OBSOLETE Patch-ID# 114554-11
Keywords: xvr-1200 jfb graphics
Synopsis: Obsoleted by: 114554-12 SunOS 5.8: Sun XVR-1200 Graphics Accelerator Patch
Date: Oct/31/2003


Install Requirements: Additional instructions may be listed below                      
                      Reboot after installation                      
                      
Solaris Release: 8

SunOS Release: 5.8

Unbundled Product: 

Unbundled Release: 

Xref: 

Topic: 

Relevant Architectures: sparc.sun4u

BugId's fixed with this patch: 4744371 4767906 4799602 4807907 4808263 4819200 4821638 4822159 4822276 4830544 4830549 4833546 4834370 4834943 4835514 4837176 4837418 4837510 4838461 4847177 4849519 4853020 4860054 4860468 4867922 4881084 4891452 4891672 4891690 4891715 4893057 4893813 4899854 4899910 4911553

Changes incorporated in this version: 4899910 4911553

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

  /etc/rc2.d/S91jfbinit
  /platform/sun4u/kernel/drv/sparcv9/jfb
  /usr/lib/fbconfig/SUNWjfb_config
  /usr/openwin/server/modules/ddxSUNWjfb.so.1
  /usr/share/man/man1m/SUNWjfb_config.1m
  /usr/share/man/man7d/jfb.7d
/etc/init.d/jfbinit

Problem Description:

4899910 solid spans fake8 fixup might be skipped
4911553 fake8 rendering can hang with zero length spans
 
(from 114554-10)
4899854 Xsun crashes in sunifb_fillbox
 
(from 114554-09)
4893813 panics while idling with XVR-1200 as Xconsole
4893057 There is no SUNWjfb_config in /usr/share/man/man1m
4891452 Xsun dies during vsw512 ForceScreenSaver testcase while loading
	stipple tile
4891715 Xsun won't start on jfb after config utility does incorrect update
4891672 S9 paniced WARNING: [AFT1] Bus Error (BERR)
4891690 change pre-Solaris 9 drivers to lookup kernel thread id location at
	runtime
 
(from 114554-08)
4821638 improve PIO protection code
4881084 Several apps involving textures produces artifacts
4860468 volatile missing from register pointer declarations
4867922 fbconfig -defaults Should NOT set to 1152x900x66 after reboot
 
(from 114554-07)
4860054 identify new hardware
4849519 Remove redundant attribute settings
4830549 Add 1920x2400x25 support for IDTech 9.2M pixel LCD
4838461 stereo resolution && rapid movement == corruption of gl3dtest window
4834370 sometimes kernel dma trace cannot be extracted after dma gets stuck
4853020 pbuffer allocation/rendering corrupts framebuffer regions
 
(from 114554-06)
4847177 Direct access can hang after PCI clock is stopped
 
(from 114554-05)
4834943 Hitting the lowpower key causes the screen to not wakeup on keyboard
	activity
4837418 Raise the T-bus power-on frequency to 50MHz
4837176 Add support to margin on-board power supplies
4837510 IFB3 paniced while adding T-patch T114554-04
 
(from 114554-04)
4833546 port of IFB fix for 4829271
4830544 1920x1200 not listed for certain configurations
4744371 A shadow zone is seen on IFB3 stream b when  +running a stereo
	resolution.
4835514 PM resume does not restore the 1.8V PS
 
(from 114554-03)
4819200 jfb version of 4773187
4799602 need way to force SOG
4822159 try to implement vendor suggested sequence to segment the PCI bus
4822276 Add support for single pipe operation
 
(from 114554-02)
4767906 System panics whem yoyo is running on IFB3 in+doublewide mode enable.
 
(from 114554-01)
4807907 display corruption on both heads in doublewide config
4808263 Stream b duplicates on stream a after screen is left idle for 3 hours

Patch Installation Instructions:
--------------------------------
 
For Solaris 2.0-2.6 releases, refer to the Install.info file and/or
the README within the patch for instructions on using the generic
'installpatch' and 'backoutpatch' scripts provided with each patch.
 
For Solaris 7-9 releases, refer to the man pages for instructions on
using 'patchadd' and 'patchrm' scripts provided with Solaris.
Any other special or non-generic installation instructions should be
described below as special instructions.  The following example
installs a patch to a standalone machine:
 
	example# patchadd /var/spool/patch/104945-02
 
The following example removes a patch from a standalone system:
 
	example# patchrm 104945-02
 
For additional examples please see the appropriate man pages.

Special Install Instructions:
-----------------------------
	After patch installation, reboot the system to load the newly
	installed driver.

README -- Last modified date:  Tuesday, December 2, 2003

