual storage tab stil enabled Impact motherboard: X10DRH. Affected functions: Validation: 1. Log in IPMI Web 2. Configuration > Port > Disable 'Virtual Media Port' > Save. 3. Remote Control > Console Redirection. 4. Java iKVN > Virtual Media > Virtual Storage should be disabled (text color is gray). 5. Remote Control > iKVM / HTML5. 6. Tab 'Virtual Media' should not appear. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_392_20210319_unsigned&signed.bin version: 3.92 Date: 03-19-2021 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [115644] User will get incorrect sort result by clicking table title on BMC web page - Sensor Readings Impact motherboard: All X10 MBs. Affected functions: Validation: 1. Login BMC web page with ADMIN and correct password. 2. Go to page - Server Health -> Sensor Readings. 3. Click Reading (3rd Column Head) to sort sensor. 2. Category: Fix Description: Fixed verifying OEM security BIOS FW failed issue. Impact motherboard: X10DRC Affected functions: Validation: 1. Download OEM security BIOS FW from PB. ex: X10DRC9.c2.20200922.softlayer.B20_Signed 2. Webpage -> Maintenance -> BIOS Update 3. Category: Fix Description: smcipmitool fail via SMSTC Impact motherboard: All X10 MBs. Affected functions: Validation: 1. Use SMCIPMITOOL to update BIOS. 4. Category: Fix Description: [122585] - [SUM_2.5.2_20210112] The result of test case:315 display "Get Wrong completion code. FF (Undefined completion code=FFh)". Impact motherboard: All X10 MBs. Affected functions: Validation: 1. Run Automation Test Tool - SUMECO Test case 315. 2. Check if Test case 315 pass or not. 5. Category: Fix Description: [116543] Local BMC Password more than 19 characters are still accepted Impact motherboard: All X10 MBs. Affected functions: Validation: 1. WebGUI -> Configuration -> Users 2. Add / Modify User 3. Set Password and Confirm Password to kinponet2019kinponet2019. 4. Check if webpage pop up warning message or not. 6. Category: Fix Description: [123652] Power consumption 'High CT' and 'High NR' are incorrect issue. Impact motherboard: X10DRT_PS X10DRT_P X10DRT_P_10G Affected functions: Validation: 1. WebGUI -> Server Health -> Sensor Readings. 2. Click 'Show Thresholds' Button. 3. Check PW consumption 'High CT' and 'High NR' are 4500 or not. 7. Category: Fix Description: [123752] No sensor reading for AOC-MIBE6-m1CM Impact motherboard: X10DRT_PS Affected functions: Validation: 1. Plug AOC-MIBE6-m1CM into X10DRT_PS. 2. WebGUI -> check BIOS version is 3.3 (Build Time: 10/24/2020). If not, upgrade BIOS to version 3.3. 3. WebGUI -> Server Health -> Sensor Readings. 4. Check If AOC_NIC appears or not. 8. Category: Fix Description: Adjust the timeout of uploading BIOS for customer's environment that network speed is too slow. Web session timeout is 0, timeout of uploading BIOS will be 30 minutes. Web session timeout is less than 5, timeout of uploading BIOS will be 5 minutes. Impact motherboard: All X10 MBs. Affected functions: Validation: 1. Log in IPMI Web > Click on Maintenance > BIOS update > Choose File. 2. Use Tool to limit internet download and upload transfer speeds. Ex: wondershaper. 3. Click 'Upload BIOS' button. 4. Wait 5 minutes. 5. Use Tool to recover internet download and upload transfer speeds. 6. See if uploading BIOS process is okay or not. 9. Category: Fix Description: [124176] Disable VM port, console redirection/HTML5 's virtual storage tab still enabled Impact motherboard: All X10 MBs. Affected functions: Validation: 1. Log in IPMI Web > Configuration > Port. 2. Set 'Virtual Media Port:' stauts to unchecked and save. 3. Remote Control > iKVM/HTML5 > Click button 'iKVM/HTML5' 4. Check tab 'Virtual Media' disabled or not. 10. Category: Fix Description: Fix BRCM3108 temperature is disappeared issue after system reset. Impact motherboard: X10SRA-F Affected functions: Validation: 1. Log in IPMI Web > Server Health > Sensor Readings. 2. Check BRCM3108 temperature appeared or not. 3. System > Clcik 'reset' button. 4. Wait system booting up. 5. Check BRCM3108 temperature appeared or not again. 11. Category: Fix Description: Fix switching other languages on webpage worked abnormally issue. Impact motherboard: All X10 MBs. Affected functions: Validation: 1. Log in IPMI Web > Server Health > Sensor Readings. 2. Switch other language. 3. Check language changed or not. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_391_20200806_unsigned&signed.bin version: 3.91 Date: 08-06-2020 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [109959] [IPMI: 3.88 ]Run redfish automation fail. Impact motherboard: A2SDI. Affected functions: Validation : 1. Login WebGUI. 2. Cancel all the option and update BMC firmware. 3. AC cycle one time. 4. BMC firmware Revision become to Unknown in under bios page. 2. Category: Fix Description: [110181] [IPMI: 3.88] Use "remove the current settings and restore the factory default" settings, the ipmi firmware will be changed to unknown. Impact motherboard: A2SDI. Affected functions: Validation : 1. Login WebGUI. 2. Cancel all the option and update BMC firmware. 3. AC cycle one time. 4. BMC firmware Revision become to Unknown in under bios page. 3. Category: Fix Description: [114777] The rt1 reading is lower than system ambient. Impact motherboard: A2SDV. Affected functions: Validation : 1. Setup the test environment temperature. 2. Login WebGUI. 3. Check the system temp value from sensor reading page. 4. Category: Fix Description: [115269] [IPMI:3.90] Update BMC not settings reserved , the ipmi firmware will be changed to unknown when ac on/off. Impact motherboard: A2SDI. Affected functions: Validation : 1. Login WebGUI. 2. Cancel all the option and update BMC firmware. 3. AC cycle one time. 4. BMC firmware Revision become to Unknown in under bios page. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_390_20200730_unsigned&signed.bin version: 3.90 Date: 07-30-2020 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [113925] Destination address still exists after updating FW by SMCIPMITool. Impact motherboard: All X10 MBs. Affected functions: Validation : 1. Login WebGUI. 2. Set one Alert item. 3. Update BMC FW with not preserve user configure. 4. After the BMC FW update, check Alert setting is not preserved. 2. Category: Add Description: Add support Winbond W25Q128JWSIQ SPI flash. Impact motherboard: X10SLH-F. Affected functions: Validation : 1. Check the MB mount the Winbond W25Q128JWSIQ SPI flash (IPMI). 2. Login Web GUI. 3. Update the FW by Web GUI. 4. Check the FW update success. 3. Category: Fix Description: Fixed the "PW consumption" show fail issue on SNMP show. Impact motherboard: X10DRT-PT. Affected functions: Validation : 1. Login Web GUI. 2. Enable the SNMP function. 3. Check the SNMP browser's "PW consumption" value is matched with Web GUI. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_389_20200623_unsigned&REDFISH_X10_389_20200624_signed.bin version: 3.89 Date: 06-23-2020 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [107520] ECO 23532 BPN-SAS3-217HQ2 eco FW update issue, "BMC web update flash FW show progress is 0%". Impact motherboard: All support the "Nuvoton MCU FW update" X10 MBs. Affected functions: Validation : 1. Login Web GUI. 2. Update the EC FW from Nuvoton web page. 3. Check update progress percentage. 2. Category: Fix Description: [107725] [ipmiview] KVM console issues (Resize)(Left ctrl+U not work but Right ctrl+U Pass)(Fail to launch on RHEL 8.0 but RHEL 7.6,SLES12SP4 and Win Pass) Impact motherboard: All X10 MBs. Affected functions: Validation : 1. Login Web GUI. 2. Open the KVM from Web GUI. 3. Check the key behavior. 3. Category: Fix Description: [110181] [IPMI: 3.88] Use "remove the current settings and restore the factory default" settings, the ipmi firmware will be changed to unknown, Add the 'P' key can be into boot command line method. Impact motherboard: A2SDI-LN4F-P. Affected functions: Validation : 1. Login Web GUI. 2. Select factory default by Web. 3. System reset to boot on BIOS menu. 4. Check IPMI version on BIOS menu. 4. Category: Fix Description: [108325] [IPMI: 3.88] AOC SAS sensor disappears from IPMI sensor reading. Impact motherboard: All X10 MBs. Affected functions: Validation : 1. Install AOC-S3108 2. Run the AC on/off stress. 3. Check sensor. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_388_20200221_unsigned&signed.bin version: 3.88 Date: 02-21-2020 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: System not critical when PSU sensor is not plugged in Impact motherboard: All X10 MBs. Affected functions: Validation : 1.Log into WebGUI 2.Unplug the PSU sensor 3.Check sensor reading and system status 2. Category: Fix Description: [103863] Destination address still exist after FD. Impact motherboard: All X10 MBs. Affected functions: Validation : 1. Login WebGUI. 2. Set one Alert item. 3. Update BMC FW with not preserve user configure. 4. After the BMC FW update, check Alert setting is not preserved. 3. Category: Fix Description: [104224] When the Maintenance Event Log is full, if the event log has "Activate_BIOS_Product_Key". The table will wrong show. Impact motherboard: All X10 MBs. Affected functions: Validation : 1. Login Web GUI. 2. Let Maintenance Event Log full. 3. Check the event log still format correct. 4. Category: Fix Description: [105028] Standard -- 8233 -- 3.87 -- Update BIOS function Can't proceed due to 3.87 fw don't support 2020 time format. Impact motherboard: All support the "BIOS update function" of X10 MBs. Affected functions: Validation : 1. Login Web GUI. 2. Update the build date after 2020 BIOS. 3. Check update successful or not. 5. Category: Fix Description: [102002] [Redfish] SSH Port can be PATCHed to an already existing/default port value. Impact motherboard: All X10 MBs. Affected functions: Validation : 1.Make a PATCH request to /redfish/v1/Managers/1/NetworkProtocol/ with body {"SSH": {"Port": ExistingPortNum}}, where ExistingPortNum are the values in the other ports (These should be 80, 443, 5900, 623, and 22) 2.When testing multiple ports, if any fails, please make sure to return the failed port to the original default value 6. Category: Fix Description: [103489] [Redfish] Cannot PATCH Active Directory Role Group Domain with PERIOD Impact motherboard: All X10 MBs. Affected functions: Validation : 1.can patch redfish/v1/Managers/1/ActiveDirectory/RoleGroups/* 7. Category: Fix Description: [114777] The rt1 reading is lower than system ambient. Impact motherboard: A2SDV. Affected functions: Validation : 1. Setup the test environment temperature. 2. Login WebGUI. 3. Check the system temp value from sensor reading page. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_387_20200108_unsigned&signed.bin version: 3.87 Date: 01-08-2020 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [102459] Sensor "MB_10G Temp" is not present. Impact motherboard: MBD-A2SDI-LN4F-P Affected functions: Validation : 1. Login WebGUI. 2. Check the sensor reading page. 3. In the A2SDi-LN4F the "10G LAN" will be hidden. 2. Category: Fix Description: [102277] [IPMI ECO 3.84] There is "Thermal trip event" when do AC on/off stress Impact motherboard: A2SDV-16C-TLN5F-P Affected functions: Validation : 1. Run the AC on/off stress. 2. Login WebGUI. 3. Check the SEL log. 4. The SEL will can not record the "Thermal trip event". 3. Category: Fix Description: [103882] ECO -- 8233 -- 3.86-- FRU value "13" Chassis Type is shows different from SMCIPMITool FRU to IPMI web FRU. Impact motherboard: All X10 MBs. Affected functions: Validation : 1.Try to write FRU value in CT 2.Please type-in value "13" 3.Checking the "Chassis Type" field of web FRU display and compare to FRU. 4. Category: Fix Description: [103884] ECO -- 8233 -- 3.86-- FRU value "18"and"19" Chassis Type is shows Undefined in IPMI web FRU Impact motherboard: All X10 MBs. Affected functions: Validation : 1.Try to write FRU value in CT 2.Please type-in value "18"and"19" 3.Checking the "Chassis Type" field of web FRU display screen. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_386_20191115_unsigned&signed.bin version: 3.86 Date: 11-15-2019 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: New Feature Description: BMC FW solution to program and store unique pre-programmed password. Impact motherboard: All X10 MBs Affected functions: Validation: Raw 0x30 0x74 0x01 to set unique password 1) ipmitool -H -U ADMIN -P ADMIN 0x30 0x74 0x1 0x32 0x77 0x73 0x78 0x23 0x45 0x44 0x43 (2wsx#EDC) Raw 0x30 0x74 0x01 to get the status 1) ipmitool -H -U ADMIN -P ADMIN 0x30 0x74 0x1 Factory default on the Web 2. Category: Fix Description: [101662] SEL recorded wrong location of failing DIMM. Impact motherboard: X10OBI. Affected functions: Validation : 1. The failed DIMM is installed on any location. 2. Login WebGUI. 3. Check the SEL log and check the position correct. 3. Category: Fix Description: [101314] IPMI - Power Fail LED Not Working. Impact motherboard: X10SLD-F-P Affected functions: Validation : 1. Let PSU poewr fail. 2. Check Chassis Power fail LED status. 3. Check on board power fail LED status. 4. Category: Fix Description: The hostname will show "SMC-bs_2019-10-17_11:28:41" after update IPMI FW. Impact motherboard: All X10 MBs Affected functions: Validation : 1. Login IPMI Web. 2. Set Hostname with long string on Network page. 3. Logout and Login again. 4. Check the "Host Identification" information formation correct or not. 5. Category: Fix Description: [101559] [IPMI 3.83 ECO] Unable to update SMC3108 FW from IPMI Impact motherboard: X10 MB that suitable for AOC-S3108L-H8iR Affected functions: Validation : 1. Install one AOC-S3108L-H8iR and prepare 2 different version firmware of the card 2. Flash the card's firmware via BMC's WEB: Server Health->Storage Monitoring->Controller information button->ROM Update 3. Check if firmware update can be successfully finished 6. Category: Fix Description: [103105] IPMI - User name can be modified with space. Impact motherboard: All X10 MBs. Affected functions: Validation : 1. Login WebGUI 2. Go to Users under Configuration page 3. Create an user account and then save 4. Modify the user name with space 7. Category: Fix Description: [103500] [IPMI ECO 3.84] The iKVM display "Virtual Media",this is wrong Impact motherboard: All X10 MBs. Affected functions: Validation : 1. Login WebGUI 2. Remote control -> iKVM/HTML5 3. Check the launch page function bar 4. The function bar should be "Virtual Keyboard", "Record", "Macro", "Options", "User List", "Capture", "Power Control", "Help" -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_385_20190926_unsigned&signed.bin version: 3.85 Date: 09-26-2019 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: Issue [101315] IPMI - SOL window cannot launch. Impact motherboard: All X10 MBs. Affected functions: Validation : 1. Check the "Launch SOL" button disabled while login web by AD or Radius or LDAP. 2. Category: Fix Description: Merge X11 SMASH overflow and rearrange method. Impact motherboard: All X10 MBs. Affected functions: Validation : 1. SSH into SUT's SMASH. 2. Input 404 or more characters and press enter. 3. Check the SMASH still connection or not. 3. Category: Fix Description: Issue [101973] [IPMI ECO 3.84] The display is formatted correctly when logging with long AD name Impact motherboard: *MBD-X10SDE-DF-P Affected functions: Validation : 1.The display is formatted correctly when logging with long AD name 4. Category: Fix Description: Issue [101633] Fix PSU1, PSU5 sensor reading error when plug/unplug PSU modules Impact motherboard: All X10OBi MBs. Affected functions: Validation : 1. Prepare X10OBi system with 5 power module installed 2. Unplug PSU1 power core or remove PSU1 module Check if PSU1 sensor reading is not failed or absent Check if PSU5 sensor reading is still normal or present 3. Install back PSU1 module and power core. 4. Unplug PSU5 power core or remove PSU5 module Check if PSU5 sensor reading is not failed or absent Check if PSU1 sensor reading is still normal or present 5. Category: Fix Description: Issue [102071] IPMI - Correct message should be displayed when ikvm port is unchecked. Impact motherboard: All X10 MBs. Affected functions: Validation : 1. Login WebGUI. 2. Go to Port under Configuration page. 3. Uncheck IKVM Server Port. 4. Click Save button. 5. Go to Ikvm/html5 under Remote Control page. 6. Click Ikvm/html5 button. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_384_20190830_unsigned&signed.bin version: 3.84 Date: 08-30-2019 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [99462] Long AD domain name display issue Impact motherboard: All X10 MBs. Affected functions: Validation : 1.When logging with long AD name, the display is formatted correctly. 2. Category: Fix Description: Can't immediately get the setting port number after changing the Virtual Media port. Impact motherboard: All X10 MBs. Affected functions: Validation : 1. Setting the Virtual Media port to new number. 2. Immediately get back the Virtual Media port number and check it. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_383_20190815_unsigned.bin version: 3.83 Date: 08-15-2019 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fixed Description: Fix Supermicro BMC Virtual Media Multiple Vulnerabilities. Impact motherboard: All MBs. Affected functions: Validation: 1. Please contact Eclypsium to get the valiation proposal and ISO mount correctable. 2. Category: Fixed Description: [100290] IPMI- Sensor reading are abnormal after sorting Impact motherboard: All Affected functions: Validation: 1. Click "Show Thresholds" button in sensor readings page. 2. Click column header to sort by threshold. 3. The sensors should be sorted by the selected column. 3. Category: Fixed Description: [100545] [BIOS ECO] The memory error location in IPMI SEL didn't match with MB silkscreen. Impact motherboard: X10QBL Affected functions: Validation: 1. Click the memory error location in IPMI SEL match with MB silkscreen or not. 4. Category: Enhancement Description: [100491] - [Feature Request] Populate NAS-Identifier (rfc2865,5.32.0) with BMC-specific string Impact motherboard: All MBs. Affected functions: Validation: 1. To capture packets with wireshark or tcpdump. 2. To check NAS-Identifier attribute in Access-Request packets. 5. Category: Fixed Description: [101115] - CPU throttle does not de-assert after CPU overheat Impact motherboard: X10OBI. Affected functions: Validation: 1. Let CPU into process hot and get the SEL event log. 2. Cooling down CPU temperature and check the SEL event log. 6. Category: Fixed Description: SEL show error message after AOC-S3108 update firmware Impact motherboard: MBs with broadcom 3108 cards instealled. Affected functions: Validation : 1.Update BMC FW. 2.The event log should not be seen. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_382_signed&unsigned.bin version: 3.82 Date: 07-30-2019 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: Fix Supermicro BMC Virtual Media Multiple Vulnerabilities. Impact motherboard: All MBs. Affected functions: Validation: 1. Please contact Eclypsium to get the valiation proposal. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_381.bin version: 3.81 Date: 05-28-2019 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Feature Description: Log mutiple HDD absent at the same exact second event as a StorageController type event which is used to remind the user about possible component-relavant problem(e.g., storage controller, cable, or backplane error) Impact motherboard: The MBs which support Broadcom 3108 card FW update function. Affected functions: Event log Validation: [Note] Basically this feature is mainly to capture the situation that large amount of HDD absence at the same exact second. Below steps are used to simulate but not the true situation. 1. Pull out 4 or more HDD at the same exact second 2. Check BMC WEB UI - "Server Health / Health Event Log" to see if there is an assertion of "Management Subsystem Health" event for storage controller to tell bursting lost 3. Push back all pulled HDD at the same exact second 4. Check respective de-assertion event 2. Category: Feature Description: Support Nivida T4, RTX 5000, 6000 and 800. Impact motherboard: X10DRC, X10DRH_LN4, X10DRX, X10DRU, X10QRH_PLUS, X10SRM, X10DRH, X10SRW, X10SRG, X10OBI, X10DRU_XLL, X10DRG_O, X10DRT_P, X10DRG_H, X10QBI, X10DRU_I_PLUS, X10DRT_PS, X10DRT_L, X10DRG_Q Affected functions: Event log Validation: 1. Insert these GPU. 2. Check the sensor reading is normal. 3. Check the GPU threshold if matches with the latest GPU thermal guide. 4. Heat the GPU and check if the GPU temperature rise accordingly. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_380.bin version: 3.80 Date: 02-14-2019 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: Degraded & unavailable sel event comes out after Broadcom 3108 FW is updated. Impact motherboard: The MBs which support Broadcom 3108 card FW update function. Affected functions: Validation : 1. Update Broadcom 3108 card though BMC. 2. System reboot. 3. The sel event should not appear when BMC sensors are polling. 2. Category: Enhancement Description: Patch for CVE-2019-6260 pantsdown. Impact motherboard: All MBs Affected functions: Validation: 1. Socflash cannot work after booting to all kinds of OSs. 2. Use socflash. BMC should be protected. 3. Run SMSTC, and it should be passed. