/**/
 ^r Do you really want to leave the ^r
 ^r programmer (Y/N)?               ^r
/**/
 Press any key to continue.
/**/
 ^r OK that SAVE will overwrite existing ^r
 ^r file (Y/N)?                          ^r
/**/
 ^r More files (Y/N)? ^r
/**/
 ^r This operation will destroy  ^r
 ^r current codeplug data (Y/N)? ^r
/**/
 ^r Select 5 tone encoder options   ^r
 ^r will be lost.                   ^r
 ^r Do you wish to continue?  (Y/N) ^r
/**/
 ^r Select 5 tone decoder options   ^r
 ^r will be lost.                   ^r
 ^r Do you wish to continue?  (Y/N) ^r
/**/
 ^r Select 5 tone encoder/decoder   ^r
 ^r options will be lost.           ^r
 ^r Do you wish to continue?  (Y/N) ^r
/**/
 ^r Zone information will be lost.  ^r
 ^r Do you wish to continue?  (Y/N) ^r
/**/
 ^r Channel information may be lost. ^r
 ^r Do you wish to continue?  (Y/N)  ^r
/**/
 Enter Multicall code (1 to 7 digits).
 Valid data: 0-9,G,R,J,K,L,M.
/**/
 Enter Multicall display.
 Max. 8 alphanumeric characters.
/**/
 Enter Single Tone frequency. Range:
 300-3000 Hz
/**/
 Enter Single Tone duration. Range:
 40-9999 ms (40-9900 ms for STIC form)
/**/
 
/**/
 
/**/
 Enter scan list number.
/**/
 Enter RF power level.
 low=0, medium=1, high=2, special=3
/**/
 Do not enter any data here.
/**/
 Enter max. 3 alphanumeric characters.
/**/
 Enter max. 5 alphanumeric characters.
/**/
 Enter max. 8 alphanumeric characters.
/**/
 Enter PL frequency (50.0 - 300.0 Hz).
 Codes are found on Help screen for PL.
/**/
 Enter RF frequency (146 - 162 MHz).
/**/
 Enter RF frequency (157 - 174 MHz).
/**/
 Enter RF frequency (146 - 174 MHz).
/**/
 Enter RF frequency (403 - 433 MHz).
/**/
 Enter RF frequency (440 - 470 MHz).
/**/
 Use CHANNEL FREQUENCY TABLE to edit
 this option.
/**/
 ^r Option not programmed yet. ^r
/**/
 
