Contents

1   Introduction

This document describes how to disable a trusted certificate.

1.1   Prerequisites

This section describes the prerequisites, which must be fulfilled before using the procedure.

1.1.1   Conditions

The following conditions must apply:

• The user has the System Security Administrator role.
• The trusted certificate is enabled.
• An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

2   Procedure

To disable a trusted certificate:

1. Navigate to the CertM Managed Object (MO), for example:

   >dn ManagedElement=NODE06ST,SystemFunctions=1,SecM=1,CertM=1

2. Enter Config mode:

   (CertM=1)>configure

3. Select the trusted certificate, for example:

   (config-CertM=1)>TrustedCertificate=1

   Note:  

   1 denotes the value of attribute trustedCertificateId of the configured TrustedCertificate MO instance.

   
   
4. Set the managed state to disabled:

   (config-TrustedCertificate=1)>managedState=DISABLED

5. Commit the change:

   (config-TrustedCertificate=1)>commit

6. Verify the change:

   (TrustedCertificate=1)>show -v managedState

   managedState=DISABLED