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_379.bin version: 3.79 Date: 01-18-2019 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_12_20.xlsx 1. Category: Fix Description: [95034][IPMI ECO V3.78 ]One space is needed between two words. Impact motherboard: All MBs. Affected functions: Validation : Go to 'Maintenance' > Click on 'System Event Log' > Look at 'Log Table' menu > I can see the issue, it looks like this '3Entries' 2. Category: Fix Description: [94948] [IPMI ECO] Can't set NM power policy successfully by Redfish API. [94947] [IPMI ECO] I can get NM information by Redfish API but this platform didn't support NM. Impact motherboard: All MBs which BIOS ME for BMC to commnuicate successfully. Affected functions: Validation : 1. Issue the following request with PATCH method and expect to receive a response with "Successfully Completed Request" when "PowerLimit" is configured from 0 to 32767. URL: https://{BMC IP}/redfish/v1/Systems/1/SmcNodeManager 2. Check if "PowerLimit" value is set and matches what you set in step 1. 3. Category: Fix Description: [93767] Fix PSU Info lost problem Impact motherboard: X10OBi Affected functions: N/A Validation: 1. Run SUM -c GetPsuInfo and see if 1st~5th PSU are read well. 4. Category: Fix Description: Use SMCIPMITOOL to add AD group name & domain, the function fails. Impact motherboard: All MBs. Affected functions: Validation : 1.Input "ipmi oem x10cfg ad add 1 PG_IS_DC_WINDOWS_SERVER_ADMIN ttg.global 4Done" by SMCIPMITOOL. 2.Input "ipmi oem x10cfg ad list" by SMCIPMITOOL. 3.The corresponding Group Name & Grou Domain, it should display the above inputs. 5. Category: Fix Description: java ikvm can't be opened when use domain name to login BMC Impact motherboard: All MBs. Affected functions: Validation : 1.set bmc domain name and connect to BMC. 2.launch java ikvm 6. Category: Fix Description: Duplicated events related to BRCM3108 occur at the same time Impact motherboard: MBs that are suitable for 3108 and really install one on it Affected functions: Event logs are duplicated Validation : 1. Install 4 drives and BRCM-3108 2. Create a RAID 1 with 2 of the physical drives 3. Remove 1 of the member drive of above RAID 1 4. Check the RAID 1 to be degraded, then delete this RAID 1 5. The important step is here. Insert the previously removed physical drive and check if the HDD error log exists. 6. Then reboot BMC to see the duplicated logs 7. Description: Enhancement Migrated IPMI Event Log to the URL "redfish/v1/Systems/1/LogServices" in Redfish. Renamed the function name from "Event Log" to "Health Event Log" in Redfish & Web UI. Impact motherboard: All MBs. Validation : 1.Launch Redfish client tool 2.Access the following URLs to verify System Management Log function: GET https://x.x.x.x/redfish/v1/Systems/1/LogServices GET https://x.x.x.x/redfish/v1/Systems/1/LogServices/Log1 GET https://x.x.x.x/redfish/v1/Systems/1/LogServices/Log1/Entries GET https://x.x.x.x/redfish/v1/Systems/1/LogServices/Log1/Entries/[entry num] POST https://x.x.x.x/redfish/v1/Systems/1/LogServices/Log1/Actions/LogService.ClearLog 3.Access this page in BMC Web: BMC Web -> Server Health -> Health Event Log 8. Category: Fix Description: KCS/sensor reading/some commands doesn’t work. Impact motherboard: All MBs. Affected functions: Validation : 1.Do Cburne on / off testing. 2.Check if KCS function, sensor reading and commands from RMCP work properly. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_378.bin version: 3.78 Date: 10-04-2018 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_08_28.xlsx 1. Category: Fix Description: [94055] Redfish - unable to open 4th IKVM Session via redfish Impact motherboard: All MBs. Affected functions: Validation : 1. Launch ikvm session thru redfish. GET /redfish/v1/Managers/1/IKVM 2. Open the response URI in browser 3. Repeat 1. 2. Steps for four times 2. Description: Enhancement (workaround). Stop 3008/3216 supported. [93799] No LSI 3008 sensor on IPMI sensor page. [93676] Unable to detect "AOC_SAS_Temp" "HDD Temp" "HDD Status" and "Storage Monitor" status with Broadcom 3008/3216. [92350] Unable to detect "AOC_SAS_Temp" "HDD Temp" "HDD Status" and "Storage Monitor" status with Broadcom 3008/3216. [92349] BETA_REDFISH_X10_BRCM_3008_3216_976_20180704: Storage Monitoring Does not work with latest X10DRU-i+ BIOS. [84601] Can't show LSI3008 card sensor reading in IPMI WebGUI. Impact motherboard: All MBs. Validation : Install AOC-3008-L8e to check if BMC does not show sensors "Storage Monitoring" submenu. 3. Category: Enhancement Description: The MAC address format goes back to "xx:xx:xx:xx:xx:xx" to prevent backward compatibility. [93968] IPMI BMC/Onboard LAN MAC address should be xx:xx:xx:xx:x:xx. Impact motherboard: All MBs. Affected functions: Validation : 1. Check the MAC format in IPMI WebGUI. 2. It should be "xx:xx:xx:xx:xx:xx". 4. Category: Fix Description: [93621] IPMI BMC/Onboard LAN MAC address should be 00:00:00:00:00:00. [93510] IPMI BMC/Onboard LAN MAC address should be 00:00:00:00:00:00. Impact motherboard: All MBs Affected functions: Validation : 1. Login the BMC web and check onboard LAN mac address format. 5. Description: Fix [92864] The format of an IP address is inconsistent from System page. Impact motherboard: All MBs. Validation : 1. Check the IP address format in the top page. 6. Description: Fix [92848] One space is needed between two words. Impact motherboard: All MBs. Validation : 1. Check the Alert page in the WebGUI. 7. Category: New Features Description: Add parameter (SkipCheckingME) for BIOS EnterUpdateMode in Redfish to skip ME checking. Impact motherboard: All MBs which support bios upddate function. Affected functions: Validation : 1. Enter BIOS update mode by issuing the following request with POST method and expect to receive a response with "Successfully Completed Request" URL: https://{BMC_IP}/redfish/v1/UpdateService/SmcFirmwareInventory/BIOS/Actions/SmcFirmwareInventory.EnterUpdateMode Request body: { "SkipCheckingME": true } 2. Upload BIOS image by issuing the following request with POST method and expect to receive a response with "Successfully Completed Request" The content type must be "multipart/form-data" URL: https://{BMC_IP}/redfish/v1/UpdateService/SmcFirmwareInventory/BIOS/Actions/SmcFirmwareInventory.Upload Request header: Content-Type = multipart/form-data Request body: Since header indicate "form-data", please add a form parameter as "File" Parameter name: don't care Paremeter file: browse BIOS firmware file to attach 3. Start to update BIOS by issung the following request with POST method and expect to receive a response with "Successfully Completed Request" 3 parameters - PreserveME PreserveNVRAM PreserveSMBIOS are required in the request body. URL: https://{BMC_IP}/redfish/v1/UpdateService/SmcFirmwareInventory/BIOS/Actions/SmcFirmwareInventory.Update Example request body in JSON: { "PreserveME" : true, "PreserveNVRAM" : true, "PreserveSMBIOS" : true } 4. Check the BIOS update status by issuing the following request with GET method and expect to receive a response with BIOS information. URL: https://{BMC_IP}/redfish/v1/UpdateService/SmcFirmwareInventory/BIOS 8. Category: New Features Description: TaskService feature is supported during BIOS, BMC and Broadcom storage controller update in Redfish. Impact motherboard: The MBs which support BIOS updates can support redfish BIOS update. The MBs which support Broadcom 3108 card updates can support redfish Broadcom 3108 card FW update. Affected functions: Validation : 1. Issue the following request with GET method and expect to receive a response with TaskService information. URL: https://{BMC IP}/redfish/v1/TaskService 2. Issue the following request with GET method and expect to receive a response with Tasks information and members. URL: https://{BMC IP}/redfish/v1/TaskService/Tasks 3. Issue the following request with GET method and expect to receive a response with Task information and messages. URL: https://{BMC IP}/redfish/v1/TaskService/Tasks/[task_id] 4. Configure "ServiceEnabled" parameter of TaskService by issuing the following request with PATCH method and expect to receive a response with "Successfully Completed Request". 1 parameter: "ServiceEnabled" can be configured to true or false is required in the request body. URL: https://{BMC IP}/redfish/v1/TaskService Example request body in JSON: { "ServiceEnabled": true } 9. Category: New Features Description: Node Manager feature is supported in Redfish. Impact motherboard: All MBs which BIOS ME for BMC to communicate successfully. Affected functions: Validation : 1. Issue the following request with GET method and expect to receive a response with Node Manager information. URL: https://{BMC IP}/redfish/v1/Systems/1/SmcNodeManager 2. Configure "PowerLimit" of Node Manager by issuing the following request with PATCH method and expect to receive a response with "Successfully Completed Request". 3 parameters: "DomainID" must be configured to "Entire platform" "PolicyID" must be configured to 1 "PowerLimit" can be configured from 0 to 32767 are required in the request body. URL: https://{BMC IP}/redfish/v1/Systems/1/SmcNodeManager Example request body in JSON: { "Policy": { "DomainID": "Entire platform", "PolicyID": 1, "PowerLimit": 1100 } } 3. Clear all policies by issuing the following request with POST method and expect to receive a response with "Successfully Completed Request". URL: https://{BMC IP}/redfish/v1/Systems/1/SmcNodeManager/Actions/SmcNodeManager.ClearAllPolicies Request body: N/A 10. Category: New Features Description: New redfish feature for GUID/BoardID in Redfish. Impact motherboard: All MBs. Affected functions: Validation : 1. Issue the following request with GET method. URL: https://{BMC IP}/redfish/v1/Chassis/1 2. Check if there are "GUID" and "BoardID" in "Oem" category. 11. Category: New Features Description: New redfish feature for event data extension in Redfish. Impact motherboard: All MBs. Affected functions: Validation : 1. Issue the following request with GET method. URL: https:///redfish/v1/Managers/1/LogServices/Log1/Entries/[Entry_id] 2. Check if there is "RawEventData" in "Oem" category. 12. Category: Enhancement Description: Change FirmwaveInventory to SmcFirmwaveInventory to prevent user confused with redfish standard define. Impact motherboard: All MBs. Affected functions: Validation : 1. Check info in /redfish/v1/UpdateService/SmcFirmwareInventory /redfish/v1/UpdateService/SmcFirmwareInventory/BMC/Actions/SmcFirmwareInventory.EnterUpdateMode /redfish/v1/UpdateService/SmcFirmwareInventory/BMC/Actions/SmcFirmwareInventory.Upload /redfish/v1/UpdateService/SmcFirmwareInventory/BMC/Actions/SmcFirmwareInventory.Update /redfish/v1/UpdateService/SmcFirmwareInventory/BMC/Actions/SmcFirmwareInventory.Cancel /redfish/v1/UpdateService/SmcFirmwareInventory/BIOS /redfish/v1/UpdateService/SmcFirmwareInventory/BIOS/Actions/SmcFirmwareInventory.EnterUpdateMode /redfish/v1/UpdateService/SmcFirmwareInventory/BIOS/Actions/SmcFirmwareInventory.Upload /redfish/v1/UpdateService/SmcFirmwareInventory/BIOS/Actions/SmcFirmwareInventory.Update /redfish/v1/UpdateService/SmcFirmwareInventory/BIOS/Actions/SmcFirmwareInventory.Cancel /redfish/v1/UpdateService/SmcFirmwareInventory/HARAIDController.[controller_num] /redfish/v1/UpdateService/SmcFirmwareInventory/HARAIDController.[controller_num]/Actions/SmcFirmwareInventory.EnterUpdateMode /redfish/v1/UpdateService/SmcFirmwareInventory/HARAIDController.[controller_num]/Actions/SmcFirmwareInventory.Upload /redfish/v1/UpdateService/SmcFirmwareInventory/HARAIDController.[controller_num]/Actions/SmcFirmwareInventory.Update /redfish/v1/UpdateService/SmcFirmwareInventory/HARAIDController.[controller_num]/Actions/SmcFirmwareInventory.Cancel 13. Category: Fix Description: [X10DRX]Fix get 3.3VCC and 3.3VSB adc value too low issue. Impact motherboard: X10DRX Affected functions: Validation : 1. Check the SDR Web page. 14. Category: Fix Description: Correct SNMP behavior and make it identical with X11. Impact motherboard: All MBs Affected functions: Validation : 1. Use SNMP walk to go through the MIB tree. 2. Compare with X11 and the OID should be identical. 15. Category: New Features Description: Support Redfish TaskMonitor Impact motherboard: All MBs. Validation : 1. For any POST action supports TaskService, actions such as BMC update, BMC update, Storage card FW update Check response http header of POST action to find random TaskMonitor URL 2. GET /redfish/v1/TaskMonitor/ to check TaskMonitor status When action is still running, return http status code of TaskMonitor is 202 When action is finished, return http status code of TaskMonitor is 200 When action is finished, this TaskMonitor URL will be deleted automatically after 1 minute or onece status 200 is read. 16. Category: New Features Description: Implement redfish APIs for SSM (ticket#299-00-180927-001) Impact motherboard: All MBs. Validation : please reference 299 form. 17. Category: New Features Description: Implement redfish APIs for SUM (ticket#299-00-180927-002) Impact motherboard: All MBs. Validation : please reference 299 form. -------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_377.bin version: 3.77 Date: 07-27-2018 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_03_16.xlsx 1. Category: Features Description: New redfish firmware inventory (3108 storage controller) to update firmware is suppoted. Please also refer new Redfish document - " Redfish_API_full_list_2018_03_16.xlsx " Impact motherboard: MBs that are suitable for 3108 and really install one on it Affected functions: Update 3108's ROM via Redfish Validation : Before test firmware update, you need to install the DHC (By Restlet) Chrome extension: https://chrome.google.com/webstore/detail/restlet-client-dhc/ 1. Enter 3108 update mode by issuing the following request with POST method and expect to receive a response with "Successfully Completed Request" URL: https://{BMC_IP}/redfish/v1/UpdateService/FirmwareInventory/HARAIDController.{controller_num}/Actions/Oem/FirmwareInventory.EnterUpdateMode Request body: N/A 2. Upload 3108 ROM by issuing the following request with POST method and expect to receive a response with "Successfully Completed Request". The content type must be "multipart/form-data" URL: https://{BMC_IP}/redfish/v1/UpdateService/FirmwareInventory/HARAIDController.{controller_num}/Actions/Oem/FirmwareInventory.Upload Request header: Content-Type = multipart/form-data Request body: Since header indicate "form-data", please add a form parameter as "File" Parameter name: don't care Paremeter file: browse ROM file to attach 3. Start to update 3108 by issung the following request with POST method and expect to receive a response with "Successfully Completed Request" URL: https://{BMC_IP}/redfish/v1/UpdateService/FirmwareInventory/HARAIDController.{controller_num}/Actions/Oem/FirmwareInventory.Update Request body: N/A 4. Check the 3108 update status by issuing the following request with GET method and expect to receive a response with BIOS information. URL: https://{BMC_IP}/redfish/v1/UpdateService/FirmwareInventory/HARAIDController.{controller_num} 5. Cancel is doable in some stages once you see it is shown in the response payload every time you GET this resource information on - " https:///redfish/v1/UpdateService/FirmwareInventory/BMC ". If shown there, it will be the following URL for you. URL: https://{BMC_IP}/redfish/v1/UpdateService/FirmwareInventory/HARAIDController.{controller_num}/Actions/Oem/FirmwareInventory.Cancel 2. Description: Fix [92034] [IPMI 3.76] Inconsistency in BMC MAC address format. Impact motherboard: All MBs. Validation : 1. Check the MAC format in IPMI WebGUI. 2. It should be "xx-xx-xx-xx-xx-xx". 3. Category: Feature Description: BMC support to monitor Broadcom storage controller 3008/3216 (HBA / Host Bus Adapter) 1. Controller temperature 2. Attached physical drive temperature 3. Attached physical drive status Impact motherboard: All MBs suitable and support BRCM 3008/3216 Affected functions: Monitor 3008/3216 in sensor list and generate related event logs by threshold or status is met or triggered Validation : 1. Install 1~3 AOC-S3008L-L8E(AOC-S3216L-L16iT) 2. Check if 3008's firmware in IT mode (you can refer: FW Version -> 13.00.02.00 BIOS Version -> 08.31.00.00_15.00.02.00) And for 3216 you can refer: FW Version -> 14.00.00.00 BIOS Version -> 08.31.03.00_16.00.00.00) 3. Boot system and check if BIOS can detect these 3008/3216 or not, if yes, go next (if not, please check BIOS) 4. After system booted, check if BMC can detect 3008/3216 or not. 4-1. Check following submenues -> "Server Health - Sensor Readings" and "Server Health - Storage Monitoring" 4-2. Heat or cool temperature of controller or hdd to check "Server Health - Sensor Readings" 4-3. Insert or remove hdd to check "Server Health - Sensor Readings" and "Server Health - Event Log" 5. Redfish APIs: Verify following redfish APIs and operations using POSTMAN/Curl/Python script Item Detail GET /redfish/v1/Chassis/HBA.[contoller_num].StorageEnclosure.[enclosure_num] GET /redfish/v1/Chassis/HBA.[contoller_num].StorageEnclosure.[enclosure_num]/Drives/Disk.Bay.[disk_num] POST /redfish/v1/Chassis/HBA.[contoller_num].StorageEnclosure.[enclosure_num]/Drives/Disk.Bay.[disk_num]/Actions/Oem/Drive.Indicate (Expected result: Light on physical drive indication LED) POST: {"Active": "true"} or {"Active": "false"} then check "IndicatorLED" in /redfish/v1/Chassis/HBA.[contoller_num].StorageEnclosure.[enclosure_num]/Drives/Disk.Bay.[disk_num] 4. Category: Fix Description: [92311] [IPMI 3.76] Power consumption history show minimum power is 0W. [92319] [IPMI 3.76] Power consumption history show minimum power is 0W. Impact motherboard: All MBs which can detect power supplies by pmbus traffic. Validation : 1. Keep the motherboard in the Power On. 2. Wait more than 5 minutes. 3. Check the All Time Low value. 5. Category: Fix Description: [92472] [IPMI ECO] Some words are having incorrect grammar. Impact motherboard: All MBs. Validation : 1. Update the FW from the webgui. 2. Check the words in the confirm window. 6. Category: Fix Description: [92518] The word 'M' must follow after one periode. 'R.P.M' Impact motherboard: All MBs. Validation : 1. Check the "R.P.M." in the sensor reading page. 7. Category: Fix Description: [92509] Incorrect grammar shows up in the alert Window. Impact motherboard: All MBs. Validation : 1. Keep SEL empty. 2. Check the pop out window, it should be "event log entries". -------------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_376.bin version: 3.76 Date: 06-21-2018 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_03_16.xlsx 1. Category: Fix Description: [91668] IPMI Alert email function is not working properly [91669] IPMI Alert email function is not working properly Impact motherboard: All MBs. Affected functions: SMTP function. Validation : 1. Setup SMTP Server ip address on STMP web gui and the Email Address on Alerts web gui. 2. Try to trigger the event log but not send Test Alerts. 3. Check if it receive the email alert on your email box. 2. Description: Fix [91677] IPMI - Redfish X10 376 - Unable to delete Role Group in Active Directorty page. Impact motherboard: All MBs. Validation : 1. Set a group in the AD page. 2. Delete the group. -------------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_375.bin version: 3.75 Date: 06-12-2018 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_03_16.xlsx 1. Category: Fix Description: Fix "undefined" message on pop-up window before upload Broadcom 3108's ROM Impact motherboard: All MBs suitable and support BRCM 3108 AOC. Affected functions: Updating 3108's ROM Validation : 1. Go to update the 3108 FW page. 2. Upload the image. 3. You can see a confirm window. 4. Check message on that 2. Category: Fix Description: [91422] The SSM system infomation detail only shows one storage enclosure with Redfish V3.74 Impact motherboard: All MBs suitable and support BRCM 3108 AOC. Affected functions: Redfish API to list attached drives Validation : * Notice: Please confirm BMC WEB GUI will show 2 enclosures in the following submenu "Server Health" -> "Storage Monitroing" The check the dropdown list - "Select a storage category" Enclosure 0 contains - Physical Drive: 0~23 Enclosure 1 contains - Physical Drive: 24~47 : : Please confirm there are disks inside enclosure 2 or above * Go to Redfish APIs to check (assumed that you just want to verify 0-th controller) Template - https://$BMC_IP/redfish/v1/Chassis/HA-RAID.$CONTROLLER_NUMBER.StorageEnclosure.$ENCLOSURE_NUMBER APIs - 0-th controller, 0-th enclosure https://$BMC_IP/redfish/v1/Chassis/HA-RAID.0.StorageEnclosure.0 0-th controller, 1-th enclosure https://$BMC_IP/redfish/v1/Chassis/HA-RAID.0.StorageEnclosure.1 You can dive into inspect each drive info - https://$BMC_IP/redfish/v1/Chassis/HA-RAID.$CONTROLLER_NUMBER.StorageEnclosure.$ENCLOSURE_NUMBER/Drives/Disk.Bay.$DISK_NUMBER 3. Category: Fix Description: [SM1804257775] IPMI IPv6 BMC random reboot (REPRODUCIBLE). Impact motherboard: X10DRH-iT, X10SRi-F. Affected functions: Validation : 1. Please check the attached word file to setup the environment. [SM1804257775] IPMI IPv6 BMC random reboot.docx -------------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_374.bin version: 3.74 Date: 06-11-2018 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_03_16.xlsx 1. Category: Enhancement Description: [89936] Can't update 3108's FW over BMC's WEB page if there's Logical device on the card. Impact motherboard: All MBs support BRCM 3108 AOC. Affected functions: Validation : 1. Go to update the 3108 FW page. 2. Upload the image. 3. You can see a confirm window. 2. Description: Fix [91187] Redfish - Invalid Default Active Directory timeout. [91292] IPMI 3.73 Redfish Test has 1 failed item. Impact motherboard: All MBs. Validation : 1. GET /redfish/v1/Managers/1/ActiveDirectory/ 2. Check the vaule of "Timeout". 3. Description: Fix [87660] IPMI - after unmount a file, the button will not switch to upload in Floppy Disk. Impact motherboard: All MBs. Validation : 1. Mount a device in Floppy Disk page. 2. Click unmount, the unmount button will change to disalbe and the upload button will be enable. 