/**/ Hit any key to continue! /**/ ^rGeneral error in lowlevel^r /**/ ^rLL02^r /**/ ^rLL03^r /**/ ^rLL04^r /**/ ^rLL05^r /**/ ^rLL06^r /**/ ^rLL07^r /**/ ^rLL08^r /**/ ^rLL09^r /**/ ^rFile not found^r /**/ ^rCORE EEPROM too small^r /**/ ^rCOPE EEPROM too small^r /**/ ^rS4-checksum wrong^r /**/ ^rS0-missing^r /**/ ^rS9-missing^r /**/ ^rS1 checksum error^r /**/ ^rUndefined symbol in menu^r /**/ ^rRadio & pc file incompatible^r /**/ ^rLL19^r /**/ ^rLL20^r /**/ ^rLL21^r /**/ ^rLL22^r /**/ ^rLL23^r /**/ ^rLL24^r /**/ ^rLL25^r /**/ ^rLL26^r /**/ ^rLL27^r /**/ ^rLL28^r /**/ ^rLL29^r /**/ ^rLL30^r /**/ ^rByte already used^r /**/ ^rUnknown patch ID^r /**/ ^rUnknown CORE ID^r /**/ ^rUnknown COPE ID^r /**/ ^rUnknown TYPE ID^r /**/ ^rFilled in value already used^r /**/ /* Text 37: ILLEGAL_USE_OF_POINTER try to use a pointer wich should not be used indicates a bad pc-file */ ^rIllegal use of pointer^r /**/ ^rNo S1-record^r /**/ ^rNo S2-record^r /**/ ^rNo S3-record^r /**/ ^rWrong pass: CORE = %X ^r /**/ ^rWrong pass: COPE = %X ^r /**/ ^rLL43^r /**/ ^rLL44^r /**/ ^rLL45^r /**/ ^rLL46^r /**/ ^rLL47^r /**/ ^rLL48^r /**/ ^rLL49^r /**/ ^rProgramming 5T not allowed^r /**/ ^rCORE not responding^r /**/ ^rCOPE not responding^r /**/ ^rLL53^r /**/ ^rImproper file open^r /**/ ^rCORE Checksum wrong^r /**/ ^rCOPE int Checksum wrong^r /**/ ^rCOPE ext Checksum wrong^r /**/ ^rCORE not erased^r /**/ ^rLL59^r /**/ ^rRadio not responding^r /**/ ^rRadio not connected^r /**/ ^rRIB not responding^r /**/ ^rMissing cable link or radio is OFF^r /**/ ^rCable not connected to IBM-PC^r /**/ ^rLL65^r /**/ ^rLL66^r /**/ ^rLL67^r /**/ ^rLL68^r /**/ ^rLL69^r /**/ ^rLL70^r /**/ ^rPlease turn radio OFF and ON^r /**/ ^rLL72^r /**/ ^rLL73^r /**/ ^rPC FILE I/O ERROR ! -TXT files missing^r /**/ ^rLL75^r /**/ ^rSERIAL BUS I/O check connection^r /**/ ^rLL77^r /**/ ^rLL78^r /**/ ^rFATAL ERROR^r /**/ ^rA FATAL ERROR ^r /**/ /* Text 81: FREQUENCY being processed was not divisible by eihter 5.0 KHz or 6.25 KHz therefore, the FREQUENCY will forced to be divisible by 6.25 KHz. This is only a WARNING. calc_ab.c */ ^rRF freq. not divisible by 5/6.25 kHz.^r /**/ ^rLL82^r /**/ ^rLL83^r /**/ ^rLL84^r /**/ ^rFile not found^r /**/ ^rLL86^r /**/ ^rLL87^r /**/ ^rLL88^r /**/ ^rLL89^r /**/ ^rLL90^r /**/ ^rLL91^r /**/ ^rA CHECKSUM ERROR was detected^r /**/ ^rA CHECKSUM ERROR in COPE internal^r /**/ ^rA CHECKSUM ERROR in COPE external^r /**/ ^rLL95^r /**/ ^rLL96^r /**/ ^rLL97^r /**/ ^rLL98^r /**/ ^rLL99^r /**/ ^rLL100^r /**/ ^rLL101^r /**/ ^rLL102^r /**/ ^rNot enough external EEPROM^r /**/ ^rLL104^r /**/ ^rRadio is incompatible with pc-file^r /**/ ^rwrong MODE in AUTOCALL-STUFF^r /**/ ^rError in Table Order in Pass 1 ^r /**/ ^rError in Table Order in Pass 2^r /**/ ^rSEQ def_pnt conflict with pnt_l^r /**/ ^rwrong MODE in STUFF^r /**/ ^rwrong MODE in find_sequ ^r /**/ ^rChannel data may be wrong ^r /**/ ^rLL113^r /**/ ^rLL114^r /**/ ^rLL115^r /**/ ^rLL116^r /**/ ^rLL117^r /**/ ^rLL118^r /**/ ^rLL119^r /**/ ^rLL120^r /**/ ^rLL121^r /**/ ^rLL122^r /**/ ^rLL123^r /**/ ^rLL124^r /**/ ^rLL125^r /**/ ^rLL126^r /**/ ^rLL127^r /**/ ^rOverwrite serial-no in radio (Y/N)^r /**/ ^rMX2000 -- MX3000 inconsistency.^r ^rOverwrite Model ? (Y/N) ^r /**/ ^rMX1000 -- MX2000/3000 inconsistency^r ^rOverwrite Model ? (Y/N) ^r /**/ ^rTX power amplifier inconsistency.^r ^rOverwrite data ? (Y/N) ^r /**/ ^rFrequency band incompatible. ^r ^rOverwrite frequency band ? (Y/N)^r /**/ ^rRadio model inconsistency. ^r ^rOverwrite model ? (Y/N) ^r /**/ ^rUnknown APC code. ^r ^rOverwrite radio ? (Y/N)^r /**/ ^rRadio & pc-file don't match.^r /**/ ^rTurn radio off and on before tuning.^r /**/ ^rProgram radio after tuning.^r /**/ ^rRadio programmed successfully.^r /**/ ^rRadio read successfully.^r /**/ ^rLL140^r /**/