OBSOLETE Patch-ID# 112140-01
Keywords: LOM netra t1
Synopsis: Obsoleted by: 112140-03 Lomlite2 lom_update_eeprom patch
Date: Nov/15/2001

Install Requirements: None                      
Solaris Release: 8

SunOS Release: 5.8

Unbundled Product: Netra Lights Out Management

Unbundled Release: 2.0

Xref: 

Topic: Lomlite2 configuration data update patch

Relevant Architectures: sparc
Note: netra t1 200

BugId's fixed with this patch: 4417373 4480653

Changes incorporated in this version: 4417373 4480653

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

lom_update_eeprom

Problem Description:

4480653	 Mechanism to deliver LOM firmware config files required.
4417373	 VDD_core check voltage appears to be wrong in FJ2-V1.1-258-7884-06.es

Patch Installation Instructions:
--------------------------------
 
This patch is only applicable to the following architecture(s).
	Netra T1 200
and will not update the configuration on other architectures.
 
This is not an OS patch and is not installed with the standard
patchadd(1M) command.  After unpacking the patch, follow the "Special
Install Instructions" below to upgrade the Lomlite2 eeprom configuration
data.
 
This patch is not OS-dependent.  The list of releases shown under the
"Solaris Release" and "SunOS Release" sections may not be complete.
The absence of the running Solaris Release or SunOS Release from the
lists above does not preclude the installation of this patch on the
hardware.

Special Install Instructions:
-----------------------------
 
 
**************************************************************************
**************************************************************************
**WARNING:****WARNING:****WARNING:****WARNING:****WARNING:****WARNING:**
 
*  PLEASE READ THE INSTRUCTIONS CAREFULLY AND ENTIRELY.  PLEASE FOLLOW THE
   INSTRUCTIONS EXACTLY AS THEY ARE STATED.
 
*  FAILURE TO FOLLOW INSTRUCTIONS COULD EITHER RESULT IN A DEFECTIVE BOARD OR
   UNSUCCESSFUL UPDATE.
 
*  THIS IS NOT A STANDARD PATCH in that it does not use the installpatch
   and backoutpatch scripts.
 
*  TAKE EVERY PRECAUTION TO ENSURE THAT THE UPGRADE IS NOT INTERRUPTED
   ONCE IT IS STARTED!
 
**WARNING:****WARNING:****WARNING:****WARNING:****WARNING:****WARNING:**
**************************************************************************
**************************************************************************
 
The patch delivers new configuration data that can be applied through the use
of the following command.
 
   # ./lom_update_eeprom
 
This will return with a confirmation request to which the user must
respond with 'C' if they wish to continue. The update process may take
a short time after which the LOM will reset itself.

README -- Last modified date:  Tuesday, January 7, 2003