4. Category: Features Description: Monitor Braodcom 3108 BBU status and log it on status change Impact motherboard: All MBs support BRCM 3108 AOC + 3108's BBU. Affected functions: New event will be logged Validation : * Change BBU status and check BMC WEB GUI - "Server Health - Event Log" submenu Note: Currently 3 kinds of event are supported - 1. low voltage 2. failed 3. presence 5. Category: Fix Description: [91009] [Redfish] Change JBOD mode failed Impact motherboard: All MBs support BRCM 3108 AOC Affected functions: Alter Broadcom 3108 JBOB through Redfish Validation : Follow instruction in PB:91009 to verify -------------------------------------------------------------------------------------------------------------- Filename: REDFISH_X10_373.bin version: 3.73 Date: 05-30-2018 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_03_16.xlsx 1. Category: Features Description: Support NVidia V100 PCIe 32G GPU. Impact motherboard: All GPU MBs Affected functions: Validation : 1. Insert NVidia V100 PCIe 32G GPU. 2. Category: Features Description: Support save 3108 storage controller status event. Impact motherboard: All MBs that are suitable and installed with 3108 Affected functions: Validation : Please consult with Broadcom or Arun Karulli to do error injection to make a fake controller error and check BMC event logy 3. Description: Fix [90796] [SUM Test 223]: The system cannot get sensor reading at WebUI if using IPMI REDFISH X10 371 and REDFISH X10 372. Impact motherboard: A2SDI-XC-HLN4F Validation : 1. Run the SUM test case 223. 2. Check the result. 4. Description: Fix [90964] [IPMI ECO] No CPU Throttle and Thermal Trip event log in IPMI Web when thermal trip event occur. Impact motherboard: X10QBL Validation : 1. Heat the CPU to thermal trip. 2. Check the event logs. 5. Description: Fix [90472] No NVMe tag on the IPMI WebGUI. Impact motherboard: X10OBi Validation : 1. Plug in NVMe drives onto the backplane. 2. Check the NVMe page on the WebGUI. 6. Category: Fix Description: [89568] [IPMI ECO v3.66] The help page of iKVM/HTML5 console didn't support multi-language. Impact motherboard: All MBs Affected functions: Validation : 1. Log in web page. 2. To launch an iKVM over HTML5. 3. Check the help page of iKVM/HTML5 console changes to different language accordingly. ----------------------------------------------------------------------------------------- Filename: REDFISH_X10_372.bin version: 3.72 Date: 05-15-2018 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_03_16.xlsx 1. Description: Fix [90447] [ECO IPMI3.71] Total average power of the system would shake up and down under system stress. [90404] ECO] Total average power of the system would shake up and down under system stress. [90403] ECO] [ECO REDFISH3.71] System power consumption is unstable under the given power policy limits. [90342] ECO] [ECO] Total average power of the system would shake up and down under system stress. Impact motherboard: X10DRG-Q, X10DRX, X10DRW-IT, X10DRW-E Validation : 1. Run the PTU test. 2. Lanuch SPM software to monitor power consumption. 3. Verify if the statistics is normal. 2. Description: Fix [90265] Update 3108's FW over BMC's WEB page [89936] [90153] Impact motherboard: All MBs that are suitable and installed with 3108 Affected functions: Validation : 1. First of all, you must make sure firmware version of target 3108 is already flashed 4.680.00-8290 that support OOB-I2C-way only. 2. Prepare two more 3108 FW files that are versioned as 4.650.00-6223 and 4.680.00-8290 respectively (You can download from project board, ProjectID: 8259, zipped file name: AVG3108M6B3H101.rar and AVG3108M6E3H103.rar). 3. Login BMC WEB and go to "Stoage monitoring" submenu, then go controller information's subpage and there shall be a button - "ROM Update" for this feature. 4. Please notice one thing - because OOB-I2C-way is a slow way to flash 3108, so it will take almost 30 minutes to complete whole flashing 5. Cross flashing and validation on the flashed version to see if it is changed or not. If you set current 3108 FW to be "JBOD personality". Then there won't be the "ROM Update" button shown. 3. Features Description: Features Add PUE2 mode for A2SDV-LN8F/LN10PF Impact motherboard: A2SDV-LN8F/LN10PF Affected functions: Validation : 1. Check the Fan mode setting. ------------------------------------------------------------------------------------- Filename: REDFISH_X10_371.bin version: 3.71 Date: 04-23-2018 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_03_16.xlsx 1. Description: Fix [90228] [IPMI ECO] Redfish Automation test got 9 fails. [90227] Redfish 500 returned when PATCH NetworkProtocol after factory default. Impact motherboard: All motherboards. Validation : 1. Run the redfish test. ------------------------------------------------------------------------------------- Filename: REDFISH_X10_370.bin version: 3.70 Date: 04-20-2018 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_03_16.xlsx 1. Description: Fix Remove 10G sensor on sensor reading web gui. Impact motherboard: X10SDV-xC??LN2F Affected functions: Validation : 1. Update FW and remove current SDRs. 2. Check the sensor reading web gui. 2. Description: Fix [89574] IPMI no Memory Temp and M.2 Temp sensor item. Impact motherboard: A2SDV-8C-LN8F Affected functions: Validation : 1. Check the Memory Temp sensors. 2. M.2 Temp sensor is not supported in X10 projects. 3. Description: Fix [89982] The sensor reading of AOC-STG-i4S card work abnormally. [89984] The sensor reading of AOC-STG-i4S card work abnormally. [89985] [IPMI ECO 3.69] AOC-STG-i4S sensor shows N/A. Impact motherboard: Motherboards with AOC-STG-i4S Affected functions: Validation : 1. Insert the AOC-STG-i4S card. 2. Check the AOC_NIC Temp reading. 4. Description: Fix [89885] SUM:Fail test case#215 Outband - ChangeBmcCfg and compare. Impact motherboard: X10OBi Affected functions: Validation : 1. Use the sum to issue "-c GetNvmeInfo". 2. The result should be "No NVMe controller is detected on the mother board.", if no NVMe devices are on the system. 5. Description: Fix [90161] IPMI 3.69 - Redfish AT has 9 fails. [90132] [IPMI V3.69 FW ECO] SATC test is fail. [90086] RedFish automation test fail. [90076] [IPMI ECO 3.69]Redfish Automation Tool check fail. [90045] [IPMI ECO] Redfish Automation test failed. [89983] Redfish API test fail. [89981] Redfish API test fail. [89924] [IPMI ECO 3.68] Redfish automation test fail. [89849] Redfish automation: 9 critical tests failed. [89729] [IPMI ECO] Redfish Automation test got 8 fails. [89316] [IPMI ECO] Redfish Automation test failed in get LDAP URI. Impact motherboard: All motherboards. Validation : 1. Run the redfish test. 6. Description: Fix [90146] Power supply#5 sensor reading is N/A. Impact motherboard: X10OBi Affected functions: Validation : 1. Check the PSU5 reading. ------------------------------------------------------------------------------------- Filename: REDFISH_X10_369.bin version: 3.69 Date: 04-09-2018 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_03_16.xlsx 1. Description: Fix [88929] IPMI -- Grammar error in Event Log page. Impact motherboard: All MBs Affected functions: Validation : 1. Check the string "Event Log:Max= 512,Used= 1" should be "Event Log:Max=512, Used= 1". 2. Description: Fix Duplicate AOC NIC sensor show on sensor reading web gui. Impact motherboard: AOC-STG-I4S Affected functions: Validation : 1. Check the sensor reading. It should appear one AOC NIC sensor on web gui. 3. Description: Fix [88364] Walmart system SEL did not show bad disks at very beginning. Impact motherboard: Walmart system with AOC-3108 (MB: X10DRU-i+) Affected functions: Event logs for 3108 HDD removing Validation : 1. Firstly, Install bad drives and make sure they can be shown on "Storage Monitoring" submenu. 2. AC off system, after AC on at every beginning, Check if there will be respective bad drive event assertion each AC cycle. 4. Description: Fix [88370] Walmart system IPMI could not be able to detect remove or insert HDD activity intermittently. Impact motherboard: Walmart system with AOC-3108 (MB: X10DRU-i+) Affected functions: Event logs for 3108 HDD removing Validation : 1. Make sure you have seen all connected drives shown on "Storage Monitoring" submenu. 2. Prepare a command window to keep ping BMC. And then reboot/reset BMC 3. Once the ping window is showing BMC is active. Login BMC WEB to check if there is any connected drives are shown in "Storage Monitoring" submenu. 4. Make sure at this time, there is no any dirve showing on that menu. Remove some drives from backplane. 5. Then wait a few minutes to see if there is any log about drive removing assertion showing in "Event Log" submenu. 6. Once log is showing. Put it back and check if any de-assertion is logged. 5. Description: Fix [88371] Walmart systems could not see de-assertion messages after put back removed disks. Impact motherboard: Walmart system with AOC-3108 (MB: X10DRU-i+) Affected functions: Event logs for 3108 HDD removing Validation : 1. Pull 10 HDD at same time, SEL show assertion message for each slot. 2. Reset system 3. After reset is done. Push back all 10HDD to see if any de-assertion messages 6. Category: Features Description: New Redfish features for download/upload ipmi confiuration. This function is equivalent to WEB UI like below "Maintenance" | |___"IPMI configuration" | |_ "Save IPMI Configuration" |_ "Reload IPMI Configuration" Please also refer "Redfish_API_full_list_2018_03_16.xlsx ". Impact motherboard: All MBs Affected functions: IPMI configuration Validation: Before test firmware update, you need to install the DHC (By Restlet) Chrome extension: https://chrome.google.com/webstore/detail/restlet-client-dhc/ [Download("Save" in WEB)] 1. Issue a POST on the following URL. After BMC replied done, find a "Download" icon at the right-lower corner of DHC to press URL: https://{BMC_IP}/redfish/v1/UpdateService/IPMIConfig/Actions/IPMIConfig.Download Request body: N/A 2. Then you can go to WEB UI to perform equivalent operation to check both downloaded files size and content. [Upload("Reload" in WEB)] 1. Upload configuration file by issuing the following request with POST method and expect to receive a response with "Successfully Completed Request". The content type must be "multipart/form-data" URL: https://{BMC_IP}/redfish/v1/UpdateService/IPMIConfig/Actions/IPMIConfig.Upload Request header: Content-Type = multipart/form-data Request body: Since header indicate "form-data", please add a form parameter as "File" Parameter name: ipmi_config_file Paremeter file: browse a configuration file to attach 7. Category: Features Description: Revised Redfish "Actions" for clear event log. Please also refer "Redfish_API_full_list_2018_03_16.xlsx ". Impact motherboard: All MBs Affected functions: Clear event logs Validation: Use POSTMan or DHC to issue a POST on the following new URL [Old] https://{BMC_IP}/redfish/v1/Managers/1/LogServices/Log1/Actions/LogService.Reset [New] https://{BMC_IP}/redfish/v1/Managers/1/LogServices/Log1/Actions/LogService.ClearLog 8. Description: Fix [89611] IPMI Troubleshooting function is wrong. Impact motherboard: A2SDV-LN8F/LN10PF Validation : 1. Go to Troubleshooting page. 2. Press Dump button. 3. Press the Download button. 9. Description: Fix [89172] no sensor reading for AOC-MHFI-i1C. Impact motherboard: X10DSC-TP4S Validation : 1. Insert the AOC=MHFI-i1C. 2. Power on the system and wait it to the OS. 3. Check the AOC_NIC_Temp sensor. 10. Description: Fix [89764] [IPMI ECO 3.68] Redfish Automation Tool test fail. [89729] [IPMI ECO] Redfish Automation test got 8 fails. Impact motherboard: All motherboards. Validation : 1. Run the redfish test. 11. Description: Fix [89807] [ECO IPMI3.68]Run smcipmitool pminfo command failed. Impact motherboard: X10SRG-F Validation : 1. Use the SMCIPMITool pminfo command. 2. Check the result. ------------------------------------------------------------------------------------- Filename: REDFISH_X10_368.bin version: 3.68 Date: 03-20-2018 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_02_22.xlsx 1. Category: New feature Description: Adaptive temperature threshold in SDR for drives connected to 3108 Impact motherboard: All MBs installed with 3108 Affected functions: Validation : Threshold values in SDR for drives temperature is adaptive by their types 1. If all HDD(rotational hard drive), then threshold is (UC:55, UNR:60) 2. If all SSD, then threshold is (UC:70, UNR:75) 3. If mix, then threshold is the same as HDD(rotational hard drive) 2. Category: New feature Description: Enable AC Power On Event log Impact motherboard: All MBs Affected functions: Validation : 1. AC power off the system after new BMC FW is updated. 2. AC power on. 3. Check that AC Power On event log should exist. 3. Description: Fix AC Power On Event log reported when BMC do coldreboot. Impact motherboard: All MBs Affected functions: Validation : 1. Disable AC Power On Event Log function (IPMI Web). 2. Turn off AC powers. 3. Turn on AC powers. 4. Enable AC Power On Event Log function (IPMI Web). 5. Unit Reset (IPMI Web). 6. Check that AC Power On event log should not exist. 4. Category: New feature Description: Update 3108's FW over BMC's WEB page Impact motherboard: All MBs suitable for 3108 and also install with 3108 Affected functions: Validation : 1. First of all, you must make sure firmware version of target 3108 is already flashed 4.680.00-8290 that support I2C-way only. 2. Prepare two more 3108 FW files that are versioned as 4.650.00-6223 and 4.680.00-8290 respectively (You can download from project board, ProjectID: 8259, zipped file name: AVG3108M6B3H101.rar and AVG3108M6E3H103.rar). 3. Login BMC WEB and go to "Stoage monitoring" submenu, then go controller information's subpage and there shall be a button - "ROM Update" for this feature. 4. Please notice one thing - because I2C-way is a slow way to flash 3108, so it will take almost 30 minutes to complete whole flashing 5. Cross flashing and validation on the flashed version to see if it is changed or not. 5. Category: New feature Description: Enable/disable 3108's JBOD mode over - 1. BMC's WEB page 2. Redfish API: "/redfish/v1/Systems/1/Storage/HA-RAID" Impact motherboard: All MBs suitable for 3108 and also install with 3108 Affected functions: Validation : 1. [WEB] Login BMC WEB and go to "Stoage monitoring" submenu, then go controller information's subpage and there shall be a information about "JBOD Mode" with a drop-down menu for Enable/Disable. 2. [BIOS] Current value of that drop-down menu means current setting of JBOD mode. So pick up different value to "Save" and reset system to go to 3108's BIOS configuration menu(during BIOS POST stage and after 3108 being 100% initialized, press "Ctrl + R" to enter 3108's BIOS) to check if value is changed or not. After checking, please let go this BIOS menu to unlock 3108 so as to let it free run again. 3. [Redfish] Go to browse Redfish API - "/redfish/v1/Systems/1/Storage/HA-RAID" and check the property, "JBODMode", whithin "StorageControllers". Check if this value matches what you see in step 2. 4. [Redfish] Finally to perform the "Actions" - "HARAIDControllers.Save" to change jbod mode again. Operation details as below: URL: https://${BMC_IP}/redfish/v1/Systems/1/Storage/HA-RAID/Actions/Oem/HARAIDController.Save HTTP method: PATCH Example Body: { "ControllerId": 0, "BIOSBootMode": "PauseOnError", "JBODMode": "Enable" } After successful execution of this PATCH, go to step 2[BIOS] to check again and of course you shall check again value in BMC WEB, too. 4. Description: New feature CPU VRM sensors are missing. Impact motherboard: X10DRH-I, X10DRH-C Affected functions: Validation : 1. Check the sensor reading. --------------------------------------------------------------------------------------------- Filename: REDFISH_X10_367.bin version: 3.67 Date: 02-24-2018 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2018_02_22.xlsx 1. Category: Fix Description: During system is booting and after Broadcom 3108 storage controller is initialized, when user removes those pre-installed HDDs(connect to storage backplane to 3108), BMC won't log events Impact motherboard: All MBs with Broadcom 3108 storage controller being installed Affected functions: Log HDD absent events Validation : 1. Prepare a MB and install an AOC-H3108L-H8iR then and storage backplane, then connect some HDDs onto. 2. Power on system, and after 3108's option ROM is loaded at BIOS stage, then check BMC can show "Storage monitoring" submenu. 3. Once its attached HDDs also shown on that submenu, got to remove some HDDs and wait a moment(maybe 15 seconds) to check if BMC log these event or not. 2. Category: New feature Description: Add redfish memory information feature. Infected motherboard: All MBs Affected functions: Validation : 1. check mothboard memory information from redfish(postman). ------------------------------------------------------------------------------------------- Filename: REDFISH_X10_366.bin version: 3.66 Date: 01-30-2018 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r37 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2017_11_13.xlsx 1. Category: Features Description: Suppor redfish firmware inventory (bios/bmc update). Impact motherboard: All MBs which support BIOS update. Affected functions: Validation : Before testing the IPMI configuration download operation, you need to install the DHC (By Restlet) Chrome extension: https://chrome.google.com/webstore/detail/restlet-client-dhc/ BIOS update 1. Enter BIOS update mode by issuing the following request with POST method and expect to receive a response with ??Successfully Completed Request?? https:///redfish/v1/UpdateService/FirmwareInventory/BMC/Actions/Oem/FirmwareInventory.UploadBMC 2. Upload BIOS image by issuing the following request with POST method and expect to receive a response with ??Successfully Completed Request?? The content type must be ??multipart/form-data?? https:///redfish/v1/UpdateService/FirmwareInventory/BIOS/Actions/Oem/FirmwareInventory.UploadBIOS 3. Start to update BIOS by issung the following request with POST method and expect to receive a response with ??Successfully Completed Request?? 3 parameters, PreserveME, PreserveNVRAM and PreserveSMBIOS are required in the request body. https:///redfish/v1/UpdateService/FirmwareInventory/BIOS/Actions/Oem/FirmwareInventory.UpdateBIOS 4. Check the BIOS update status by issuing the following request with GET method and expect to receive a response with BIOS information. https:///redfish/v1/UpdateService/FirmwareInventory/BIOS/ BMC update 1. Enter BMC firmware update mode by issuing the following request with POST method and expect to receive a response with ??Successfully Completed Request?? https:///redfish/v1/UpdateService/FirmwareInventory/BMC/Actions/Oem/FirmwareInventory.EnterBMCUpdateMode 2. Upload BMC image by issuing the following request with POST method and expect to receive a response with ??Successfully Completed Request?? The content type must be ??multipart/form-data?? https:///redfish/v1/UpdateService/FirmwareInventory/BMC/Actions/Oem/FirmwareInventory.UploadBMC 3. Start to update BMC by issung the following request with POST method and expect to receive a response with ??Successfully Completed Request?? 3 parameters, PreserveCfg, PreserveSdr and PreserveSsl are required in the request body. https:///redfish/v1/UpdateService/FirmwareInventory/BMC/Actions/Oem/FirmwareInventory.UpdateBMC 4. Check the BMC firmware information by issuing the following request with GET method and expect to receive a response with BMC information. https:///redfish/v1/UpdateService/FirmwareInventory/BMC/ 2. Category: Features Description: Support new SIOM AOC-MH25G-b2s2G. Impact motherboard: All MBs with SIOM. Affected functions: Validation : 1. Insert the AOC-MH25G-b2s2G. 2. Power cycle the system. 3. Check the AOC NIC Temp reading. 3. Category: Features Description: Support A2SDV-LN10PF/LN8F Impact motherboard: A2SDV-LN10PF/LN8F Affected functions: Validation : 1. For bring up. 4. Category: Fix Description: [87913] System Temp shows incorrect temperature when doing Redfish manual Impact motherboard: X10QRH+-P Affected functions: Validation : 1. check System Temp in https://$IP/redfish/v1/Chassis/1/Thermal 5. Category: Fix Description: [87910] Redfish Automation failed [87581] Redfish Automation Test Fail 8 items [87576] Redfish Automation failed 3 items [87472] Redfish 4 test items failed Impact motherboard: X10QRH+-P, X10DRT, X10DRT-PS, X10DRi Affected functions: Validation : 1.Please run Redfish Automation Tool again. 6. Category: Fix Description: [87663] IPMI --- in Trouble Shooting page, the title should be Troubleshooting. Impact motherboard: X10DRU-i Affected functions: Validation : 1.Check Web page of Troubleshooting. 7. Category: Fix Description: [87662] IPMI --- IPMI updated message need to fix. Impact motherboard: X10DRU-i Affected functions: Validation : 1.Update BMC fw and check message. 8. Category: Fix Description: [87657] IPMI --- CD-ROM image page's pop-up window has syntax problem. Impact motherboard: X10DRU-i Affected functions: Validation : 1. Set all setting in CD-ROM correctly. 2. Press "Save" button. 3. It should not pop out windows. 9. Category: Workaround Description: [87706] IPMI Web GUI shows an extra line for MAC address Impact motherboard: X10DRR-PS with AOC-MH25G-B2S2G Affected functions: Validation : 1. Check the system information page. 2. There is no "00:00:00:00:00:00" address. 10. Category: Fix Description: [87714] [IPMI ECO] The help page of iKVM/HTML5 console didn't support multi-language. Impact motherboard: X10DRW-N Affected functions: Validation : 1. Open iKVM/HTML5. 2. Change the language. 