.TITLE	BAUD - Autobaud Terminal Handler

	.FACILITY BAUD,1

	.SEVERITY INFORMATIONAL

!  Messages issued for logging
	INIDONE	<initialization done>
	CONFMSG <configuration message received "!AD">/FAO_COUNT=1
	ASGCHN	<assigned channel on !AS>/FAO_COUNT=1
	RELREAD	<RELEASED state read with timeout made on !AS>/FAO_COUNT=1
	ADJREAD <ADJUST_SPEED state read with timeout made on !AD>/FAO_COUNT=1
	NRMREAD	<Normal read made on !AD>/FAO_COUNT=1
	ADDED	<added !AD to autobaud terminals>/FAO_COUNT=1
	AUTONOW	<!AD already an autobaud terminal>/FAO_COUNT=1
	REMOVE	<removed !AD from autobaud terminals>/FAO_COUNT=1
	SPEED	<terminal !AD speed set to !ZB>/FAO_COUNT=2
	TOUSER	<released !AD to user at speed !ZB>/FAO_COUNT=2
	HANG	<terminal !AD hung up>/FAO_COUNT=1
	NRMCOM  <AST received for normal read on !AD with IOSB= !XL !XL. Char was !XB. Speed was !ZB>/FAO_COUNT=5
	ADJCOM  <AST received for ADJ_SPEED read on !AD with IOSB= !XL !XL. Char was !XB. Speed was !ZB>/FAO_COUNT=5
	RELCOM  <AST received for RELEASE read on !AD with IOSB= !XL !XL. Char was !XB. Speed was !ZB>/FAO_COUNT=5
	DATARX <actual data received>
	UNKCMD	<unknown command>
	SYNERR	<syntax error>

	.SEVERITY FATAL

!  Messages issued on fatal errors
	SETAST	<$SETAST failed>
	HIBER	<$HIBER failed>
	CREMBX	<$CREMBX failed>
	SCHDWK	<$SCHDWK failed>
	QIO	<$QIO failed>
	MBXIO	<I/O error on configuration mailbox>
	GETDEV	<$GETDEV failed>
	ALLOC	<$ALLOC failed>
	ASSIGN	<$ASSIGN failed>
	DASSGN	<$DASSGN failed>
	DALLOC	<$DALLOC failed>
	SPEEDERR	<I/O error on terminal when setting speed>
	HANGERR	<I/O error on terminal during hangup>
	GETCHN	<$GETCHN failed>
	SETIMR	<$SETIMR failed>
	WAITFR	<$WAITFR failed>
	
	.END