Patch-ID# 115069-05

NOTE:
***********************************************************************
READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT
FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU
AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE
TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE.
***********************************************************************

Keywords: ha livecache
Synopsis: Sun Cluster 3.1: HA-Livecache Patch
Date: Dec/19/2005


Install Requirements: NA                      
                      
Solaris Release: 9

SunOS Release: 5.9

Unbundled Product: Sun Cluster

Unbundled Release: 3.1

Xref: This patch available for Solaris 8 as patch 115068

Topic: Sun Cluster 3.1: HA-Livecache Patch

Relevant Architectures: sparc

BugId's fixed with this patch: 4738554 4738630 4782148 4868654 4947790 6180149 6223013 6279720 6334156

Changes incorporated in this version: 6334156

Patches accumulated and obsoleted by this patch: 116111-03 119624-01

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

/opt/SUNWsclc/livecache/bin/check_db_state
/opt/SUNWsclc/livecache/bin/lc_monitor_check
/opt/SUNWsclc/livecache/bin/lc_monitor_start
/opt/SUNWsclc/livecache/bin/lc_monitor_stop
/opt/SUNWsclc/livecache/bin/lc_probe
/opt/SUNWsclc/livecache/bin/lc_svc_start
/opt/SUNWsclc/livecache/bin/lc_svc_stop
/opt/SUNWsclc/livecache/bin/lc_update
/opt/SUNWsclc/livecache/bin/lc_validate
/opt/SUNWsclc/xserver/bin/xserver_monitor_check
/opt/SUNWsclc/xserver/bin/xserver_monitor_start
/opt/SUNWsclc/xserver/bin/xserver_monitor_stop
/opt/SUNWsclc/xserver/bin/xserver_probe
/opt/SUNWsclc/xserver/bin/xserver_svc_start
/opt/SUNWsclc/xserver/bin/xserver_svc_stop
/opt/SUNWsclc/xserver/bin/xserver_update
/opt/SUNWsclc/xserver/bin/xserver_validate
/opt/SUNWsclc/xserver/etc/SUNW.sap_xserver
/opt/SUNWsclc/xserver/man/sman5/SUNW.sap_xserver.5

Problem Description:

6334156 in livecache 7.5 livecache is started as user "sdb" and our agent is not able to start it
 
(from 115069-04)
 
6279720 Need to add all changed binaries to U4 patches
 
(from 115069-03)
 
   This patch created to accumulate feature point patch 119624-01.
 
(from 115069-02)
 
6180149 Need to add all changed binaries to U3 patches
 
(from 115069-01)
 
   This patch created to accumulate feature point patch 116111-03.
 
(from 116111-03)
 
4947790 Changes to man pages for FBC 1191 and RFE 4782148
 
(from 116111-02)
 
4868654 xuser uses 'su - <user>' hence don't support SRM (project id) on s9.
 
(from 116111-01)
 
4738554 xserver_svc_start reports xserver isn't available during start up.
4738630 when LC_NAME is not defined correctly we print msg saying that it
        is not defined
4782148 Need more flexible mechanism to specify Dependent Path.
 
(from 119624-01)
 
6223013 patchadd fails when installing to an alternate root

Patch Installation Instructions:
--------------------------------
 
There are three (3) possible procedures for installing patches on Sun
Cluster 3.1.  The proper method to use and any additional instructions,
for this patch are specified below in the "Special Install Instructions"
section.
 
Refer to the chapter entitled "Patching Sun Cluster Software and
Firmware" in the "Sun Cluster 3.1 System Administration Guide" for a
description of the different install processes and instructions on how
to install Sun Cluster 3.1 patches.
 
Refer to the man pages for instructions on using 'patchadd' and
'patchrm' scripts provided with Solaris, to install and remove patches

Special Install Instructions:
-----------------------------
 
1. Before applying the patch, disable the agent's fault monitor.
 
2. To install, use the patch installation procedure for a
   "Non Rebooting Sun Cluster Patch" as described in the "Patching
   Sun Cluster Software and Firmware" chapter of the "Sun Cluster 3.1
   System Administration Guide".
 
   Bug 4782148
   -----------
 
   In order to get the complete fix for this bug, you must perform
   a Resource Type Upgrade as documented in the "Sun Cluster 3.1 Data
   Service for SAP xserver" guide after applying this patch.
 
   In order to back out the patch and roll back to the earlier version
   of the Resource Type, you must perform a Resource Type Downgrade as
   documented in the "Sun Cluster 3.1 Data Service Planning and
   Administration" guide after removing the patch.
 
3. Enable the agent's fault monitor after the patch installation
   is complete.
 
Bug 6334156
-----------
 
- When following the procedure "How to Install and Configure liveCache"
  in the "Sun Cluster Data Service for SAP liveCache Guide for Solaris OS"
  add the following fifth and sixth steps to the procedure:
 
  5. Copy /etc/opt/sdb from the node, on which you installed liveCache, to
     all the nodes that will run the liveCache resource. Ensure that the
     ownership of these files is the same on all nodes as it is on the node
     on which you installed liveCache
 
     Example:
     # tar cfB - /etc/opt/sdb | rsh phys-schost-1 tar xfB -
 
 
  6. Create a link from the /sapdb/LCA/db/wrk directory to the
     /sapdb/data/wrk directory as follows:
 
     # ln -s /sapdb/data/wrk /sapdb/LCA/db/wrk
 
- If you are using liveCache 7.5, confirm that the liveCache
  administrator user can run the lcinit command by adding the following
  step as step 5 in the procedure "How to Verfiy the liveCache
  Installation and Configuration"
 
  # su - <lc-name>adm
  $ lcinit
 
  where lc-name is the lowercase name of the liveCache database instance
 
- When installing liveCache, if you are using liveCache 7.5 or
  compatible versions, ensure that the liveCache administrator user
  (<lc-name>adm) is in the sdba user group.  Ensure that the liveCache
  administrator user's user ID is identical and belongs to the sdba group
  on each machine that can master the livecache resource. To meet these
  requirements, ensure that the entry for the liveCache administrator user
  in the /etc/group file on each machine is identical.
 
  For more information about the /etc/group file, see the group.4 man
  page.

README -- Last modified date:  Monday, December 19, 2005