3. Check the "Help" word is changed or not. 4. The help page content will keep English until received PM's 299 form. ------------------------------------------------------------------------------------------- Filename: REDFISH_X10_365.bin version: 3.65 Date: 12-15-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2017_07_11.xlsx 1. Category: Fix Description: [86447] A2SD1 IPMI sensor reading for PVCC_REF is incorrect. Impact motherboard: A2SD1 Affected functions: Validation : 1. Check the sensors. 2. Category: New feature. Description: Support Nivida P4 GPU on X10DRX. Impact motherboard: X10DRX Affected functions: Validation : 1. Check GPU sensors. ------------------------------------------------------------------------------------------- Filename: REDFISH_X10_364.bin version: 3.64 Date: 12-14-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2017_07_11.xlsx 1. Category: Fix Description: [86755] [IPMI ECO 3.63] SUM 2.0.1 test fail. [86722] [IPMI ECO 3.63] SUM 2.0.1 Test fail. [86706] [IPMI ECO] sum test fail. [86670] SUM test fails. Impact motherboard: All MBs. Affected functions: Validation : 1. Run TC215 of SMSTC. 2. Category: Fix Description: [86764] The default alert mail sender name is incorrect. Impact motherboard: A2SDV. Affected functions: Validation : 1. Send an alert mail without default sender name. 2. Check the sender: BMCXXXXXXXXX@A2SDV.com. ------------------------------------------------------------------------------------------- Filename: REDFISH_X10_363.bin version: 3.63 Date: 12-04-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2017_07_11.xlsx 1. Category: Feature Description: Support NVIDIA V100. Impact motherboard: MBs used at GPU systems. Affected functions: Validation : 1. Installed NVIDIA V100. 2. Check the sensor page. 2. Category: Fix Description: [84605] [BIOS ECO] No UECC event log in BIOS and IPMI SEL with X10DRWN7.908 BIOS. Impact motherboard: X10DRW-NT Affected functions: Validation : 1. Generate the UECC event log. 2. Check the Webgui Event Log page. 3. Category: Fix (Workaround) Description: [86046] IPMI wont detect NVMe hot plugged if OS is up first without any NVMe installed. Impact motherboard: X10DRU Affected functions: Validation : 1. AC power on the sytem. 2. Check NVMeSSD web gui if exists. 4. Category: Fix Description: [86156] The help information does not match "LAN Mode Control" page in the IPMIWeb GUI. Impact motherboard: A2SDV Affected functions: Validation : 1. Check the help page of LAN Mode Control. 5. Category: Enhancement Description: Improvement of multi-language content on the iKVM/HTML5 option menu and submenu. Impact motherboard: All MBs Affected functions: Validation : 1. Log in web page. 2. To launch an iKVM over HTML5. 3. Check the option menu and submenu do not have missing contents. 6. Category: Enhancement Description: Disable MCTP support on Broadcom 3108 FW. Now it only supports I2C protocol. Impact motherboard: All MBs with 3108 storage controller Affected functions: Validation : 1. Please use LSI card FW which supports I2C protocol(4.680.00-8290). 2. Check if AOC SAS temp sensor exists. --------------------------------------------------------------------------- Filename: REDFISH_X10_362.bin version: 3.62 Date: 10-26-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2017_07_11.xlsx 1. Category: Fix Description: [83507] Change IPMI LAN mode fail by SMSTC. Impact motherboard: A2SDV Affected functions: Validation : 1. Run SMSTC test. 2. Category: Fix Description: [83231] A2SDV-NE008 is not support IPMI Dedicate LAN and should be remove Dedicate LAN item in IPMI Network page. Impact motherboard: A2SDV Affected functions: Validation : 1. Check Network page. 2. It should only have share NIC. 3. Category: Fix Description: [70838][AOC-MHFI-i1C] No 100G Temperature Sensor Reading in IPMI Web. Impact motherboard: X10DRT-PS Affected functions: Validation : 1. Insert AOC-MHFI-i1C into the system. 2. Reboot the system and check the AOC_NIC_Temp. 4. Category: Fix Description: [84276] SUM "Test_case_215 Outband - ChangeBmcCfg and compare" fail. Impact motherboard: All Affected functions: Validation : 1. Run #215 by using the latest SUM version. 5. Category: Fix Description: [84774] P100 IPMI Temperature Threshold Incorrect IPMI; GPU. Impact motherboard: X10DRG-O Affected functions: Validation : 1. Please unselect the preserved SDRs during BMC FW is updated. 6. Category: Fix Description: [84935] IPMI - Cannot disable LDAP Authentication immediately after Enable it. Impact motherboard: All Affected functions: Validation : 1. Enable the LDAP in the LDAP page. 2. Disable the LDAP in the LDAP page. 3. It should not pop out warning message. --------------------------------------------------------------------------- Filename: REDFISH_X10_361.bin version: 3.61 Date: 08-21-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2017_07_11.xlsx 1. Category: Fix Description: [82590] FAN PWM check fail. Impact motherboard: A2SDV Affected functions: Validation : 1. Check memory sensor reading. 2. Category: Fix Description: [Redfish] Incorrect product serial number Impact motherboard: All Affected functions: Validation : 1. Write product serial number into FRU with more that 15 characters through ipmicfg. 2. Check the product serial number from web/redfish, it should be right. 3. Category: Fix Description: [83230] VLAN function is fail. Impact motherboard: A2SDV Affected functions: Validation : 1. Set the VLAN function. ------------------------------------------------------------------------------- Filename: REDFISH_X10_360.bin version: 3.60 Date: 07-28-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2017_07_11.xlsx 1. Category: Enhancement Description: Support IERR event log. Impact motherboard: X10SRW-F Affected functions: Validation : 1. Trigger Cat Error function. 2. Check the event log. 2. Category: Fix (HW Workaround) Description: [81992] IPMI temperature check is failing. Impact motherboard: A2SDV Affected functions: Validation : 1. Check the System Temp value. 3. Category: Fix Description: [80990] [SUM v1.7.0] Run Full Mode is FAIL Impact motherboard: X10SL7 Affected functions: Validation : 1. Run SUM test. 4. Category: Fix Description: [82533] There's no CPU Vcore and DIMM temperature sensor reading on IPMI Web. Impact motherboard: A2SDV Affected functions: Validation : 1. It should have Vcpu sensor. ------------------------------------------------------------------------------- Filename: REDFISH_X10_359.bin version: 3.59 Date: 06-30-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2017_06_07.xlsx 1. Category: Fix Description: [81049] [BIOS A2SDICH7.518 ECO] LAN MAC address somtimes will be cleared during run SUM test Impact motherboard: A2SDI Affected functions: Validation : 1. Run SUM test and check LAN MAC address. 2. Category: Fix Description: [80490] Change [BIOS ECO 1.2a] VBAT / PS status is displayed incorrectly in IPMI sensor readings Impact motherboard: A1SA2 Affected functions: Validation : 1. Check VBAT sensor reading. ------------------------------------------------------------------------------- Filename: REDFISH_X10_358.bin version: 3.58 Date: 06-09-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2017_06_07.xlsx 1. Category: Enhancement Description: Change the license requirement of web GUI syslog from DCMS to OOB Impact motherboard: All Affected functions: Validation : 1. web --> Configuration --> Syslog, should not be available for use 2. enable OOB license 3. web --> Configuration --> Syslog, should be available for use 4. diable OOB license and enable DCMS license 5. web --> Configuration --> Syslog, should be available for use ------------------------------------------------------------------------------- Filename: REDFISH_X10_357.bin version: 3.57 Date: 06-07-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2017_06_07.xlsx 1. Category: Feature Description: [Redfish] Patch an empty json payload "{}" to those APIs support PATCH, a 204 http status code will be responded, while to those not support PATCH, a 405 http status code will be responded. Impact motherboard: All MBs Affected functions: Redfish PATCH for different APIs Validation : 1. Please refer the file "Redfish_API_full_list_2017_06_07.xlsx" and patch an empty json payload, "{}", to each API to check http status code. 2. Category: Feature Description: [Redfish] Nest ICANN domain in "Oem" part if there is data to show Impact motherboard: All MBs Affected functions: Redfish "Oem" parts Validation : 1. Check Redfish APIs response with "Oem" key, when there is data inside, a ICANN domain name (e.g. Supermicro) is nested as a middle json payload container 3. Category: Fixes Description: Secondary NTP server becomes empty after restore to default. Impact motherboard: All MBs Affected functions: NTP Validation : 1. Restore BMC to default 2. Both Primary and Secondary NTP server in Date and Time page should not be empty. 4. Category: Enhancement Description: Redfish API rename: /redfish/v1/UpdateService/SSL -> /redfish/v1/UpdateService/SSLCert /redfish/v1/UpdateService/SSL/Actions/SSL.Upload -> /redfish/v1/UpdateService/SSLCert/Actions/SSLCert.Upload Impact motherboard: All Affected functions: Validation : Check Redfish APIs' URI of SSL related 5. Category: Fixes Description: [80837] IPMI FW 3.56: Unable to handle SMTP Port Number correctly Impact motherboard: All MBs Affected functions: SMTP Validation : 1. Go to SMTP tab in WEB 2. Input floating number and string in "SMTP port" 6. Category: Fixes Description: [80838] IPMI FW 3.56: Unexpected alert when changing date and time settings Impact motherboard: All MBs Affected functions: NTP Validation : 1. Go to Date and Time 2. Disable NTP 3. Change current month to a future month (i.e. from June change to July) 4. Click Save 7. Category: Fixes Description: [80839] IPMI FW 3.56: Operator level access can reset iKVM Impact motherboard: All MBs Affected functions: Reset iKVM over WEB Validation : 1. Login web page with operator privilege level 2. Go to IKVM Reset Tab under Maintenance to check if "Reset" button is disabled ------------------------------------------------------------------------------- Filename: REDFISH_X10_356.bin version: 3.56 Date: 05-24-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2017_04_26.xlsx 1. Category: Enhancement Description: Reduce the action to reset OOB interface of Broadcom 3108 RAID controller Impact motherboard: All MBs with AOC-3108 or on board 3108 chip Affected functions: All RAID functions related to 3108 Validation : 1. Install a AOC-3108 on the MB(or a MB with on board 3108) 2. Update 3108 ROM by this reposity: \\rdlab-fs\driver\LSI\SAS\3108\Current_Test\MR6.13_GCA_011717\FW 3. Verify all the functions related to 3108 to check if there is error happens 4. Finally run cburn AC ON/OFF test as long as you can to check if there is HDD lost in OS environment 2. Category: Fixes Description: System installed with 3108 AOC then run cburn ON/OFF test: 1. Cause system hang at POST stage (and IERR happens) 2. Some affiliated HDDs within 3108 will be lost(disk drop) Impact motherboard: All motherboard which support LSI 3108 card. MCTP protocol are needed to be supported by the bios. Affected functions: Validation : 1. Insert LSI 3108 card 2. Run cburn ON/OFF test, it will automatically check: 2-1. System hang at POST stage (and IERR happens) 2-2. The drives lost or not (If you don't know how to run this verification, please contact Joe Chung(in US)) 3. Category: Enhancement Description: Fix security vulnerability (NTP mode 6 scanner) Impact motherboard: All Affected functions: Validation : 1. Please do factory default. 2. Enable NTP in Date and Time page. 3. Run Nessus. NTP mode 6 scanner issue should not be in test report. ------------------------------------------------------------------------------- Filename: REDFISH_X10_355.bin version: 3.55 Date: 05-23-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2017_04_26.xlsx 1. Category: Feature Description: Crash Dump: filter out false alarm CATERR. Impact motherboard: All Affected functions: Validation : 1. Enter web GUI, Micellaneous --> Trouble Shooting 2. Click 'Dump' button. 3. Check SEL, there shouldn't display 'IERR' log 4. ipmitool -H $YOUR_IP -U ADMIN -P ADMIN raw 0x3E 0x21 5. Check SEL, there shouldn't display 'IERR' log 2. Category: Fixes Description: [79941] [ RedFish ] Not enough information for POST Storage.CreateVolume. Impact motherboard: All motherboards Affected functions: Validation : 1. Check the content by https://$YOUR_IP/redfish/v1/Systems/1/Storage/HA-RAID/Actions/Oem/Storage.CreateVolume 3. Category: Fixes Description: [79710] IPMI unable to handle uppercase IPv6 Address Impact motherboard: All Affected functions: Validation : 1. Go to Configuration -> Network, IPv6 Settings: 2. Enter "0::FFFF:AC3F:2009/64" (be sure is in Uppercase) in IPv6 Address 3. Click "Save" 4. After saving, Click "Refresh" (inside IPMI, not the browser) 5. Select "0:0:0:0:0:ffff:ac3f:2009/64" in the address list 6. Select "Delete IP" 7. Click "Save" and then "Refresh", the IP should not be in the address list. 4. Category: Fixes Description: [80231] POST action on /redfish/v1/UpdateService/SSL should not be allowed Impact motherboard: All Affected functions: Validation : 1. POST a request on URI which doesn't support POST then check if BMC will reply error code to stop this illegal access 5. Category: Fixes Description: [80107] Duplicate MAC address shown in IPMI Web GUI. Impact motherboard: X10DRT-PS Affected functions: Validation : 1. Login in the BMC web gui and check the system mac address. 6. Category: Fixes Description: [79983] IPMI SEL DIMM location is not meet MB silkscreen. Impact motherboard: X10SLM-F Affected functions: Validation : 1. Lanuch the memory ecc err command. 2. Check the wording on the sel log web gui. 7. Category: Fixes Description: [CRM SM1705014348] Supermicro Case#SM1705014348 Impact motherboard: SYS-6028UX-TR4 Affected functions: Validation : 1.Enter SMASH-CLP shell by operator privilege. 2.Resst the host by "reset system1/pwrmgtsvc1". 3.The action can be executed. ------------------------------------------------------------------------------- Filename: REDFISH_X10_354.bin version: 3.54 Date: 05-08-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2017_04_26.xlsx 1. Category: Fixes Description: [79799] SUM Test failed [79797] SUM Test failed [79792] [Redfish v3.53 firmware ECO] Failed to run SUM ECO tests Impact motherboard: All Affected functions: Validation : 1. Run SUM tests. 2. Category: Fixes Description: [79587] BIOS/IPMI SEL DIMM location is not meet MB silkscreen. Impact motherboard: All motherboards with one CPU is supported. Affected functions: Validation : 1. Lanuch bios memory err command. (Failing DIMM: DIMM location). 2. Check the wording. ------------------------------------------------------------------------------- Filename: REDFISH_X10_353.bin version: 3.53 Date: 05-03-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r35 Redfish/iKVM version : 1.0.1 Redfish API : Redfish_API_full_list_2017_04_26.xlsx 1. Category: Feature Description: Redfish support new APIs Impact motherboard: all Affected functions: Validation : 1. Valid on DCMS license only 2. Check out the following APIs (including "actions"): /redfish/v1/Chassis/HA-RAID.[contoller_num].StorageEnclosure.[enclosure_num]/Drives/Disk.Bay.[disk_num]/Actions/Oem/Drive.Indicate (For 3108, Light on respective physical drive LED) /redfish/v1/Systems/1/Storage/HA-RAID/HA-RAID.[contoller_num].Volumes/[volume_num]/Actions/Oem/Volume.Indicate (For 3108, Light on respective logical drive LED) /redfish/v1/Systems/1/Storage/HA-RAID/HA-RAID.[contoller_num].Volumes/[volume_num]/Actions/Oem/Volume.Delete (For 3108, Delete specific logical drive) /redfish/v1/Systems/1/Storage/HA-RAID/Actions/Oem/Storage.CreateVolume (For 3108, Create logical drive against specific RAID controller) /redfish/v1/Systems/1/Storage/HA-RAID/Actions/Oem/Storage.ClearVolumes (For 3108, Clear all logical dirves against specific RAID controller) /redfish/v1/Systems/1/Storage/HA-RAID/Actions/Oem/HARAIDController.Save (For 3108, Save specific RAID controller's BIOS boot mode) /redfish/v1/Managers/1/VM1/CfgCD (Configure ISO image settings: host, path, username and password) /redfish/v1/Managers/1/VM1/CfgCD/Actions/IsoConfig.Mount (Do mount ISO image) /redfish/v1/Managers/1/VM1/CfgCD/Actions/IsoConfig.UnMount (Do unmount ISO image) /redfish/v1/Managers/1/IKVM (get a URL link to launch an iKVM over HTML5) /redfish/v1/UpdateService/SSL (view current SSL certification information) /redfish/v1/UpdateService/SSL/Actions/SSL.Upload (used to upload new SSL certification file) 2. Category: Fixes Description: [79065] Failed to eject NVMeSSD Impact motherboard: X10SRM-F Affected functions: Validation : 1. Insert NVMe drives. 2. Eject NVMe drive on NVMe web gui. 3. Pull out the NVMe drive. 4. Check the ejected event log on sel web gui. 5. Plug in the drive. 6. Insert the NVMe drive. 7. Check the inserted event log on sel web gui. 3. Category: Fixes Description: [79016] VDIMM/PVNN/PVCC_REF sensor readings are in "NC" state. Impact motherboard: A2SDI-H-TP4F Affected functions: Validation : 1. Update and remove old SDR. 2. Check the threshold of VDIMM/PVNN/PVCC_REF sensor. 4. Category: Fixes Description: When you select French keyboard layout, there some digits keys don't work. Impact motherboard: all Affected functions: Validation : 1. launch java remote console. 2. select French keyboard layout in option menu 3. test all keys 5. Category: Fixes Description: System hang during POST with IERR errors when using 3108 AOC Impact motherboard: all motherboard which support LSI 3108 card. MCTP protocol are needed to be supported by the bios. Affected functions: Validation : 1. Insert LSI 3108 card. 2. Do system DC on/off test over 12 hours. 3. Check if the system hang. 6. Category: New Feature Description: Download caterr dump data for TS team to analyza Impact motherboard: All Affected functions: Validation : 1. Lanuch IERR function. 2. Try to download caterr dump data by smcipmitool. SMCIPMITOOL.exe 10.133.176.184 ADMIN ADMIN ipmi oem gerneralfiledownload 19 c:\caterr.raw. 3. Consult with TS team to process this raw data. 7. Category: Fixed Description: Work in with Broadcom's suggestion, 3108 controller will abandon the way on MCTP-over-PCIe Impact motherboard: All with 3108 controller Affected functions: Validation : 1. Please contact with Chassis team's Farid or Manju to get respective I2C-versioned 3108's ROM and flash your testing 3108 with this ROM. Then check if it is workable. 2. Please update 3108's ROM with the MCTP-over-PCIe version, basically, BMC will not recognize and of course won't managet it. ------------------------------------------------------------------------------- Filename: REDFISH_X10_352.bin version: 3.52 Date: 03-31-2017 Support Motherboard: All X10 MBs U-Boot build time : 2008.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 1. Category: Fixes Description: [78034] [SUM 1.7.0(2017/02/02)] Test "UpdateRaidController" was failed.(ExitCode: 38) Impact motherboard: X10DRG-Q Affected functions: Validation : 1. Run SUM UpdateRaidController command to update 3108 rom. 2. Check the result. 2. Category: Enhancement Description: Upgrade NTP package to 4.2.8p9 for security issue CVE-2016-7434, Ref Impact motherboard: All Affected functions: Validation : 1.Enable NTP in Date and Time page. 3. Category: Fixes Description: [72537] No CPU Throttle event in IPMI Event Log page [72531] No "CPU Overheat", "thermal Throttling" de-assertion event in IPMI Event Log page Impact motherboard: A2SDI Affected functions: Validation : 1. Heat CPU until thermal trip. 2. Check SEL, there should be thermal throttling event. 4. Category: Fixes Description: [78419] IPMI Web Session value didn't load default after IPMI Load Factory Default Impact motherboard: all Affected functions: Validation : 1. Change Web session time and save. 2. Do factory default commands. 3. Re-login and check the value. 5. Category: Fixes Description: [77464] CPU Overheat LED function can't work Impact motherboard: A2SDI Affected functions: Validation : 1. Heat CPU until throttling. 2. Check overheat led 6. Category: Fixes Description: [78412] The fan RPM fluctuates for the NIC devices Impact motherboard: X10DRU-I+ Affected functions: Validation : 1. Install AOC ards. 2. Try check the duty cycle of MB_NIC Temp and AOC_NIC Temp if they are the same. 7. Category: Enhancements Description: CVE-2003-0001 Impact motherboard: all Affected functions: Validation : 1. download etherleak.pl for issue verification and execute the perl script under linux. 2. issue: sudo ./etherleak.pl -i eth1 -f host\ 10.138.160.118 3. If no CVE-2003-0001 issue, the script will keep waiting and display nothing. 8. Category: New Feature Description: Redfish support storage APIs Impact motherboard: Motherboards which can support Broadcom 3108 reading. Motherboards which can support NVMe web page detections. Affected functions: Validation : 1. Valid on DCMS license only 2. Check out the following storage APIs: /redfish/v1/Systems/1/Storage /redfish/v1/Systems/1/Storage/HA-RAID (For Broadcom 3108) /redfish/v1/Systems/1/Storage/HA-RAID/HA-RAID.[contoller_num].Volumes (For Broadcom 3108) /redfish/v1/Systems/1/Storage/HA-RAID/HA-RAID.[contoller_num].Volumes/[volume_num] (For Broadcom 3108) /redfish/v1/Systems/1/Storage/RAIDIntegrated (For RSTe, Must have TAS running) /redfish/v1/Systems/1/Storage/RAIDIntegrated/Volumes (For RSTe, Must have TAS running) /redfish/v1/Systems/1/Storage/RAIDIntegrated/Volumes/[volume_num] (For RSTe, Must have TAS running) /redfish/v1/Systems/1/Storage/SATAEmbedded (For PCH SATA, Must have TAS running) /redfish/v1/Systems/1/Storage/SATAEmbedded/Volumes (For PCH SATA, Must have TAS running) /redfish/v1/Systems/1/Storage/SATAEmbedded/Volumes/[volume_num] (For PCH SATA, Must have TAS running) /redfish/v1/Chassis/HA-RAID.