/**/
 Use "Select Key" [F2] to
 enable this option.
/**/
 
/**/
 
/**/
 Use [ENTER] to display table data.
/**/
/* Text 35:  INST_TABLES
 Use [TAB], [SHIFT TAB] to select table
 and [ENTER] to display table data.
/**/
 Use CONFIGURATION to edit this option.
/**/
 Enter Pretime value. "0" to disable.
 0-1135 (0-1000 ms for STIC form).
/**/
 Enter Transmit Time-Out-Timer value.
 0-288 sec (0-255 sec for STIC form).
/**/
 Enter T.O.T. Rekey duration value.
 0-288 sec (0-30 sec for STIC form).
/**/
 Enter Auto Reset time value.
 0-288 sec (0-60 sec for STIC form).
/**/
 Enter Extended First tone duration.
 40-1500 ms (100-1500 ms for STIC form).
/**/
 Enter System Access code (1-16 digits)
 Valid data: 0-9, #, *, P = pause
/**/
 Enter Hang Up code (1-16 digits)
 Valid data: 0-9, #, *, P = pause
/**/
 Enter Decoder code (1 to 7 digits).
 Valid data: 0-9,G,R.
/**/
 Enter Call code (1 to 7 digits).
 Valid data: 0-9,G,R,J,K,L,M.
/**/
 Define the Group level with "X" and
 all other positions with " " or "_".
/**/
 Define the Group Call type digit.
 Allowed data: 0-9,G.
/**/
 Use CHANNEL ASSIGNMENT TABLE to edit
 this option.
/**/
 Use "Select Key" [F2] to
 disable this option.
/**/
 To change this option, select one out
 of the mutually exclusive block.
/**/
 Use "Select Key" [F2] to disable this
 option,[ENTER] to display table data.
/**/
 Enter Unit ID code ( 1 to 7 digits ).
 Valid data: 0-9,G,R,J,K,L,M.
/**/
 Adjust values (+ , -) in RX mode only
 and press PTT to verify setting.
/**/
 Use "Select Key" [F2] to select
 1 ... 2/2.5 Watt TX power range.
/**/
 Use "Select Key" [F2] to select
 0.1 ... 1 Watt TX power range.
/**/
 Adjust values with (+ , -) keys.
/**/
 Define the variable position with "X"
 (2 "X" max). " " or "_" for fixed pos.
/**/
 Define the variable position with "X"
 (5 "X" max). " " or "_" for fixed pos.
/**/
 Enter Multicall range.
 Valid data: 0-9,G.
/**/
 Enter RAT code (1 to 7 digits).
 Valid data: 0-9,G,R,J,K,L,M.
/**/
 Enter Shortcall zone number.
/**/
 Enter Shortcall channel number.
/**/
 Enter Shortcall code (1 to 7 digits).
 Valid data: 0-9,G,R,J,K,L,M.
/**/
 Enter Shortcall display.
 Max. 8 alphanumeric characters.
/**/
 Enter Emerg. ID code (1 to 7 digits).
 Valid data: 0-9,G,R,J,K,L,M.
/**/
 Enter Reset code (1 to 7 digits).
 Valid data: 0-9,G,R.
/**/
 Enter Emergency Single tone (J,K,L,M).
 Refer to H742 Single Tone table.
/**/
 Enter Emergency transmit duration.
 Duration: 5 - 255 sec.
/**/
 Enter Emergency receive duration.
 Duration: 5 - 255 sec.
/**/
 Enter Emergency code (1 to 7 digits).
 Valid data: 0-9,G,R,J,K,L,M.
/**/
 Enter Emergency channel number.
/**/
 Enter Emergency zone number.
/**/
 Enter ^rone^r lockout digit. Valid data:
 0-9, " " or "_" for other positions.
/**/
 Enter Reset tone frequency.
 800-3000 Hz
/**/
 Enter Reset tone duration.
 98-560 ms (100-560 ms for STIC)
/**/
 Enter Acknowledge code (1 to 7 digits)
 Valid data: 0-9,G,R,J,K,L,M.
/**/
 Define the Variable Positions with "X"
 (2 "X" max). " " or "_" for fixed pos.
/**/
 Enter Acknowledge channel number.
/**/
 Enter Acknowledge zone number.
/**/
 Define the Group level with "X" and
 all other positions with " " or "_".
/**/
 Define the Group Call Type digit.
 Allowed data: 0 - 9, G 
/**/
 Enter Group Lock Out digit.
 Valid Data: 0 - 9, G
/**/
 Enter Non Standard Repeat tone
 Valid Data: 0 - 9
/**/
 ^r Data in Radio will be overwritten! ^r
 ^r Do you wish to continue?  (Y/N)    ^r
/**/
^r This action will override all current ^r
^r data. Do you wish to continue? (Y/N)  ^r
/**/
 Enter All Call frequency
 Range:  300-3000 Hz
/**/
 Enter text to be found :
