Patch-ID# 111174-03
Keywords: Starfire SSP
Synopsis: SSP 3.4: Send BBSRAM close net command upon netcon_server init
Date: May/10/2002

Solaris Release: 2.6 7 8

SunOS Release: 5.6 5.7 5.8

Unbundled Product: System Service Processor

Unbundled Release: 3.4

Xref: 

Topic: SSP 3.4: Send BBSRAM close net command upon netcon_server initialization
	NOTE:	To get the complete fix for 4362110 you also need to
		install the cvc driver and cvcd daemon patches on the
		Sun Enterprise 10000 domain:
			SunOS 5.5.1:
				cvc:	105168-06
				cvcd:	106311-02
			SunOS 5.6:
				cvc:	106381-05
				cvcd:	109334-02
			SunOS 5.7:
				cvc:	106541-16
				cvcd:	107450-03
			SunOS 5.8:
				cvc:	110389-04
				cvcd:	111049-02

Relevant Architectures: sparc

BugId's fixed with this patch: 4362110 4372969 4419070 4519218 4645657

Changes incorporated in this version: 4645657

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

/opt/SUNWssp/release/Ultra-Enterprise-10000/5/5/1/bin/netcon_server

Problem Description:

4645657 netcon_server logs unnecessary message during startup or restart
 
(from 111174-02)
 
4372969 netcon_server stuck in JTAG mode when domains and SSP connected via private net
4519218 netcon_server dies while in JTAG if /etc/.syslog_door has wrong permits
 
(from 111174-01)
 
4362110 Sun Enterprise 10000 network console should drop stale network connections
4419070 Send a BBSRAM close net command upon netcon_server initialization

Patch Installation Instructions:
--------------------------------
Refer to the Install.info file within the patch for instructions on
using the generic 'installpatch' and 'backoutpatch' scripts provided
with each patch. Any other special or non-generic installation
instructions should be described below.

Special Install Instructions:
-----------------------------
 
1. Exit all netcon sessions.
2. Kill all netcon_server processes.
3. Install this patch.
4. Restart the netcon_server processes.  Use "domain_switch" to set 
   SUNW_HOSTNAME to the target domain, then run "netcon_server -r".
   Repeat this for each domain.
5. Restart netcon sessions.

README -- Last modified date:  Friday, May 10, 2002