[contoller_num].StorageEnclosure.[enclosure_num] (For Broadcom 3108) /redfish/v1/Chassis/HA-RAID.[contoller_num].StorageEnclosure.[enclosure_num]/Drives/Disk.Bay.[disk_num] (For Broadcom 3108) /redfish/v1/Chassis/StorageBackplane (For PCH SATA or RSTe, Must have TAS running) /redfish/v1/Chassis/StorageBackplane/Drives/Disk.Bay.[disk_num] (For PCH SATA or RSTe, Must have TAS running) /redfish/v1/Chassis/NVMeSSD.[pcie_controller_num].Group.[group_num].StorageBackplane.[pcie_controller_num] (For NVMe) /redfish/v1/Chassis/NVMeSSD.[pcie_controller_num].Group.[group_num].StorageBackplane.[pcie_controller_num]/Drives/Disk.Bay.[disk_num] (For NVMe) ------------------------------------------------------------------------------- Filename: REDFISH_X10_351.bin version: 3.51 Date: 02-15-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: [74090] SUM test case 409 fail. Impact motherboard: X10DRH-CLN4 Affected functions: Validation : 1. Run SMSTC ECO test. 2. Check the result. 2. Category: Fix Description: [77407] FAN3 and FANA header FAN fail function can't work [76836] IPMI function can't work Impact motherboard: A2SDI-H-LN4F Affected functions: Validation : 1. Check Fan sensor in sensor page. 3. Category: Fix Description: [76902] eburn stress fail. [76854] IPMI FW will be "unknown" after serveral times reboot [76848] JD1 function can't work [76846] JWD1 jump can't work Impact motherboard: A2SDI-H-LN4F Affected functions: Validation : 1. Check BMC status in BIOS ------------------------------------------------------------------------------- Filename: REDFISH_X10_350.bin version: 3.50 Date: 01-20-2017 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 1. Category: New Feature Description: Support new motherboard: A2SDI-H-LN4F Impact motherboard: A2SDI-H-LN4F Affected functions: Validation : 1. Board ID: 0x0910. 2. Category: Fix Description: [75877] Missing "standard mode" in FSC Impact motherboard: X10DRC-LN4+ Affected functions: Validation : 1.Please do factory default and check default fan mode. ------------------------------------------------------------------------------- Filename: REDFISH_X10_349.bin version: 3.49 Date: 12-15-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r33 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: [75875] BIOS diag tool cannot save logs. Impact motherboard: All except Denlow platform. Affected functions: Validation : 1. system boot into UEFI mode2. run BIOS diag tool. 2. run BIOS diag tool. 2. Category: New feature Description: [75759] Micron 7100 NVMe) IPMI (fw: 03.48) is not displaying NVMe temperature correctly. [75564] Seagate XF1440 1.92TB NVMe doesn't display temperature in IPMI WebGUI. Impact motherboard: Motherboards which support NVMe functions. Affected functions: Validation : 1. Install the Seagate/Seagate NVMe Drives. 2. Check the temp on NVMe SSD page. 3. Category: New feature Description: [75460] IPv6: Sensor data can't be retrieved by iReasoning MIB Browser (SNMP). Impact motherboard: All Affected functions: Validation : 1. Lanuch iReasoning MIB Browser. 2. Retrieve sensor data. 4. Category: Fix Description: [47976] [ SUM 1.7.0 ] SUM test fail. Impact motherboard: All Affected functions: Validation : 1. Run test case #215 5. Category: Fix Description: [MCTP] When using IPMI storage monitoring feature to crate Raid volume with "No Read Ahead" settting, MSM still showing Raid volume setting as "Always Read Aheard" Impact motherboard: Those installed with LSI3108 controller Affected functions: LSI3108 create RAID via WEB UI Validation : Create RAID drives via "Storage monitoring" on LSI3108 and open MSM to check 6. Category: New feature Description: NVMe event log when plugged in or pulled out Impact motherboard: For motherboards which can support NVMe drive detections. Affected functions: Validation : 1.Plug NVMe drives and power on the machine. 2.Press Eject/Insert function on NVMe web gui and wait for success message is received. 3.Check event log. ------------------------------------------------------------------------------- Filename: REDFISH_X10_348.bin version: 3.48 Date: 11-xx-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r31 Redfish/iKVM version : 1.0.1 1. Category: New feature Description: Support SEL Almost Full log (75%) and SEL Full log (99%). Impact motherboard: All Affected functions: Validation : 1. Generate a lot of logs. 2. Check the "Event Logging Disabled" SELs are recorded. 2. Category: Fix Description: [75082] [BIOS ECO v2.0a]SUM test fail. [75025] [SUM 1.6.1]: Unable to change BMC configuration file by OutBand/InBand command. Impact motherboard: All Affected functions: Validation : 1. Run the SUM Test: TC_214, TC_215, and TC_313. 2. They should be all pass. 3. Category: Fix Description: [75041] Redfish automation - 9 fails. Impact motherboard: X10QBi Affected functions: Validation : 1. Run the Redfish automation test. 2. They should be all pass. 4. Category: New feature Description: Support Pascal P4 GPU Impact motherboard: All Affected functions: Validation : 1. Install Pascal P4 GPU. 2. Check the GPU temperature. 5. Category: New feature Description: Support save BIOS diag file into BMC by OOB command. Impact motherboard: All except Denlow platform. Affected functions: Validation : 1. run BIOS diag tool. 6. Category: Fix Description: [74689] (Micron PCI9100 NVMe) IPMI (fw:03.47) is not displaying NVMe temperature correctly. Impact motherboard: X10DRU-i+ Affected functions: Validation : 1. Install the Micron PCI9100 NVMe. 2. Check PCIe SSD page. 7. Category: Fix Description: Standard mode is missing on X10DRC Impact motherboard: X10DRC Affected functions: Validation : 1. Check the fan mode ------------------------------------------------------------------------------- Filename: REDFISH_X10_347.bin version: 3.47 Date: 11-04-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r31 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: [73627] AOC-2UR68-m2TS No temperature sensor reading on X10DRU-i+ Impact motherboard: X10DRU-I+ Affected functions: Validation : 1. Check NIC temp if exists 2. Insert LSI3108, AOC card or GPU and check the related temps if exists 2. category: Fix Description: [74284][Red Fish] Powersupply status is absent but health condition show "ok" Impact motherboard: All Affected functions: Validation : 1. connect to redfish/v1/Chassis/1/Power to check power supply status 3. category: Fix Description: Power consumptio reading is missing during with 'ipmitool' command. Impact motherboard: X10DRU-I+ Affected functions: Validation : 1.AC Power on the system 2.Use 0x30 0xE2 commands to get power reading value if it not zero ------------------------------------------------------------------------------- Filename: REDFISH_X10_346.bin version: 3.46 Date: 10-14-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r31 Redfish/iKVM version : 1.0.1 Note: This version is for X10SDV series motherboard 1. Category: Fix Description: [74203] [BIOS ECO 1.1c] NM function is not workable. [74192] [BIOS ECO 1.1c] NM function is not workable. Impact motherboard: X10SDV Affected functions: Validation : 1. Use SMCIPMITool nm20 command. ------------------------------------------------------------------------------- Filename: REDFISH_X10_345.bin version: 3.45 Date: 09-19-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r31 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: [73219] Fans do not spin up when GPU temperature rises, causing GPU overheat when stressing only the GPU Impact motherboard: X10DRT-P Affected functions: Validation : 1. Insert GPUs 2. Heat GPU and check if fan speed rises accordingly 2. Category: Fix Description: [72782] SUM 1.6.1(2016/07/06) Test fail. [72493] SUM v1.6.1(2016/07/06) fail via smstc. Impact motherboard: X10QBi Affected functions: Validation : 1. Run TC_212, 219, 229 2. Check the result is pass. 3. Category: Fix Description: [72204] [IPMI] The console windows will jump from background to foreground when a character arrives on the screen. Impact motherboard: All Affected functions: Validation : 1. Lunch the iKVM viewer 2. Check the behavior of iKVM viewer 4. Category: Fix Description: [72560] IPMI "BIOS Update" function is fail [72497] BIOS update fail by IPMI WebGUI Impact motherboard: A2SDI-H-TP4F, A2SDI-TP8F Affected functions: Validation : 1. Update bios from bios update page. 2. Check if bios update successful. 5. Category: Fix Description: [71429] Fan Pulse-Width-Modulation Measurement fail Impact motherboard: A2SDI-H-TP4F Affected functions: Validation : 1. Check 10G LAN temp sensor should show up in sensor readings page. 6. Category: Fix Description: [72559] IPMI "iKVM Reset" function is fail Impact motherboard: All Affected functions: Validation : 1. Insert USB stick into USB port. 2. Do iKVM reset. 3. iKVM should be reset and iKVM function should work after reset. ----------------------------------------------------------------- Filename: REDFISH_X10_344.bin version: 3.44 Date: 08-18-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r27 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: Support on board NVMe Impact motherboard: X10DRD, X10DRD_L Affected functions: Validation : 1. Insert NVMe drives. 2. Check the NVMe web gui. 2. Category: Fix Description: [68370] No Thermal Trip event. Impact motherboard: X10SLA-F Affected functions: Validation : 1. Heat the CPU to shutdown. 2. Check the event log. 3. Category: Fix Description: Sensor will show "N/A" forever at cburn AC on/off test Impact motherboard: X10SRI Affected functions: Validation : 1. Do curn AC On/Off test 2. Check sensor reading web gui ----------------------------------------------------------------- Filename: REDFISH_X10_343.bin version: 3.43 Date: 08-xx-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r27 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: [72948] [1U TwinPro] FAN2 and FAN3 always in FAN FAIL state after updating BMC FW to 3.40+ Impact motherboard: X10DRT-P (1U TwinPro) Affected functions: Validation : 1. Check the sensor list page. ----------------------------------------------------------------- Filename: REDFISH_X10_342.bin version: 3.42 Date: 08-04-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r27 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: [72537] No CPU Throttle event in IPMI Event Log page Impact motherboard: A2SDI-LN4F, A2SDR-TP8F Affected functions: Validation : 1. heat the CPU up 2. Category: Fix Description: [72720] VDIMM from E to H reporting upper non-recoverable Impact motherboard: X10DRG-O Affected functions: Validation : 1. Check VDIMMEF, VDIMMGH senosr status when CPU2 is not inserted 3. Category: Enhancement Description: [72682] When Chassis Intru trigger, Chassis Intru will be reseted automatically after system AC off/on Impact motherboard: X10SDV Affected functions: Validation : 1. Lanuch chassis intrusion 2. AC off/on the system 3. Check the chassis sensor if the state keeps at chassis intrusion 4. Category: Fix Description: [68570] "VM mount ISO failed when enter ipv6 as sharehost" VM fail to mount ISO file in WebGUI when fill in ipv6 address instead of ipv4 address in the sharehost text box Impact Motherboard: X10 motherboards Affected functions: Validation : 1. mount ISO file in WebGUI with ipv4 address as sharehost 2. check and confirm ISO file mounted successfully 3. unmounts ISO file and change ipv4 address to ipv6 address for the same file host 4. the same ISO file mount will fail 5. Category: Fix Description: [72356] Should be remove "Share LAN" item in Network page Impact motherboard: X10SDV-4C-TLN2BF Affected functions: Validation : 1. Please do 0x30 0x41 command aftre FW is updated 2. Check the IPMI network setting web gui 3. Check LAN Interface of network web gui. It should be "dedicate" ----------------------------------------------------------------- Filename: REDFISH_X10_341.bin version: 3.41 Date: 07-26-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r27 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: [70007] Jumper JL1 function test fail. [72495] Chassis Intru is not present in Sensor reading page Impact motherboard: A2SDI-LN4F, A2SDR-TP8F Affected functions: Validation : 1. Power on the system and boot into the OS. 2. Check the Sensor reading page. 3. Chassis Intru should be present. 2. Category: HW Workaround Description: [70604] No CPU Throttle and Thermal Trip Event log in IPMI Web when Thermal trip event occur. Impact motherboard: X10QBL Affected functions: Validation : 1. Triger thermal trip. 2. Check the SEL. 3. Power off the system. 4. Make sure there is no Thermal trip SEL. 3. Category: Fix Description: [71206] [IPMI ECO] Nvidia M4 GPU sensor Missing in IPMI Impact motherboard: X10DRC-LN4+-P,X10DRC-T4+-P Affected functions: Validation : 1. Check GPU sensors can be detected at slot 3 or slot 5 4. Category: HW Workaround Description: Disable PROC_HOT function Impact motherboard: X10SLA Affected functions: Validation : 1. There should be no any Automatically throttled SEL. 6. Category: New Feature Description: AOC-2UR66-i4XTF no temperature reading Impact motherboard: X10DRU-I Affected functions: Validation : 1. Check on board LAN sensor temperature 7. Category: Fix Description: [72512] CPU1 Temp and CPU2 will frequently show N/A while in OS with IPMI Impact motherboard: X10DRG-O with X10DRG-O-PCIE board Affected functions: Validation : 1. Fully populated 10 GPU sensors 2. Check sensor status frequently ----------------------------------------------------------------- Filename: REDFISH_X10_340.bin version: 3.40 Date: 07-15-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r27 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: [71982] The MAC quantity returned by IPMI OEM command are not match IPMI web site Impact motherboard: X10SDV-2C-TP8F Affected functions: Validation : 1. Use 0x30 0x9f commands. It should return over 73 Bytes 2. Category: Fix Description: [72268] FAN mode default optimal mode on dual cooling zone motherboard Impact motherboard: X10SDV-8C-TLN4F+ Affected functions: Validation : 1. Do factory default acation and check Fan default mode 3. Category: New Feature Description: [72356] IPMI only sees 8 GPU instead of 10 [72211] [X10DRG-O-PCIe] GPU Sensor readings are not in the correct order Impact motherboard: X10DRG-O with X10 PCIE board Affected functions: Validation : 1. Install GPUs on PCIE board. 2. Please check the mapping between GPU number and slot number Slot 1 -> GPU1 Slot 2 -> GPU2 Slot 3 -> GPU3 Slot 4 -> GPU4 Slot 5 -> GPU5 Slot 8 -> GPU6 Slot 9 -> GPU7 Slot 10 -> GPU8 Slot 11 -> GPU9 Slot 12 -> GPU10 4. Category: New Feature Description: [72340] AOC-UR-i4XTF no temperature reading Impact motherboard: X10DRU-I Affected functions: Validation : 1. Check on board LAN sensor temperature ----------------------------------------------------------------- Filename: REDFISH_X10_339.bin version: 3.39 Date: 07-06-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r27 Redfish/iKVM version : 1.0.1 1. Category: HW workaround Description: [72239] 5V dual is lower critical [72238] 5V dual is lower critical [72115] FAN mode didn't show optimal mode [72058] No FAN-A reading Impact motherboard: X10SDV-xxC-TLN4F+, X10SDV-4C-TLN2BF Affected functions: Validation : 1. Please confirm HW if GPIOH2 and GPIOH3 are reworked 2. Check sensor reading web gui 2. Category: Fix Description: [70765] Fan PWM fail (The IPMI sensor show LAN 1G(I350) temperature, but when I350 temperature rises, the fan speed does not increase.) Impact motherboard: A2SDI Affected functions: Validation : 1. No support temperature for I350, remove 1G temp from SDR. 3. Category: Hardware Workaround Description: Change the Thermal trip to low-level triggered. Remove the PROC_HOT and use Upper Ctritial to control the OH LED and Buzzer. Impact motherboard: X10QBL Affected functions: Validation : 1. Make CPUs hot and check the OH LED, Buzzer. 2. Make sure there are no Automatically Throttled SEL. 3. Make the CPU hot enough and make system shutdown. 4. Check the Thermal trip SEL. ----------------------------------------------------------------- Filename: REDFISH_X10_338.bin version: 3.38 Date: 06-27-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r27 Redfish/iKVM version : 1.0.1 1. Category: Workaround solution Description: IPMI solution for M40 leakage on GPU systems Impact motherboard: X10DRG-Q, X10DRG-H, X10DRG-O, X10SRG Affected functions: Validation : 1) 1. MB Boot Feature ¡§Restore on AC Power Loss¡¨ set to ¡§Stay Off¡¨ 2. AC and PS on/off 3. Interrupt IPMI Initialization, press and hold PSON button to force system shut down. Measure 3.3V. 2) 1. MB Boot Feature ¡§Restore on AC Power Loss¡¨ set to ¡§Last State¡¨ 2. AC and PS on/off 3. IInterrupt IPMI Initialization (tested @20s, 30s, 40s, 50s), press and hold PSON button to force system shut down. Measure 3.3V. Measure B12 pin. On the left side 12th pin of PCIE connector. 2. Category: Fix Description: [71214] No UID control Impact motherboard: X10DRI Rev1.02B Affected functions: Validation : 1. Check UID web gui if exists ----------------------------------------------------------------- Filename: REDFISH_X10_337.bin version: 3.37 Date: 06-20-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r27 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: [71214] PERR/SERR sensor name not consistant Impact motherboard: X10DSC-TP4S Affected functions: Validation : 1. Launch SMCIPMIView and send PERR/SERR event 2. Check trap content in SMCIPMIView 3. Compare the format if the same as event log IPMI web page 2. Category: Hardware Work Around Description: Adjust the CPU VRM register 0xe8 value to 0x12 Impact motherboard: X10DRI Rev1.02B Affected functions: Validation : 1. Check the CPU VRM 0xe8 register value. 3. Category: Fix Description: [70604] No CPU Throttle and Thermal Trip Event log in IPMI Web when Thermal trip event occur. Impact motherboard: X10QBL Affected functions: Validation : 1. Triger thermal trip. 2. Check the SEL. 3. Power off the system. 4. Make sure there is no Thermal trip SEL. 4. Category: New motherboard support Description: [71725] NM function is fail and show not support Node Management [71716] Peripheral Temp, MB_10G Temp reading is "N/A" in IPMI Sensor Reading page [71715] No "FANA" sensor in IPMI Sensor Reading page Impact motherboard: X10SDV-12C-TLN4F+- Affected functions: Validation : 1. Updating BMC FW and do 0x30 0x40 command 2. Check sensor reading web gui 3. Chekc NM function 5. Category: Fix Description: [71429] Fan Pulse-Width-Modulation Measurement fail for A2SDI Impact motherboard: A2SDI Affected functions: Validation : 1. Optimal mode and heavy IO mode are available in fan mode page. 6. Category: Fix Description: [70765] Fan PWM fail (The IPMI LAN 10G temperature sensor display is not X557(10G), this is not correct.) Impact motherboard: A2SDI Affected functions: Validation : 1. 10G and 1G LAN temp are switched in previous release. Corrected in this version. ----------------------------------------------------------------- Filename: REDFISH_X10_336.bin version: 3.36 Date: 05-27-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r27 Redfish/iKVM version : 1.0.1 1. Category: Enhancement Description: iKVM/HTML5 is hidden on 3.35 Impact motherboard: All Affected functions: Validation : 1. Check this funciton is enable 2. Category: Fix Description: [70663] SD5 missing BPN2 temp Impact motherboard: X10DSC-TP4S Affected functions: Validation : 1. Check BPN2 senosr number is unique ----------------------------------------------------------------- Filename: REDFISH_X10_335.bin version: 3.35 Date: 05-26-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r27 Redfish/iKVM version : 1.0.1 1. Category: New Feature Description: [70454] AOC-MHIBF-2QG] No IB Temperature Sensor Reading in Impact motherboard: X10DRT-PS Affected functions: Validation : 1. Insert AOC IB card 2. Power on the system and check sensors 2. Category: Fix Description: [71206] [IPMI ECO] Nvidia M4 GPU sensor Missing in IPMI. Impact motherboard: X10DRC Affected functions: Validation : 1. Install an Nvidia M4 GPU onto the system. 2. Check the sensor list. 3. Category: Fix Description: [71198] IPMI FW 3.33 not showing NVMe drive information after hot inserted. System reboot is required in order to show the information Impact motherboard: All X10 motherboards which support NVMe drives Affected functions: Validation : 1. Eject NVMe drive and wait for action is done 2. Insert drive again 3. It should see NVMe VPD information on web gu 4. Category: Fix Description: [71291] (REDFISH_X10_334, IPMIWebTest) Some Information Lost From System Summary [71284] [IPMI ECO 3.34] BIOS, CPLD, redfish version gone in 3.34. [71392] Web GUI not showing BIOS information and MAC address Impact motherboard: all Affected functions: Validation : 1.After FW is updated, reboot the system 1.Login IPMI Web check firmware version 5. Category: Fix Description: [71336] [IPMI ECO 3.34]iKVM windows has noise with wrong resolution size. [71335] Remote console is broken. Impact motherboard: all Affected functions: Validation : 1. Login IPMI Web 2. Open iKVM function to check 6. Category: Fix Description: [71223] 4 SUM Test Case Fail [70334] [1.0 BIOS ECO] SUM test failed [71398] SUM test is fail Impact motherboard: all Affected functions: Validation : 1. Please do ECO test 2. Check if 215 test case is passed 7. Category: Fix Description: [70870] Fan PWM fail Impact motherboard: A2SDI Affected functions: Validation : 1. Check memory sensor if appears 2. Heat 10G sensor and check if duty raise 8. Category: Fix Description: [70859] Enter Key Causes Session Logout under Web Session Feature Impact motherboard: all Affected functions: Validation : 1. When user attempts to modify timeout value, hitting ENTE> key will force session to logout. It should not. ----------------------------------------------------------------- Filename: REDFISH_X10_334.bin version: 3.34 Date: 05-19-2016 Note: Do factory defualt after updating fw Please clear broswer cache Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r27 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: [70904] Invalid Offset for this SensorType - Assertion after IPMI upgrade. Impact motherboard: X10QBi Affected functions: Validation : 1. Make a chassis intrusion. 