================================================================
Professional Radio - Customer Programming Software R01.00.02
================================================================
 


Programming Hints:
------------------

1) It should be noted that a new/added conventional personality 
   must be assigned to a zone/channel position. To add a zone to 
   a radio click the "+" in a Personality Assignment to Zone 
   Window. To add a conventional personality to the radio, click 
   the "+" on a Conventional Personality Window. To add an 
   additional conventional personality to a zone go to the 
   Personality Assignment to Zone:Channel window for the 
   desired zone.  Click the right mouse key within the channel 
   table to add a conventional personality entry. Please read 
   the CPS help for additional information. 

2) Speed Dial buttons should not be programmed to the P1, P2, and
   P3 buttons on radios, which overlay these buttons with the menu 
   navigation keys. The speed dial buttons will not operate 
   in this configuration because the buttons function as the menu
   navigation keys when phone mode is entered. 

3) The CPS will allow the Radio Call List menu to be enabled on 
   radios without a numeric keypad. Radio Call List can not be
   accessed without a keypad. Do not program this combination. 


Known CPS Issue:
---------------

1) If multiple radios are read without exiting the CPS application
   the CPS will eventually terminate abnormally.  This typically
   occurs after approximately 50 radios are read. No radio or 
   codeplug data is lost. Reducing the number of applications 
   running on the computer will help to delay the occurance of 
   the problem.  If this problem is encountered restart the CPS 
   and reread the radio. It is recommended that the CPS be 
   periodically exited and restarted to avoid the problem and 
   improve CPS performance.
 
2) On some PCs, the CPS may abnormally terminate if Print Preview
   is attempted on the Print Custom screen. This problem only occurs
   when Print All is selected. This problem has been observed on 
   Compaq Windows 98 computers with the following programs running:
      * Easy Access Internet Program (cpqEasyAcc.exe)
      * Compaq Internet Watchdog Program (watchdog.exe)
   If this CPS function is to be used, it is recommended that these 
   programs be removed from the PC startup.  

3) When the tree view is printed some nodes may overlap on the
   printout and an extra blank page may be printed. This issue
   is more likely to occur on large codeplug configurations.   
 
4) If the left mouse key is double clicked on a view only cell 
   within a table, the cursor will remain as read-only even 
   if the cursor is moved off the view only table cell. To exit
   this state click the right mouse button.