/**/
 Insert Help Disk in Drive 
/**/
 Hit any key to continue !
/**/
^r This action will override all current ^r
^r data. Do you wish to continue? (Y/N)  ^r
/**/
 Enter Password.
 Valid data: 0 - 9, #, *
/**/
 ^r Do you want to extract tuning data ^r
 ^r out of radio?  (Y/N)               ^r
/**/
 Insert ^h SYSTEM DISK ^h in Drive 
/**/
/* Used from oinch643, oinch368, oinch369, 
 ^r This operation will destroy ^r
 ^r user defined data  (Y/N)?   ^r
/**/
 Enter PL frequency (50.0 - 300.0 Hz).
/**/
 Enter Selectable PL display.
 Max. 8 alphanumeric characters.
/**/
 Enter Trakmode number (1-32).
/**/
 Channel does not exist.
 Do not enter any data here.
/**/
 Enter "X" to disable or " " to enable
 Transmit Time-Out-Timer.
/**/
 Enter "X" to disable or " " to enable
 Authorisation.
/**/
 Enter "X" to disable or " " to enable
 Manual and Automatic RAT.
/**/
 Enter "X" to disable or " " to enable
 Extended First Tone on Encode.
/**/
 Enter "X" to disable or " " to enable
 Flat Audio Response.
/**/
 Enter Pretime value. "0" to disable.
 0-1135 (0-1000 ms for sticform).
/**/
 Enter RAT code (1 to 7 digits).
 Valid data: 0-9,G,R,J,K,L,M.
/**/
 Define the variable position with "X"
 (5 "X" max). " " or "_" for fixed pos.
/**/
 Enter Call code (1 to 7 digits).
 Valid data: 0-9,G,R,J,K,L,M.
/**/
 Define the variable position with "X"
 (5 "X" max). " " or "_" for fixed pos.
/**/
 Enter "X" to disable or " " to enable
 Multicall.
/**/
 Enter Unit ID code ( 1 to 7 digits ).
 Valid data: 0-9,G,R,J,K,L,M.
/**/
 Enter Decoder code (1 to 7 digits).
 Valid data: 0-9,G,R.
/**/
 Define the group level with "X" and
 all other positions with " " or "_".
/**/
 Enter Acknowledge code (1 to 7 digits)
 Valid data: 0-9,G,R,J,K,L,M.
/**/
 ^r Trakmode data will be lost.     ^r
 ^r Do you wish to continue?  (Y/N) ^r
/**/
 Enter scan list number (1-10).
/**/
 Enter Scan Zone number.
/**/
 Enter Scan Channel number.
/**/
 Enter Designated TX Zone number.
/**/
 Enter Designated TX Channel number.
/**/
 ^r Unused user defined Scan Lists exist.^r
 ^r Scan List data will be lost.         ^r
 ^r Do you wish to continue?  (Y/N)      ^r
/**/
 ^r H923 Emergency on progr. channel ^r
 ^r will be enabled automatically.   ^r
 ^r Do you wish to continue?  (Y/N)  ^r
/**/
 ^r Channel frequency data will be lost. ^r
 ^r Do you wish to continue?  (Y/N)      ^r
/**/
 Enter RF frequency (66 - 80 MHz).
/**/
 Enter RF frequency (74 - 88 MHz).
/**/
Number-format: DDDaaaDDDD   
D = digit, a = alpha
/**/
 Use H344 Channel Slaved Scan List
 to edit this option.
/**/
 Enter Transmit Response Time.
 Valid data : 1 - 60 sec.
/**/
 Enter Receive Response Time.
 Valid data : 1 - 60 sec.
/**/
 This option requires a scan function
 in the radio (H273, H344).
/**/
 Enter side tone volume (0 - 255).
/**/
 Enter minimum volume level (0 - 255).
/**/
 Enter Emergency switch debounce time
 (9 - 1135 ms).
/**/
 Enter Auto Acknowledge delay time
 (9 - 1135 ms).
/**/
 Use CHANNEL ASSIGNMENT TABLE to edit
 this option or [F2] to disable.
/**/
 Enter 0 to disable and
 1 to enable PTT Monitor.
/**/
 Enter directory pathname and press
 [ENTER] to display the directory.
/**/
 Enter PC file name and press [ENTER]
 to load the PC file.
/**/
 Enter PC file name and press [ENTER]
 to save the PC file.
/**/
 ^r Press SHIFT for other functions.    ^r
/**/
 ^r Channel data and channel references  ^r
 ^r will be lost. A list of affected     ^r
 ^r options is available on help screen. ^r
 ^r Do you wish to continue?  (Y/N)      ^r
/**/
 Load PC file, Read Radio or use
 Hardware Configuration for Setup.
/**/
^r Codeplug size check completed ^r
/**/