2. Check the SEL log. 2. Category: Fix Description: [71035] sensor name in IPMI& SD5 not match hardware monitoring sensor list. Impact motherboard: X10SDE-DF Affected functions: Validation : 1. Restore to factory default to apply new SDR. 2. Check in IPMI Web sensor page 3. Category: Enhancement Description: [70997] [NM] Can't get entire platform power statistics. Impact motherboard: X10SDE-DF Affected functions: Validation : 1. Power on system 2. issue nm20 statistics command 4. Category: Enhancement Description: iKVM connection use STUNNEL only for security manner. Impact motherboard: All Affected functions: Validation : 1. Reset to factory default by using the following command: ipmitool -I lanplus -H ${BMC_IPADDR} -U ADMIN -P ADMIN raw 0x30 0x40 2. Connect the system with iKVM. It should be work. 3. Change iKVM port and check whether iKVM works. ----------------------------------------------------------------- Filename: REDFISH_X10_333.bin version: 3.33 Date: 04-29-2016 Note: Do factory defualt after updating fw Please clear broswer cache Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r27 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: [70006] Header JPI2C1 function test fail Impact motherboard: A2SDI-LN4F A2SDI-TP8F Affected functions: Validation : 1. Power on the system. 2. Check the power status sensor. 2. Category: Fix Description: [70372] Cannot find CPU vcore sensor reading item. Impact motherboard: X10SDD Affected functions: Validation : 1. Restore to factory default and power on the system. 2. Check the Vcore sensor. 3. Category: Enhancement Description: Support GPU threshold in GPU thermal guide 1.09. Impact motherboard: All Affected functions: Validation : 1. Reset to factory default by using the following command: ipmitool -I lanplus -H ${BMC_IPADDR} -U ADMIN -P ADMIN raw 0x30 0x40 2. power on the system with GPU card. 3. Check the GPU sensor threshold, refer to GPU thermal guide 1.09 (table 5-2) for detail threshold value. 4. Category: Fix Description: [70333] IPMI hardware monitor check fail Impact motherboard: A2SDI-LN4F A2SDI-TP8F Affected functions: Validation : 1. Power on the system. 2. Check Sensor Readings page. 5. Category: Fix Description: [70512] [Firmware RF v3.32] Lots of "PCH temp sensor" assert/de-assert events occurred within system is running stress. Impact motherboard: X10QBi. Affected functions: Validation : 1. Power on the system. 2. Check the Event Log page. 6. Category: Fix Description: [70429] The IPMI sensor readings test fail. Impact motherboard: X10SRM, X10DRT-L Affected functions: Validation : 1. Install Broadwell R0 CPUs 2. Check if memory sensors display correctly 7. Category: Enhancement Description: [70371] Share LAN status from AOC-STGS-i2T is 100M Impact motherboard: X10DRG-Q Affected functions: Validation : 1. This validation only use 1G/10G share LAN functions. For multridrop function, this is OEM feature 2. Please send 0x30 0x70 0x76 0x1 0x1 to enable multiple package support 3. BMC do reboot 4. Plug in 1G or 10G LAN cables and check network status on IPMI web gui 5. Please send 0x30 0x70 0x76 0x1 0x0 ti disable multiple package id support 8. Category: Fix Description: [70601] Not allow to key in special character in SMTP password field. Impact motherboard: All Affected functions: Validation : 1. type in the special characters in SMTP password. 2. Check if any messages poped out. 9. Category: Fix Description: [70473] Can't get entire platform Power statistics. Impact motherboard: X10SDD-F Affected functions: Validation : 1. use the nm command to get power statistics 10. Category: Fix Description: [70642] sum test fail with IPMI 3.32FW Impact motherboard: X10QBL Affected functions: Validation : 1. run sum GetDMIInfo command to get dmi file. 11. Category: Fix Description: [70695] Four voltages sensor are not in the right order. Impact motherboard: X10QRH Affected functions: Validation : 1. Restore to factory default to apply new SDR. 2. Check Vcpu1/Vcpu2/Vcpu3/Vcpu4 sensor threshold values. 12. Category: New feature Description: 10G/40G AOC Naming rule change. Impact motherboard: All X10 MB Affected functions: Validation : 1. insert 10G/40G AOC, the name should show AOC_NIC_Temp. 13. Category: New Feature Description: Support NVIDIA M4 GPU Impact motherboard: All X10 MB Affected functions: Validation : 1. Insert NVIDIA M4 GPU in MB. 2. Check the sensor page 14. Category: Enhancement Description: [70096] PCIE SERR/PERR Alert mail "Sensor ID" is empty Impact motherboard: All X10 MB Affected functions: Validation : 1. Register SMTP account 2. Issue PCIE SERR/PERR event 3. Get email alart 4. Check "Sensor ID" item. It should have sensor number or sensor name ------------------------------------------------------------------------------------ Filename: REDFISH_X10_332.bin version: 3.32 Date: 03-31-2016 Note: Do factory defualt after updating fw Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r25 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: [70147] failed on mounting/unmounting ISO using SUM [70072] Mount iso image function failed with out-of-band interface [70069] fix [SUM] v1.6.1 test failed [70068] v1.6.1 test failed [70137] The test failed and got one error message "IPMI execution exception occurred" when executed Test cases 414 and 415 Impact motherboard: All Affected functions: Validation : 1. Do factory default action 2. Run SUM test 2. Category: New Feature Description: Support new motherboard: X10SDE-DF Impact motherboard: X10SDE-DF Affected functions: Validation : 1. Board ID: 0x092D. 3. Category: Fix Description: [70033] The temperature of 10G chipset didn't show in IPMI sensor reading. Impact motherboard: X10SDD-F Affected functions: Validation : 1. plug in AOC-CTGS-i2T lan card 2. check IPMI Web sensor reading 4. Category: Fix Description: [70007] Jumper JL1 function test fail Impact motherboard: A2SDI LN4F/TP8F Affected functions: Validation : 1. Generature a Chassis Intru log. 2. See the Chassis Intru function is good or not. 5. Category: Fix Description: [69996] FAN of HeavyIO mode test fail Impact motherboard: X10SRM Affected functions: Validation : 1. heat 10G senosr, pwm at right side should increase. 6. Category: Fix Description: [69893] PCH temp issue shows in Event log. Impact motherboard: X10QRH. Affected functions: Validation : 1. Power on the system. 2. Check the Event Log page. 7. Category: Fix Description: [69394] Overheat LED can't work. Impact motherboard: A2SDI LN4F/TP8F Affected functions: Validation : 1. Make the CPU overheat. 2. See the Proc_hot SEL is generated or not. 8. Category: Fix Description: [69881] Front panel OH/PF LED will blinking once during system power off Impact motherboard: X10SDV-7TP4F Affected functions: Validation : 1. Heat CPU to let overheat led blinking 2. Power off the system 3. Check 9. Category: Fix Description: [69993] LAN information is incorrect under IPMI WebGUI Impact motherboard: X10SDD-F Affected functions: Validation : 1. check IPMI WebGUI 10. Category: Fix Description: [70101] [IPMICFG] Change gate way fail. Impact motherboard: All Affected functions: Validation : 1. ipmicfg -dhcp off. 2. ipmicfg -m . 3. ipmicfg -k 255.255.255.0 4. ipmicfg -g ------------------------------------------------------------------------------------- Filename: REDFISH_X10_331.bin version: 3.31 Date: 03-25-2016 Note: Do factory defualt after updating fw Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r25 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: [69083] Lower Critical going low. [69893] PCH temp issue shows in Event log. Impact motherboard: X10QBL, X10QRH. Affected functions: Validation : 1. Power on the system. 2. Check the Event Log page. 2. Category: Fix Description: [69691] Redfish 3.30 Fan Speed misbehvior after restoring factory setting. [69755] The fan PWM duty cycle work abnormally. [69579] The fan PWM duty cycle work abnormally. Impact motherboard: X10QBL, X10DRG-H Affected functions: Validation : 1. Restore to factory default. 2. Check the fan PWM duty cycle. 3. Category: Fix Description: [69689] Some voltage monitor items not displayed [69688] CPU Vcore sensor reading is not available Impact motherboard: X10SDV-T Affected functions: Validation : 1. Do factory default. 2. Check sensor readings 4. Category: Enhancement Description: [69482] Random CPU Thermal Trip Events [68904] CPU thermal trip no SEL logs Impact motherboard: X10SDV-T Affected functions: Validation : 1. Heat CPU and until the system shutdown 2. Check no thermal trip event log 5. Category: Fix Description: [69885] The overheat LED didn't blink when power fail. Impact motherboard: X10SDD-F Affected functions: Validation : 1. Plug out PSU 2. The power fail red LED will blink ------------------------------------------------------------------------------------- Filename: REDFISH_X10_330.bin version: 3.30 Date: 03-04-2016 Note: Do factory defualt after updating fw Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r25 Redfish/iKVM version : 1.0.1 1. Category: Fix Description: [69472] PCH Temperature reporting asserted/deasserted. [69270] IPMI SEL keeps recording false PCH temper messages. [69263] IPMI SEL will log PCH Temperature Going Low events everytime system powers on. Impact motherboard: X10DRW-IT, X10DRT-PT, X10DRG-HT Affected functions: Validation : 1. Power on the system. 2. Check the Event Log page. 2. Category: Work around Description: [69147] Hardware monitor of RT1 is fail Impact motherboard: X10SDR-TP Affected functions: Validation : 1. BMC add 2 degree offsest fro RT1 2. Check the RT1 Temp sensor reading 3. Category: Work around Description: [69147] [1U TwinPro] PSU info randomly goes missing in DMI table when running on/off test Impact motherboard: X10DRT-P Affected functions: Validation : 1. Do cburn on/off test 2. Check if no power supply mismatch problem occurs ---------------------------------------------------------------------------------------- Filename: REDFISH_X10_329.bin version: 3.29 Date: 02-26-2016 Note: Do factory defualt after updating fw Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r25 Redfish/HTML5 iKVM version : 1.0.1 1. Category: Fix Description: [69011] PCH Sensor Reading Shows "N/A" Impact motherboard: All Affected functions: Validation : 1. This is only enhance the error handling, if ME has no response. 2. Check the PCH Temp sensor reading. 2. Category: Fix Description: [69270] IPMI SEL keeps recording false PCH temper messages. [69263] IPMI SEL will log PCH Temperature Going Low events everytime system powers on. Impact motherboard: X10DRW-IT, X10DRT-PT Affected functions: Validation : 1. Power on the system. 2. Check the Event Log page. 3. Category: Fix Description: [69294] [Redfish 3.28] Chassis intrusion status not correct Impact motherboard: All Affected functions: Validation : 1. trigger chassis intrusion event and check the status in "IntrusionSensor". 4. Category: Fix Description: [69266] Redfish 3.28 mispelled Snooping Impact motherboard: All Affected functions: Validation : 1. Go to the redfish URI: /redfish/v1/Managers/1/Snooping 5. Category: Fix Description: [69348] [DVT] CPU2 Overheat Won't Trigger the Red Overheat LED on Front Panel. Impact motherboard: X10DRT-PS Affected functions: Validation : 1. Heat the CPU2 to overheat. 2. Check the Front Panel LED. ----------------------------------------------------------------------- Filename: REDFISH_X10_328.bin version: 3.28 Date: 02-19-2016 Note: Do factory defualt after updating fw Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r25 Redfish/HTML5 iKVM version : 1.0.1 1. Category: New Feature Description: Support HTML5 Impact motherboard: All X10 Affected functions: Validation : 2. Category: New Feature Description: Support new motherboard: A2SDI-H-TP4F Impact motherboard: A2SDI-H-TP4F Affected functions: Validation : 1. Board ID: 0x0910. 3. Category: New Feature Description: [Redfish] SNMP feature is added. Impact motherboard: All Affected functions: Validation : 1. 'GET' all managers under the URN "redfish/v1/Managers/1" to check if there is "SNMP" in "oem" catagory. 2. Then 'GET' its URN path: "redfish/v1/Managers/1/SNMP". 3. 'GET' / 'PATCH' are acceptable operations. 4. "SnmpEnabled" can be 'PATCH' 5. After you set "SnmpEnabled" to 'true', check if there exist "SNMPv2" and "SNMPv3". 6. Then 'GET' its URN path: "redfish/v1/Managers/1/SNMP/SNMPv2" or "redfish/v1/Managers/1/SNMP/SNMPv3". 7. In SNMPv2 "ROCommunity" and "RWCommunity" can be 'PATCH' 8. In SNMPv3 "Snmpv3Enabled", "UserName", "AuthProtocol", "PrivateProtocol", "AuthKey" and "PrivateKey" can be 'PATCH' 4. Category: New Feature Description: [Redfish] Syslog feature is added. Impact motherboard: All Affected functions: Validation : 1. 'GET' all managers under the URN "redfish/v1/Managers/1" to check if there is "Syslog" in "oem" catagory. 2. Then 'GET' its URN path: "redfish/v1/Managers/1/Syslog". 3. 'GET' / 'PATCH' are acceptable operations. 5. Category: New Feature Description: [Redfish] Chassis Intrusion feature is added. Impact motherboard: All Affected functions: Validation : 1. Get command: https://IP/redfish/v1/Chassis/1/ 2. Clear Chassis Intrusion: 'PATCH' with data {"PhysicalSecurity":{"IntrusionSensor": "Normal"}} 6. Category: New Feature Description: [Redfish] SMCRAKP feature is added. Impact motherboard: All Affected functions: Validation : 1. Get https://x.x.x.x/redfish/v1/Managers/1/SMCRAKP 2. PATCH Raw data :{"Mode": "Enabled"} 7. Category: New Feature Description: [Redfish] support IP Access Control Impact motherboard: All Affected functions: Validation : 1. Get https://x.x.x.x/redfish/v1/Managers/1/IPAccessControl 2. Patch to enable/disable IPAceess with {"ServiceEnabled": true} 3. Get https://x.x.x.x/redfish/v1/Managers/1/IPAcessControl/FilterRule 4. 'GET'/'PATCH'/'POST' are acceptable operations. 5. Post with {"Address": "10.136.176.0", "PrefixLength": 24, "Policy": "Accept"} 8. Category: New Feature Description: [Redfish] support VM (Virtual Media) Impact motherboard: All Affected functions: Validation : 1. only 'GET' support, test it with Virtual media in Web 2. Get https://x.x.x.x/redfish/v1/Managers/1/VM1 9. Category: New Feature Description: [Redfish] Snopping Impact motherboard: All Affected functions: Validation : 1. only 'GET' support 2. Get https://x.x.x.x/redfish/v1/Managers/1/Snopping 10. Category: Fix Description: [68709] [Redfish v3.27] Failed to PATCH UID via https://IP/redfish/v1/Chassis/1/ with {"IndicatorLED": "Blinking"} Impact motherboard: All Affected functions: Validation : 1. Get the command for https://IP/redfish/v1/Chassis/1/ 2. patch with {"IndicatorLED": "Blinking"} 11. Category: Fix Description: [CRM SM1601107937] Supermicro Case#SM1601107937:A1SRI-2758F IPv6 static adress lost after reboot on IPMI Impact motherboard: All Affected functions: Validation : Go to Configuration - Network Screen shoot: x10_ipv6_address_configured_before_reboot_ipmi_pub.png Reboot the IPMI Go to Configuration - Network Screen shoot: x10_ipv6_address_lost_after_reboot_ipmi_pub.png Reproduce 1. Go to Configuration - Network 2. In IPv6 Setting: - untick Auto Configuration - Fill IPv6 address field with your IPv6 address/64. 3. Save 4. Go to Configuration - Network - You will see the static IPv6 address added previously in Address List of IPv6 setting - The static IPv6 address reply to ping. Reboot the IPMI 1. Go to Configuration - Network - You will NOT see the static IPv6 address added before reboot in Address List of IPv6 setting. - The static IPv6 address didn't reply to ping. 12. Category: Fix Description: [68753] [IPMI ECO 3.27] FAN A,B,C,D can not set to Optimal by redfish API Impact motherboard: All Affected functions: Validation : 1. Go to the redfish URI: /redfish/v1/Chassis/1/ then set fanmode to check 13. Category: Fix Description: [68829] "Not Present" for 10G/40G AOC sensor reading after AC OFF/ON [68177] 10G and 40G LAN Card sensor reading miss Impact motherboard: All Affected functions: Validation : 1. Put on the 10G/40G card. 2. Power on the system. 3. Check 10G/40G sensors. 14. Category: Fix Description: [68976] IPMI sensor reading for fan RPM is incorrect Impact motherboard: X10QBi Affected functions: Validation : 1. Check the RPM signal with the WebGUI reading. 15. Category: Workaround Description: [68946] After product release to enable BMC read LSI temperature from I2C cause system hung Impact motherboard: X10DRG-H, X10DRH, X10DRH-LN4, X10DRI, X10SRG Affected functions: Validation : 1. When LSI 3108 card is plugged in, no LSI sensor appeared, and LSI web is hidden 16. Category: Workaround Description: Cannot read Nivida M60 Impact motherboard: X10DRG-H Affected functions: Validation : 1. Download this FW to verify 17. Category: Fix Description: [69226] Can not show System LAN MAC address completely in IPMI Summary web page [69148] Hardware monitor of RT2 is fail [69147] Hardware monitor of RT1 is fail [68904] CPU thermal trip no SEL logs [68853] No sensor readings Impact motherboard: X10SDV-7TP8F/X10SDV-7TP4F Affected functions: Validation : 1. Check sensor reading web gui if all values are good 2. Check thermal trip function 18. Category: Enhancement Description: VBat sensor reading cannot immediatedly reflect the battery's presence/absense Impact motherboard: All Affected functions: Validation : 1. Remove battery, then goto sensor reading page to press the button "Auto Refresh" to speed up for reflect the battery 2. Install back battery, and then perform "stop auto refresh" and "auto refresh" button pressing in a row. ======================================================================================== Filename: REDFISH_X10_327.bin version: 3.27 Date: 01-18-2016 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r25 1. Category: Fix Description: [68394] RedFish - The time zone format is incorrect. Impact motherboard: All Affected functions: Validation : 1. Change the time zone from the WebGUI and read it by using the redfish API. 2. Check The time zone format 2. Category: Fix Description: [68389] [Red_fish] Return Message is incorrect Impact motherboard: All Affected functions: Validation : 1. Post the command for https://IP/redfish/v1/Systems/1/Actions/ComputerSystem.Reset with {"ResetType":"????%#@"} 2. Check http error code 3. Category: Fix Description: [68390] [Redfish v3.26] Administrator/ReadOnlyUser confusion resulted in misbehavior Impact motherboard: All Affected functions: Validation : 1. Generated two accounts (different password) using the same username with one in Administrator group one in ReadOnlyUser group. 2. To login using the ReadOnlyUser account and check privileges. 4. Category: Fix Description: [68416] [Red_Fish]Return message not correct--{"IndicatorLED": "klkl"} Impact motherboard: All Affected functions: Validation : 1. Patch the command for https://IP/redfish/v1/Chassis/1/ with {"IndicatorLED": "klkl"} 2. Check http error code 5. Category: Fix Description: [68351] RedFish - No CPU model name and the max speed is always 4000MHz Impact motherboard: All Affected functions: Validation : 1. Get the command for https://IP/redfish/v1/Systems/1/Processors/1 2. Check CPU Model name with WebGUI -> Hardware Information 6. Category: Fix Description: [67813] [EVT]FP LED - Overheat LED for CPU2 failed Impact motherboard: X10DSC-TP4S Affected functions: Validation : 1. Stress CPU2 temp to observe. 2. Check if red led turns on very quickly before it touch Tjamx degree 7. Category: Fix Description: [68010] AOC-STG-i2T 10G LAN cards is not supported. Impact motherboard: X10DRG-O Affected functions: Validation : 1. Put the AOC-STG-i2T onto slot 5,6,7 of PCIe board. 2. Check the 10G temp sensor. 8. Category: Fix Description: [68467] Wrong CPU sensor id [68464] Wrong sensor id Chassis Impact motherboard: All Affected functions: Validation : 1. Set the SMTP and alert correctly. 2. Generate CPU/Chassis related SEL. 3. Check the email wording. 9. Category: Fix Description: [68411] [Redfish v3.26]Radius Secret is hidden in IPMIGUI but API displays the entire string. Impact motherboard: All Affected functions: Validation : 1. Update(or do PATCH in redfish) RADIUS information and get it back to check 10. Category: Fix Description: [67259] Not easy to identify if there are multiple controllers installed Impact motherboard: All Affected functions: Validation : 1. Install 2 Avago 3108 devices then go to web to check the information subpage 11. Category: New Feature Description: Support new motherboard: X10SDD-F Impact motherboard: X10SDD-F Affected functions: Validation : 1. Board ID: 0x0919. 12. Category: New Feature Description: Support new motherboard: A2SDI-TP8F Impact motherboard: A2SDI-TP8F Affected functions: Validation : 1. Board ID: 0x090F. 13. Category: Fix Description: [67486] [SUM 1.6.0(2015/11/20)] Test fail. Impact motherboard: X10SLL Affected functions: Validation : 1. Run the test 229. 2. Check the result. 