QLogic FCode Release Notes QLogic Corporation. All rights reserved. Table of Contents 1. Change History 2. Known Issues 3. Notices 4. Contacting Support 1. Change History version 1.05 08/25/10 Close ER0000000074950. Comment out mac.fth line 153. (Bit 6 (Jumbo Mode for Receive MAC) must always be set to 1.) version 1.04 04/30/10^M * Remove log2 word from the utilities file. Not found on SUN Fcode interpreter. * Remove all 'throw's from utilities and flash access methods at probe time. * Fix improper use of the encode-bytes word used in "mac-address" property. 2. Known Issues None 3. Notices Information furnished in this document is believed to be accurate and reliable. However, QLogic Corporation assumes no responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its use. QLogic Corporation reserves the right to change product specifications at any time without notice. Applications described in this document for any of these products are only for illustrative purposes. QLogic Corporation makes no representation nor warranty that such applications are suitable for the specified use without further testing or modification. QLogic Corporation assumes no responsibility for any errors that may appear in this document. 4. Contacting Support For further assistance, contact QLogic Technical Support at: http://support.qlogic.com Trademarks Accelera, Accelerating Cluster Performance, InfiniCon Systems, InfiniNIC, InfiniPath, InfiniView, QLA, QLogic, the QLogic logo, ReadyPath, SANdoctor, SANsurfer, and SilverStorm are registered trademarks of QLogic Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners. (c) Copyright 2013. All rights reserved worldwide. QLogic, the QLogic logo, and the Powered by QLogic logo are registered trademarks of QLogic Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners.