Contents

1   Description

This instruction describes how to deactivate the Emergency Unlock mode. The user can deactivate the Emergency Unlock mode before it automatically ends to check that the managed element transitions to the expected License Management operation mode.

2   Procedure

2.1   Deactivate Emergency Unlock Mode

Prerequisites

• No documents are required.
• No tools are required.
• The following conditions must apply:
  • The Emergency Unlock mode is ACTIVATED.
  • An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

Steps

1. Navigate to the EmergencyUnlock managed object, for example:

   >dn ManagedElement=NODE06ST,SystemFunctions=1,Lm=1,EmergencyUnlock=1

2. Deactivate the Emergency Unlock mode:

   (EmergencyUnlock=1)>deactivate

   The system returns true if the operation is successful.

3. Verify that the Emergency Unlock mode was deactivated:

   (EmergencyUnlock=1)>show activationState

   The system returns activationState=INACTIVE if the Emergency Unlock mode now is deactivated.