14. Category: Workaround Description: [65729] BIOS ECO:[SUM 1.4.2] SUM Test fail. Impact motherboard: A1SAM-2750F/A1ASM-2550F/A1SRM-2758F Affected functions: Validation : 1. Run SUM test or try to BIOS upgrade ======================================================================================== Filename: REDFISH_X10_326.bin version: 3.26 Date: 12-18-2015 Support Motherboard: All X10 MBs U-Boot build time : 2009.01 (Nov 27 2013) Java SOL Viewer version : v0.5.9 Java iKVM Viwer version : v1.69 r24 1. Category: New implementation Description: Add 10 MBs to support redfish service. Impact motherboard: A1SA2, A1SA7, A1SAI, A1SAM, A2SCL, A1SAM_LN7F X10DBT_T, X10QBI, X10QBL, C7X99, C7Z97, X10QRH_PLUS X10SLM, X10SRE, X10SLH_N6, X10SLM_LN4, Affected functions: Vagidation : 2. Category: New Feature Description: Support 10G temperature reading on AOC-CTGS-i2T card Impact motherboard: X10SLD-F with AOC-CTGS-i2T card Affected functions: Validation : 1. Plug in AOC-CTGS-i2T card on X10SLD-F 2. Power on and check the sensor reading 3. Category: New Feature Description: [68016] [EVT] X10DSC-TP4S Rev1.00: Hardware Monitor Test Fail Solved [67763] [EVT] BP (35R0-202142-10100F) FAN headers are not working properly [67759] [EVT] Onboard 10G-LAN Temp" Sensor not present in v2.24 firmware Impact motherboard: X10DSC-TP4S Affected functions: Validation : 1. Check sensor reading 4. Category: New implementaion Description: [67778] [SUM 1.6.0] Change LAN mode to supported mode will cause IPMI dead. Impact motherboard: All Affected functions: Validation : 1. Run the SUM command changebmccfg --file Template/dedicated.xml. 5. Category: Fix Description: [67853] NVMe SSD tab in IPMI Web GUI shows traditional HD. Impact motherboard: X10QBi Affected functions: Validation : 1. Check the WebGUI, if there are no NVMe devices, NVMe page should not present. 6. Category: Enhancement Description: [64890] "[Redfish] System stop in "Factory Default" page and cannot back to Login page after press "Factory Default" button" Impact motherboard: X10QBi Affected functions: Validation : 1. Check the WebGUI will back to Login page after press "Factory Default" button". 7. Category: Fix Description: [67634] [1U-1028TP] No Backplane Nuvoton MCU Firmware Update Tool. Impact motherboard: X10DRT-P (1U TwinPro) Affected functions: Validation : 1. Check the WebGUI will have page to update Nuvoton MCU FW. 8. Category: Fix Description: [67642] [SUM v1.60] sum test fails. Impact motherboard: X10QBi Affected functions: Validation : 1. Run the SMSTC test: TC226 and TC227. 2. Check the result. 9. Category: Enhancement Description: Support FANA on X10SDV 2.0 Support 10G sensors on all motherboards Impact motherboard: X10SDV 1.0 and X10SDV 2.0 Affected functions: Validation : 1. All X10SDV motherboards should support MB_10G sensor. 2. If motherboard is X10SDV 1.0, one zones are supported 10. Category: fix Description: [67919] [REDFISH_X10_325] "service received an authorization error authorized" while try to GET "https://BMC_IP/redfish/v1/...." Impact motherboard: All motherboards support Redfish Affected functions: Validation : 1.GET "https://BMC_IP/redfish/v1/................" (AccountService, Managers, Systems, or Chassis .....) to check whether ok. 11. Category: fix Description: [67625] [Red Fish] The status reponse incorrect message, 200 OK Impact motherboard: All motherboards support Redfish Affected functions: Validation : 1. Patch data to "redfish/v1/Managers/1/NTP". 2. {"NTPEnable": true,"PrimaryNTPServer": "supermicro", "SecondaryNTPServer": "1.us.pool.ntp.org","DaylightSavingTime": true} 3. check status code and error message. 12. Category: Fix Description: [68052] IERR Assertion in IPMI SEL during ONOFF test with M0 Stepping Broadwell CPU. [68012] lots of "Processor IERR Assertion" in IPMI event log when running PCH on/off with IPMI FW v3.25 [68011] lots of "Processor IERR Assertion" in IPMI event log when running PCH on/off via BMC [67969] [firmware v2.24 / redfish v3.25] System generates "Processor - IERR -Assertion" event logs if run Cburn on/off stress. Impact motherboard: X10DDW-IN-P, X10DRH-CLN4-P, X10DRH-CT-P, X10DRFR-NT-P, X10DRT-P, X10DRU-I+ Affected functions: Validation : 1.run PCH on/off. PS: only Enable CPUERR feature on X10DRT-P, X10DRU-I+ only. ======================================================================================== Filename: REDFISH_X10_325.bin version: 3.25 Date: 12-11-2015 Support Motherboard: X10SRH, X10SLH, X10SLE, X10SRL, X10SLX, X10SRA, X10SRD, X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD, X10DRD-L, X10DRW-E, X10DRG-O+-CPU, X10DRG-Q, X10DRH-I, X10DRC, X10DRL_I, X10DRT_L, X10DRU_X, X10DRH_LN4, X10DRX, X10DRU_XLL, X10SRG, X10SRI, X10SRW, X10SDV, X10SL7 X10SLA, X10SLD, X10SLE_D, X10SLL, X10SLL_PLUS 1. Category: New implementation Description: Add 10 MBs to support redfish service. Impact motherboard: X10SRG, X10SRI, X10SRW, X10SDV, X10SL7 X10SLA, X10SLD, X10SLE_D, X10SLL, X10SLL_PLUS Affected functions: Validation : 2. Category: fix Description: [67625] [Red Fish] The status reponse incorrect message, 200 OK Impact motherboard: All motherboards support Redfish Affected functions: Validation : 1. Patch data to "redfish/v1/Managers/1/NTP". 2. {"NTPEnable": true,"PrimaryNTPServer": "supermicro", "SecondaryNTPServer": "1.us.pool.ntp.org","DaylightSavingTime": true} 3. check status code. 3. Category: fix Description: [67248] [Redfish] Cannot PATCH Active Directory Role Group Domain with PERIOD Impact motherboard: All motherboards support Redfish Affected functions: Validation : 1. Connect to "redfish/v1/Managers/1/ActiveDirectory/RoleGroups/" 2. POST data {"RoleGroupName":"test", "RoleGroupDomain":"bling.com","RoleGroupPrivilege":"Operator"} 3. PATCH data {"RoleGroupName":"test", "RoleGroupDomain":"10.136.176.96","RoleGroupPrivilege":"Operator"} ======================================================================================== Filename: REDFISH_X10_324.bin version: 3.24 Date: 11-20-2015 Support Motherboard: X10SRH, X10SLH, X10SLE, X10SRL, X10SLX, X10SRA, X10SRD, X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD, X10DRD-L, X10DRW-E, X10DRG-O+-CPU, X10DRG-Q, X10DRH-I, X10DRC, X10DRL_I, X10DRT_L, X10DRU_X, X10DRH_LN4, X10DRX, X10DRU_XLL 1. Category: New implementation Description: Add 10 MBs to support redfish service. Impact motherboard: X10DRC, X10DRH_LN4, X10DRL_I, X10DRT_L, X10DRU_X, X10DRU_XLL, X10DRX, X10SLX, X10SRA, X10SRD Affected functions: Validation : 2. Category: fix Description: [66840] The Syslog doesn't have the "help" translation on IPMI WebGUI. Impact motherboard: All motherboards support Redfish Affected functions: Validation : 1. Connect to Syslog in simple chinese page and check "help". 3. Category: fix Description: [66931] RedFish_3.23 The "RoleGroupPrivilege" can't be set as "Administrator" (ActiveDirectory) Impact motherboard: All motherboards support Redfish Affected functions: Validation : 1. Connect to "redfish/v1/Managers/1/ActiveDirectory/RoleGroups" 2. POST data to add rolegroup with "RoleGroupPrivilege":"Administrator" 4. Category: fix Description: [66971] [Red_Fish] Status Return Incorrectly Impact motherboard: All motherboards support Redfish Affected functions: Validation : 1. Connect to "/redfish/v1/Managers/1/SerialInterfaces/1" 2. PATCH data with {"InterfaceEnabled": false}. 3. check http code. 5. Category: fix Description: [66905] [Red_fish] Return Message is incorrect Impact motherboard: All motherboards support Redfish Affected functions: Validation : 1. Connect to "redfish/v1/EventService/Subscriptions/" 2. POST data {"Destination":"http://www.dnsname.com/Destination1","Context":"user1_test","Events":["Alert","StatusChange"],"Protocol":"Redfish"} 3. check http code and error message. 6. Category: fix Description: [66843] RedFish_3.22 can use the same username to create accounts. Impact motherboard: All x10 motherboards Affected functions: Validation : 1. create one Administrator and one ReadOnlyUser by using the same name (by Redfish). 2. login to WebGUI, the user will be Administrator and link to Power Control page to make sure user can config 7. Category: fix Description: [67248] [Redfish] Cannot PATCH Active Directory Role Group Domain with PERIOD Impact motherboard: All motherboards support Redfish Affected functions: Validation : 1. Connect to "redfish/v1/Managers/1/ActiveDirectory/RoleGroups/" 2. POST data {"RoleGroupName":"test", "RoleGroupDomain":"bling.server","RoleGroupPrivilege":"Operator"} 3. PATCH data {"RoleGroupName":"test", "RoleGroupDomain":"bling.server","RoleGroupPrivilege":"Operator"} 8. Category: fix Description: [67229] No 10G card sensor reading on IPMI web [67152] [Red_Fish] Can't detect AOC 10G and 40G Sensor Reading Impact motherboard: All motherboards in X10 Affected functions: Validation : 1. check sensor reading in web page. ======================================================================================== Filename: REDFISH_X10_323.bin version: 3.23 Date: 11-06-2015 Support Motherboard: X10SRH, X10SLH, X10SLE, X10SRL X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD, X10DRD-L, X10DRW-E, X10DRG-O+-CPU, X10DRG-Q, X10DRH-I 1. Category: New implementation Description: X10DRG-Q and X10SRL support redfish service. Impact motherboard: X10DRG-Q and X10SRL Affected functions: Validation : 2. Category: Fix Description: [66810] RedFish_3.22 Vlan can't be enabled if Lan cable is not plug in Dedicate port. Impact motherboard: All X10 motherboards which support Redfish Affected functions: Validation : 1. "PATCH" Vlan information on /redfish/v1/Managers/1/EthernetInterfaces/1 with data {"VLAN": {"VLANEnable":true,"VLANId": 12}}. 3. Category: Fix Description: [66726] Redfoish v3.22] Failed to PATH "SecondaryNTPServer" under URN "https://BMC_IP/redfish/v1/Managers/1/NTP/" [66816] [Redfish] Cannot PATH NTP secondary server Impact motherboard: All X10 motherboards. Affected functions: Validation : 1. Patch SecondaryNTPServer and check value. 4. Category: fix Description: [66840] The Syslog doesn't have the "help" translation on IPMI WebGUI. Impact motherboard: All motherboards support NVMe Affected functions: Validation : 1. Connect to Syslog in Japanese page and check "help" 5. Category: Fix Description: [66571 ] Redfish 3.21: redfish/v1/Managers/1/LDAP-> Patch operation allows invalid "LDAPPortNumber" value. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Password will not show in response 2. IPMI web do display SSL authentication field enabled when set enable. 6. Category: Fix Description: [66856] RedFish_3.22 "ReadOnlyUser" has the privilege to power control the system by API. Impact motherboard: All X10 motherboards which support Redfish Affected functions: Validation : 1. Create an ReadOnlyUser account to test. 7. Category: Fix Description: [66812] Redfish 3.22 allows GET/POST/PATCH operations using HTTP service. Impact motherboard: All X10 motherboards which support Redfish Affected functions: Validation : 1. Disable "ssl-redirect" in web then access Redfish APP via HTTP, the result should be returned as "Forbidden". 8. Category: Fix Description: [66809] Redfish API can't report correct DIMM installed with 64GB installed Impact motherboard: All X10 motherboards. Affected functions: Validation : 1. Install memory which size larger than 32GB then access Redfish to check. 9. Category: Fix Description: [66464] Redfish_3.20: Boot order change for USB doesnot work it still boots to HDD. [66804] [Redfish] BootSourceOverride does not read paramter correctly. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. GET boot options in the redfish URI "/redfish/v1/Systems/1". 2. Then PATCH different options in the same URI with the data: { "Boot": { "BootSourceOverrideEnabled": ${RULE_YOU_CHOOSE}, "BootSourceOverrideTarget": ${OPTION_YOU_CHOOSE} } } 3. Reboot to BIOS setup page to check boot order. 10. Category: Fix Description: [66841] [Redfish] /redfish/v1/Systems/1 is not showing correct total memory size with 64GB memory instal. [66809] Redfish API can't report correct DIMM installed with 64GB installed. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Install memory which size larger than 32GB then open web to check "Hardware Information" page. ======================================================================================== Filename: REDFISH_X10_322.bin version: 3.22 Date: 10-30-2015 Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD, X10DRD-L, X10SRH, X10SLH, X10SLE, X10DRH-I, X10DRG-O+-CPU 1. Category: Fix Description: [66681] [IPMI FW 3.20] IPMI Hardware Info Page Shown Wrong Memory Size with 64GB Memory Installed. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Installed memory which size over 32GB, then go to web to check "Hardware Information" page. 2. Category: Fix Description: [66674] RedFish is able to get token with http://. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Access redfish URI via HTTP and HTTPs to check. If you use HTTP, it should reply with error message. 2. Then go to web to check "http://${BMC_IP}", it should redirect to "https://${BMC_IP}" properly. 3. Category: Fix Description: [66464 ] Redfish_3.20: Boot order change for USB doesnot work it still boots to HDD. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. GET boot options in the redfish URI "/redfish/v1/Systems/1". 2. Then PATCH different options in the same URI with the data: { "Boot": { "BootSourceOverrideEnabled": ${RULE_YOU_CHOOSE}, "BootSourceOverrideTarget": ${OPTION_YOU_CHOOSE} } } 3. Reboot to BIOS setup page to check boot order. 4. Category: Fix Description: [66566 ] Redfish:3.21- [Get] redfish/v1/Managers/1/RADIUS feature does not display "RadiusServerIP". Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. GET redfish URI "/redfish/v1/Managers/1/RADIUS" to check the field "RadiusServerIP". 2. Or you can PATCH this field then GET it back again to see if it is modified or not. 5. Category: Fix Description: [66571 ] Redfish 3.21: redfish/v1/Managers/1/LDAP-> Patch operation allows invalid "LDAPPortNumber" value. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Patch wrong IP will receive error message 6. Category: Fix Description: [66631] [IPMI v3.20] IPMI Event Log Report Wrong Error DIMM Location. Impact motherboard: All X10 motherboards. Affected functions: Validation : 1.trigger Wrong Error DIMM Location. 2.Open event log web to check. 7. Category: Fix Description: [66568] Processor Automatically Throttled Event does not de-assert until after FAN fail events have all been de-asserted Impact motherboard: All X10 motherboards. Affected functions: Validation : 1. triggering fan fail and then CPU overheat event 2. lowering the CPU back down to non-overheat range to check whether cause the "Processor Automatically Throttled" event to de-assert. ======================================================================================== Filename: REDFISH_X10_321.bin version: 3.21 Date: 10-23-2015 Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD, X10DRD-L, X10SRH, X10SLH, X10SLE 1. Category: New implementation Description: NTP feature is added. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. 'GET' all managers under the URN "redfish/v1/Managers/1" to check if there is "NTP" in "oem" catagory. 2. Then 'GET' its URN path: "redfish/v1/Managers/1/NTP". 3. 'GET' / 'PATCH' are acceptable operations. 4. "NTPEnable", "PrimaryNTPServer", "SecondaryNTPServer", "DaylightSavingTime" can be 'PATCH' 2. Category: New implementation Description: LDAP feature is added. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. 'GET' all managers under the URN "redfish/v1/Managers/1" to check if there is "LDAP" in "oem" catagory. 2. Then 'GET' its URN path: "redfish/v1/Managers/1/LDAP". 3. 'GET' / 'PATCH' are acceptable operations. 4. "LDAPEnabled", "LDAPAuthOverSSL", "LDAPPortNumber", "LDAPServerIP", "LDAPPassword", "LDAPDN", "LDAPSearchbase" can be 'PATCH' 3. Category: New implementation Description: Radius feature is added. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. 'GET' all managers under the URN "redfish/v1/Managers/1" to check if there is "RADIUS" in "oem" catagory. 2. Then 'GET' its URN path: "redfish/v1/Managers/1/RADIUS". 3. 'GET' / 'PATCH' are acceptable operations. 4. RadiusEnabled", "RadiusServerIP", "RadiusPortNumber", "RadiusSecret" can be 'PATCH' ======================================================================================== Filename: REDFISH_X10_320.bin version: 3.20 Date: 10-16-2015 Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD, X10DRD-L, X10SRH, X10SLH, X10SLE 1. Category: Fix Description: [65106] [Redfish] System stop in "Factory Default" page and cannot back to Login page after press "Factory Default" button Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Try factory default and then wait for FW reboot. 2. Category: Fix Description: [66124] Redfish sensor name has extra characters Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.GET the URI: redfish/v1/Chassis/1/Thermal to check. 3. Category: Fix Description: [66274] [RedFish] Redfish 3.19 responses "200 OK" when we PATCH Account password with empty string Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Clear user "Password" as empty string then PATCH it under the URL: "https://${BMC_IP}/redfish/v1/AccountService/Accounts/%d" 4. Category: Fix Description: [65858] Redfish threshold values are not in the right order Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.connect to Chassis/1/Power to check max and min value in voltage. 5. Category: Fix Description: [66278] [RedFish] Redfish 3.19 /redfish/v1/Chassis/1/Power/ threshold values are in WRONG order Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.GET the URI: redfish/v1/Chassis/1/Power to check. 6. Category: Fix Description: [66088] Redfish voltage sensor reading exceeds MaxReadingRange Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.GET the URI: redfish/v1/Chassis/1/Power to check. 7. Category: Fix Description: [66270] [RedFish] /redfish/v1/Systems/1/Processors/ does not show any CPUs Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.GET the URI: /redfish/v1/Systems/1/Processors/ to check. ======================================================================================== Filename: REDFISH_X10_319.bin version: 3.19 Date: 10-02-2015 Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD, X10DRD-L, X10SRH, X10SLH 1. Category: Fix Description: [65765] Redfish_3.17: Post SessionService/Sessions/ will have unexcept status over session number limit Impact motherboard: All X10 motherboards in support list Affected functions: Validation : Continue POST SessionService/Sessions to session number limit is reached. 2. Category: Fix Description: [65950] Fixed MouseMode- shows "Unknown" mode as supported value issue. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Connect to /redfish/v1/Managers/1/MouseMode and check "Unknown" mode does not show as supported value. 3. Category: Fix Description: [65898] Redfish_3.18: "redfish/v1/Managers/1/ActiveDirectory/RoleGroups/" type error Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.connect to Managers/1/ActiveDirectory/RoleGroups/ to check odata.id 4. Category: Fix Description: [65627] Redfish_3.16: EventService action SubmitTestEvent EventType type error Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.connect to action SubmitTestEvent with error type and check http status code. 5. Category: Fix Description: [65858] Redfish threshold values are not in the right order Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.connect to Chassis/1/Power to check max and min value in voltage. 6. Category: Fix Description: [65798] Redfish_3.17 : System got 403 forbidden error on X10DDW-i. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.connect to /redfish/v1 to check whether can get data. 7. Category: Fix Description: The role - administrator can NOT change other users' password. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Logon as administrator to change other users' password. ======================================================================================== Filename: REDFISH_X10_318.bin version: 3.18 Date: 09-25-2015 Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD, X10DRD-L, X10SRH, X10SLH 1. Category: New implementation Description: Active Directory feature is added. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. 'GET' all managers under the URN "redfish/v1/Managers/1" to check if there is "ActiveDirectory" in "oem" catagory. 2. Then 'GET' its URN path: "redfish/v1/Managers/1/ActiveDirectory". 3. 'GET' / 'PATCH' are acceptable operations. 4. Then 'GET' its URN path: "redfish/v1/Managers/1/ActiveDirectory/RoleGroups". 5. 'GET' / 'POST'{"RoleGroupName":"xxx", "RoleGroupDomain":"xxx", "RoleGroupPrivilege":"Operator"} are acceptable operations. 6. Then 'GET' its URN path: "redfish/v1/Managers/1/ActiveDirectory/RoleGroups/[no]". 7. Then 'GET'/ 'PATCH'/ 'DELETE' are acceptable operations. 2. Category: New implementation Description: Get/Set iKVM mouse mode feature is added. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. 'GET' Mouse mode setting under "redfish/v1/Managers/1/MouseMode". 2. Then 'PATCH' to path: "redfish/v1/Managers/1/MouseMode" using {"Mode": "Relative"} or one of the modes. 3. 'GET' Mouse mode again, and mode is "Relative". 4. 'GET' / 'PATCH' are acceptable operations. 3. Category: New implementation Description: Reset to Factory Default feature is added. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. 'POST' to path : "redfish/v1/Managers/1/Actions/Oem/ManagerConfig.Reset". 2. 'POST' is the only acceptable operations. 4. Category: New implementation Description: Registries feature is added. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. 'GET' the main entry of Registries "redfish/v1/Registries". 2. 'GET' the URN path "/redfish/v1/Registries/Base.1.0.0" 5. Category:Fix Description: [65776] Redfish_3.17: Patching operation does not work as expected for /redfish/v1/Managers/1/EthernetInterfaces/1/VLAN Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. patch {"VLAN": {"VLANEnable": true, "VLANId": 2}} 6 Category:Fix Description: [65627] Redfish_3.16: EventService action SubmitTestEvent EventType type error Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. 'POST' to path : redfish/v1/EventService/Actions/EventService.SendTestEvent with {"EventType":"Alert"} ======================================================================================== Filename: REDFISH_X10_317.bin version: 3.17 Date: 09-22-2015 Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD, X10DRD-L, X10SRH 1. Category:Fix Description: [65306] Redfish_3.15: EventService subscriptions have typo. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Goto EventService/Subscriptions/%d URI then check. 2. Category: Fix Description: [65118] Redfish_3.14: Patching operation does not work as expected for /redfish/v1/Managers/1/EthernetInterfaces/1 Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. patch {"AutoNeg": true, "FullDuplex": true} to see the result. 2. patch {"VLAN": {"VLANEnable": true}} will get error message 3. Category: Fix Description: [65396] [Redfish 3.15]: redfish/v1/Managers/1/LogServices/Log1/Entries - shows incorrect format under "Message:" Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Read https://xxx.xxx.xxx.xxx/redfish/v1/Managers/1/LogServices/Log1/Entries/XX 2. Check Message to see the sensor name in [], if there's no snesor name, "[]" will be removed. 4. Category: Fix Description: [65390] [redfish v3.15] "SenderAddress" string won't show in IPMIWeb GUI while PATCH "SMTP" server data thru API Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. read https://xx.xx.xx.xx/redfish/v1/Managers/1/SMTP to PATCH and GET data 2. check "SenderAddress" whether match with web gui. 5. Category: Fix Description [65557][MB: X10DRT-P] Redfish Fw-3.16: "redfish/v1/Chassis/1/Power" doesn't display any voltages if you update fw with factory default Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.connect to redfish/v1/Chassis/1/Power to check voltages. 6. Category: Fix Description:[65625] Redfish v3.16 : System processors have same Id. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.get data from https://xx.xx.xx.xx/redfish/v1/Systems/1/Processors/[num] 2.check [num] with Id whether it's match each. 7. Category: Fix Description:[65565][redfish v3.16] SMTP Server is not working if PATCH server information thru /redfish/v1/Managers/SMTP/ . It won't accept email alert. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.Do PATCH method on SMTP, then go to web and try sendtestmail or produce event to send email. ======================================================================================== Filename: REDFISH_X10_316.bin version: 3.16 Date: 09-16-2015 Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD, X10DRD-L, X10SRH 1. Category: New implementation Description: Privileged users ("ReadOnlyUser" is NOT included) can only modify theirselves password. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Create 2 accounts with different privileges(one for "RoldId - Admin" and another is "RoleId - Operator"), For example, User 1 name: "supermicro" with "Admin" privilege User 2 name: "dell" with "Operator" privilege 2. Login with the users "supermicro" and "dell" respectively then modify the passwords of its own and others. 3. The results should be - only "supermicro" can modify the paswword of itself and can not modify the password of "dell". On the other hand - only "dell" can modify itself password. 4. Notice! Those users with privilege "ReadOnlyUser" can not modify its password, of course, even "Admin" still can NOT modify it. 2. Category: Fix Description: [65390] [redfish v3.15] "SenderAddress" string won't show in IPMIWeb GUI while PATCH "SMTP" server data thru API Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Do modification on SMTP sender address then GET it back to check. 3. Category: Fix Description: [65294] [redfish v3.15] SmtpServer won't accept "ip-address" when PATCH /redfish/v1/Managers/SMTP/. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Modify the field, "SmtpServer", with IP-formated string then check its repsonse. 4. Category: Fix Description: [65306] Redfish_3.15: EventService subscriptions have typo. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Goto EventService/Subscriptions/%d URI then check. 5. Category: Fix Description: [65262] [redfish v3.15] won't able change fanmode to "FullSpeed" mode via redfish API / Advanced Reset Client Application Impact motherboard: All X10 motherboards in support list Affected functions: Set fan speed to "FullSpeed" fail Validation : 1. Set fan speed to "FullSpeed" then check its RPM. 6. Category: Fix Description: [65468] POSTMAN got junk character Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Read https://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Power 2. Check Powersupplies -> "Model", "FirmwareVersion", "SerialNumber" 7. Category: Fix Description: [65396] [Redfish 3.15]: redfish/v1/Managers/1/LogServices/Log1/Entries - shows incorrect format under "Message:" Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Read https://xxx.xxx.xxx.xxx/redfish/v1/Managers/1/LogServices/Log1/Entries/XX 2. Check Message to see the sensor name in [] 8. Category: Fix Description: [65118] Redfish_3.14: Patching operation does not work as expected for /redfish/v1/Managers/1/EthernetInterfaces/1 Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. patch "AutoNeg","FullDuplex","VLAN" to see the result. 9. Category: Fix Description: [65107] [Redfish] BIOS Update function descripe show "Undifined" when IPMI web language set to "Chinese" Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. De-activate the key. 2. Check the BIOS update page. ======================================================================================== Filename: REDFISH_X10_315.bin version: 3.15 Date: 09-02-2015 Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD, X10DRD-L, X10SRH 1. Category: New implementation Description: SMTP feature is added. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. 'GET' all managers under the URN "redfish/v1/Managers/1" to check if there is "SMTP" in "oem" catagory. 2. Then 'GET' its URN path: "redfish/v1/Managers/1/SMTP". 3. 'GET' / 'PATCH' are acceptable operations. 2. Category: fix Description: [65118] Redfish_3.14: Patching operation does not work as expected for /redfish/v1/Managers/1/EthernetInterfaces/1 Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. PATCH hostname under the URN path: "/redfish/v1/Managers/1/EthernetInterfaces/1". 2. 'GET' the same URN for hostname's change. 3. Category: fix Description: [65064] Incorrect PS sensor items in Redfish 3.14 Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Check status https://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Power ======================================================================================== Filename: REDFISH_X10_314.bin version: 3.14 Date: 08-27-2015 Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD, X10DRD-L, X10SRH 1. Category: fix Description: Remove debug message against Systems/1 Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.verify Systems/1 with LSI enabled. 2. Category: enhancement Description: Present all EthernetInterface members against Systems/1/EthernetInterfaces Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.verify Systems/1/EthernetInterfaces and its child path. 3. Category: fix Description: [65010] Redfish API doens't push event to webserver Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.Do factory default 2.Create an event sbuscription with destination point to the webserver 3.Remove platform FAN to generate an event. 4.Check with your webserver's reaction. ======================================================================================== Filename: REDFISH_X10_313.bin version: 3.13 Date: 08-26-2015 Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD, X10DRD-L, X10SRH 1. Category: fix Description: [64881] [Redfish FW 3.12] Fail To Use Active Directory To Log In Redfish?? API. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.use AD account to login redfish service. 2. Category: New Description: X10SRH support redfish service. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 3. Category: Fix Description: [64832] Missing MB_10G Temp in IPMI Web GUI with REDFISH 3.12. Impact motherboard: X10DRU-i+, X10DRU-X(LL) Affected functions: Validation : 1. After updating FW, power cycle the SUT. 2. Check the MB_10G Temp1 and Temp2 value. 4. Category: fix Description: [64840][IPMI_3.12]API Status report error Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. when pws fail, check status https://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Power 2. also check overall status https://xxx.xxx.xxx.xxx/redfish/v1/Systems/1 5. Category: fix Description: [64873][v3.12] will not allow save/mount virtual media drive Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1. Allow "\" character in path, \XXX\YYY.iso could be save and mount. ======================================================================================== Filename: REDFISH_X10_312.bin version: 3.12 Date: 08-22-2015 Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRT-HIBF, X10DRFR-T, X10DRD, X10DRD-L 1. Category: fix Description: [64571] Inconsistent Fan Fail Behavior between IPMI and Redfish Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.Disconnecting a system fan while system is online triggers Fan Failure Alert in IPMI. 2.https://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Thermal 3.to see status and health of Fan sensor. 2. Category: fix Description: Voltage sensor is absent but redfish show status OK. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.https://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Power 3.Check voltage sensor status. 3. Category: fix Description: Session Audit and AC Power On event log can't show message in log service. Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.Generate Session Audit and AC Power On event. 2.https://xxx.xxx.xxx.xxx/redfish/v1/Managers/1/LogServices/Log1/Entries/ 3.Check event entries to see the message. 4. Category: fix Description: [64644][IPMI_3.11] HTTPS always pops out the first time after flash Impact motherboard: All X10 motherboards in support list Affected functions: Validation : 1.check if SSL redirection is enable on ipmi web. ======================================================================================== Filename: REDFISH_X10_311.bin version: 3.11 Date: 08-14-2015 Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD, X10DRD-L 1. Category: fix Description: [64504] Redfish IPMI FW 3.10: Redfish responses "200 OK" if we PATCH Accounts Password with empty string Impact motherboard: Affected functions: Validation : 1. https://xxx.xxx.xxx.xxx/redfish/v1/AccountService/Accounts/3/ 2. [patch] {"UserName":"opera123", "Password":"","RoleId":"Admin"} 3. Password length should be great than 8. 2. Category: fix Description: [64324] Redfish 1.03: Event subscription doesnot display correct error message after creating max number of subscription Impact motherboard: Affected functions: Validation : Step1: try to create 16 subscriptions. status code should be 403. 3. Category: fix Description: [64439] Redfish IPMI FW 3.10: After upgrading fw with factory default restored, previous event subscriptions remains present. Impact motherboard: Affected functions: Validation : 1. do factory default 2. check https://xxx.xxx.xxx.xxx/redfish/v1/EventService/Subscriptions/ 4. Category: fix Description: [64441] Redfish IPMI FW 3.10: Redfish responses "200 OK" if we POST ComputerSystem reset operation without parsing payload. Impact motherboard: Affected functions: Validation : 1.[POST] https://xxx.xxx.xxx.xxx/redfish/v1/Systems/1/Actions/ComputerSystem.Reset without payload data. 2.will return status cod 400 and error message. 5. Category: fix Description: [64505] Redfish 1.03: HTTP response 200 on PATCH Accounts RoleId with unknow type Impact motherboard: Affected functions: Validation : 1. https://xxx.xxx.xxx.xxx/redfish/v1/AccountService/Accounts/3/ 2. [patch] {"UserName":"opera123","RoleId":"123"} 3. will return error code and error message. 6. Category: fix Description: [64506] Redfish 1.03: Account Collections miss Account after PATCH Account RoldId with unknow type Impact motherboard: Affected functions: Validation : 1. https://xxx.xxx.xxx.xxx/redfish/v1/AccountService/Accounts/3/ 2. [patch] {"UserName":"opera123","RoleId":"123"} 3. will return error code and error message. 7. Category: fix Description: [64465] [Redfish] Sensor readings missing in IPMI3.10 Impact Motherboard: MBD-X10DRU-I+-P Affected functions: Validation : 1. https://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Power 8. Category: fix Description: [64535] Redfish Managers/1/SerialInterface/1 InterfaceEnabled not available Impact motherboard: Affected functions: Validation : 1. https://xxx.xxx.xxx.xxx/redfish/v1/Managers/1/SerialInterface/1 9. Category: fix Description: [64556] Redfish /redfish/v1/Systems/1/Processors/2 and /redfish/v1/Systems/1/Processors/1 were swapped Impact motherboard: Affected functions: Validation : 1. https://xxx.xxx.xxx.xxx/redfish/v1/Systems/1/Processors 10. Category: fix Description: SerialNumber and PartNumber of /redfish/v1/Systems/1 are from FRU0 Impact motherboard: Affected functions: Validation : 1. https://xxx.xxx.xxx.xxx/redfish/v1/Systems/1 ======================================================================================== Filename: REDFISH_X10_310.bin version: 3.10 Date: 08-07-2015 1. Category: fix Description: fix the mismtach for odata.type field Impact Motherboard: X10 motherboards Affected functions: Validation : 1. please use PostMan to verify. 2. Category: fix Description: fix the wrong for odata.context url Impact Motherboard: X10 motherboards Affected functions: Validation : 1. please use PostMan to verify. 3. Category: fix Description: [62000] PWS serial number does not match when run http://172.31.41.45/redfish/v1/Chassis/1/Power this command Impact Motherboard: X10 motherboards Affected functions: Validation : 1. http://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Power 2. Check PowerSupplies -> SerialNumber 4. Category: fix Description: [62003] Some sensor readings are showing wrong when run http://172.31.41.45/redfish/v1/Chassis/1/Thermal command Impact motherboard: X10DRI Affected functions: Validation : 1. http://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Thermal 2. Check "PCH Temp" -> "Status" -> "Health" 5. Category: fix Description: [62005] Fans sernsor reading show wrong readings when Fans are not plugged in with command http://172.31.41.45/redfish/v1/Chassis/1/Thermal Impact motherboard: X10DRI Affected functions: Validation : 1. http://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Thermal 2. Check "FAN" -> "Status" -> "Health" 6. Category: fix Description: [62714] Log service entries have no detail & time stamp do not match with IPMI SEL when run "http://172.16.140.218/redfish/v1/Managers/1/LogServices/Log1/Entries/2" command Impact motherboard: Affected functions: Validation : 1. check how many event log in BMC. 2. Check event entries"http://xxx.xxx.xxx.xxx/redfish/v1/Managers/1/LogServices/Log1/Entries/ 7. Category: fix Description: [63641] Incorrect data type found on Redfish, using firmware version 1.0.2 Impact motherboard: Affected functions: Validation : 1. http://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Thermal to check "SensorNumber" data type: Integer 8. Category: fix Description: [63946] redfish/v1/Chassis/1/Thermal: DIMM MIN/MAX Voltage values are not defined properly Impact motherboard: Affected functions: Validation : 1. http://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Thermal to check DIMM MIN/MAX values 8. Category: fix Description: [64167] Redfish_FW 1.03: Event Subscription does not accept "ResourceRemoved" added inside ??Event Type?? Impact motherboard: Affected functions: Validation : Step1: Posting subscription->got 201 created [Post]http://IP/redfish/v1/EventService/Subscriptions/ {"Destination":"http://www.dnsname.com/Destination1","Context":"user1_test","EventTypes":["Alert","StatusChange", "ResourceRemoved"],"Protocol":"Redfish"} Step2: Validating Subscription:http://IP/redfish/v1/EventService/Subscriptions/ 9. Category: fix Description: [64324] Redfish 1.03: Event subscription doesnot display correct error message after creating max number of subscription Impact motherboard: Affected functions: Validation : Step1: try to create 16 subscriptions ======================================================================================== Filename: REDFISH_X10_103.bin version: 1.03 Date: 07-27-2015 1. Category: New implementation Description: enable Https by default. Note:please do the reset-to-default Impact Motherboard: X10 motherboards Affected functions: Validation : 1. please use PostMan to verify. 2. Category: New implementation Description: Support NvME and LSI under Systems/1/SimpleStorage/ Note: LSI is restricted to LSI 3108 series Impact Motherboard: For motherboards which can support Broadcom 3108 sensor readings. For motherboards which can support NVMe web page detections. Affected functions: Validation : 1. MUST have NvME SSD or LSI storage card populated in the system. 2. please use PostMan to verify. 3. Category: Fix Description: fix the odata.context_url in some resources Impact Motherboard: X10 motherboards Affected functions: Validation : please use PostMan to verify. 4. Category: New implementation Description: Support Fan Mode under /redfish/v1/Chassis/1 Impact Motherboard: X10 motherboards Affected functions: Validation : please use PostMan to verify. 5. Category: New implementation Description: Support EventService and send out alert through redfish. Impact Motherboard: X10 motherboards Affected functions: Validation : please use PostMan to verify. ======================================================================================== Filename: REDFISH_X10_102.bin version: 1.02 Date: 06-018-2015 1. Category: New implementation Description: Support to create, update and delete resource which is listed as below through redfish. It is supposed to be consistent with IPMI web. /redfish/v1/Systems/1 update: Boot BootSourceOverrideEnabled BootSourceOverrideTarget IndicatorLED /redfish/v1/Managers/1 update : DateTime (Note: value is changed when ntp is disabled) DateTimeLocalOffset (Note: value is changed when ntp is enabled) /redfish/v1/Managers/1/NetworkProtocol/ update : HTTP Enabled Port HTTPS Enabled Port IPMI Enabled Port KVMIP Enabled Port SNMP Enabled Port SSH Enabled Port VirtualMedia (Note: When KVMIP is disabled, VirtualMedia will get disabled together) Enabled Port /Managers/1/SerialInterfaces/1/ update : BitRate, FlowControl /Managers/1/EthernetInterfaces/1/ update : AutoNeg, FullDuplex, SpeedMbps, HostName, VLAN{ VLANEnable, VLANId}, IPv4Addresses{ AddressOrigin, Address, SubnetMask, Gateway}, NameServers /AccountService/Account UserName Password and RoleId are required to create users. /AccountService/Account/[num] delete users and update user. /SesssionService/ update :SessionTimeout Chassis/1/ update: AssetTag ======================================================================================== Filename: REDFISH_X10_101.bin version: 1.01 Date: 06-01-2015 1. Category: New implementation Description: Support the below new RedFish APIs and redfish authentication following "Redfish Scalable Platforms Management API Specification" Be noted that please do reset-to-default and take new settings into effect. Impact Motherboard: X10 motherboards Affected functions: Validation : please use PostMan to verify. /redfish/v1/Managers/1/LogServices/ /redfish/v1/Managers/1/LogServices/Log1/ /redfish/v1/Managers/1/LogServices/Log1/Entries /redfish/v1/Managers/1/LogServices/Log1/Entries/[num] /redfish/v1/SessionService/ /redfish/v1/SessionService/Sessions/ /redfish/v1/SessionService/Sessions/[num] /redfish/v1/Systems /redfish/v1/Systems/1 /redfish/v1/Systems/1/Processors/[num] /redfish/v1/Systems/1/EthernetInterfaces/[num] (MUST install TAS) /redfish/v1/Managers/1/LogServices/Log1/Actions/LogService.Reset /redfish/v1/Managers/1/Actions/Manager.Reset /redfish/v1/Systems/1/Actions/ComputerSystem.Reset 2. Category: Fix Description: fix the issues under the below urls. /redfish/v1/Chassis/1 /redfish/v1/Chassis/1/Power/Voltages/1 /redfish/v1/Managers/1/ /redfish/v1/Managers/1/SerialInterfaces /redfish/v1/Managers/1/EthernetInterfaces Impact Motherboard: X10 motherboards Affected functions: Validation : 3. Category: Fix Description: fix the typo on IPMI web. Impact Motherboard: X10 motherboards Affected functions: Validation : ======================================================================================== Filename: REDFISH_X10_100.bin version: 1.00 Date: 04-29-2015 1. Category: New implementation Description: Support the below RedFish APIs. Be noted that please do reset-to-default and take new settings into effect. Impact Motherboard: X10 motherboards Affected functions: Validation : Please install JsonViewer and PostMan plugins in the browser, chrome or Firefox. /redfish/v1/ /redfish/v1/$metadata /redfish/v1/Chassis /redfish/v1/Chassis/1 /redfish/v1/Chassis/1/Thermal /redfish/v1/Chassis/1/Power /redfish/v1/Managers /redfish/v1/Managers/1 /redfish/v1/Managers/1/NetworkProtocol /redfish/v1/Managers/1/EthernetInterfaces /redfish/v1/Managers/1/EthernetInterfaces/1 /redfish/v1/Managers/1/SerialInterfaces /redfish/v1/Managers/1/SerialInterfaces/1 /redfish/v1/AccountService /redfish/v1/AccountService/Accounts/ /redfish/v1/AccountService/Accounts/[num] /redfish/v1/AccountService/Roles /redfish/v1/AccountService/Roles/Admin /redfish/v1/AccountService/Roles/Operator /redfish/v1/AccountService/Roles/ReadOnlyUser