File name: readme.txt
******************************************************************
|                                                                |
|  IBM(R) ServerGuide(TM) Scripting Toolkit, Version 1.1         |
|                                                                |
|  Part number 90P2961                                           |
|                                                                |
|  (C) Copyright International Business Machines Corporation     |
|      2003, 2004. All rights reserved.                          |
|                                                                |
|  US Government Users Restricted Rights -- Use, duplication     |
|  or disclosure restricted by GSA ADP Schedule Contract with    | 
|  IBM Corp.                                                     | 
|                                                                |
|  Notes:                                                        |
|  o  Before using this information and the product it supports, |
|     read the general information under "NOTICES AND TRADEMARKS"|
|     in this document.                                          |
|  o  Check the ServerGuide Scripting Toolkit Web site for the   |
|     latest version of this readme. See "SUPPORT WEB SITES" for |
|     more information.                                          |
|                                                                |
|  Updated 2 Sept 2004                                           |
|                                                                |                                
******************************************************************

1.0  Overview 
 
2.0  Change history
  2.1  ServerGuide Scripting Toolkit 1.1
  2.2  ServerGuide Scripting Toolkit 1.0.02
  2.3  ServerGuide Scripting Toolkit 1.0.01
  2.4  ServerGuide Scripting Toolkit 1.0

3.0  Installation
   
4.0  Supported servers
  4.1  Supported servers that might contain IBM ServeRAID(TM)
       controllers
  4.2  Supported servers that contain an integrated SCSI
       controller with RAID capabilities based on the LSI 1020 or
       LSI 1030 chipset
  4.3  Supported servers that contain an LSI IDEal RAID controller
  4.4  Supported servers that contain an IBM ServeRAID 7e
       (Adaptec(R) HostRAID(TM)) controller
  4.5  Supported servers that might contain a Fibre Channel
       host bus adapter
 
5.0  Supported deployment scenarios
  5.1  DOS-startable CD or DOS-startable diskette and data CD
  5.2  DOS-startable diskette and network share
  5.3  Remote Supervisor Adapter II or BladeCenter(TM) Management
       Module and network share
  5.4  Altiris Deployment Solution
  5.5  Microsoft(R) Automated Deployment Services (ADS)
 
6.0  Supported operating systems
  6.1  Windows(R) 2000 (Server and Advanced Server)
  6.2  Windows Server 2003 (Standard, Enterprise, and Web
       Editions)
  6.3  Red Hat(R) Linux(R), Version 7.3
  6.4  Red Hat Linux, Version 8.0
  6.5  Red Hat Enterprise Linux AS, Version 2.1
  6.6  Red Hat Enterprise Linux AS, Version 3

7.0  Solving ServerGuide Scripting Toolkit problems
  7.1  Error reporting
  7.2  Source system hangs during Linux deployment
  7.3  Loadlin fails to start Linux installation
  7.4  Problems with CD-based scenarios
  7.5  Network-based installation on an eServer(R) BladeCenter
       HS20, machine type 8832 with an LSI IDEal RAID controller
  7.6  Unknown device in Windows Device Manager with xSeries 206,
       machine type 8482 or xSeries 306, machine type 8836 and a
       Remote Supervisor Adapter II installed
  7.7  BladeCenter management module will not boot from ServerGuide 
       Scripting Toolkit image
  7.8  Known BIOS problems
  7.9  Fibre device driver installation fails for eServer BladeCenter
       blade servers
  7.10 Device drivers will not load for 3Com Ethernet adapter
  7.11 Red Hat Enterprise Linux AS 3 may hang during USB module
       insertion in xSeries 225, machine type 8649
  7.12 Problem installing Red Hat Enterprise Linux to a BladeServer 
       that has control of the media tray

8.0  Additional files, utilities, and information
  8.1  Selecting a network interface card (NIC) device driver
       during a deployment scenario
  8.2  Limitations
  
9.0  Support Web sites
 
10.0 Notices and trademarks
 

 
1.0  OVERVIEW
-------------
 
The ServerGuide Scripting Toolkit is a collection of
system-configuration tools and installation scripts that you can
use to deploy operating systems to your IBM eServer or xSeries(R)
server in a repeatable, predictable manner.
 
Translated versions of the licensing information and license
agreement for ServerGuide Scripting Toolkit are available from
the ServerGuide Scripting Toolkit Web site. See section 9.0, 
"Support Web sites," for more information.
 

 
2.0  CHANGE HISTORY
-------------------

This section contains information about the ServerGuide Scripting 
Toolkit change history.


2.1  ServerGuide Scripting Toolkit 1.1
--------------------------------------

ServerGuide Scripting Toolkit 1.1 includes the following changes:

o  New source tree directory structure to accommodate more
   deployment scenarios
o  Support for Altiris Deployment Solution for Windows 6.0 and 6.1
o  Support for Altiris Deployment Solution for Linux 5.6 SP1
o  Enhanced Microsoft ADS support
   - Update the system BIOS
   - Update the ServeRAID BIOS and Firmware 
   - Install the Windows Director Agent
o  Support for Installing Red Hat Enterprise Linux AS 3.0
o  Support for configuring Fibre Channel host bus adapters, 
   including the following:
   -  IBM TotalStorage FC2-133 Host Bus Adapter 
   -  IBM HS20 Fibre Channel Expansion Card 
   -  FAStT FC-2 Host Bus Adapter
o  Enhanced support for configuring supported RAID controllers 
   and adapters, including the following:
   -  IBM ServeRAID 4H
   -  IBM ServeRAID 4Lx
   -  IBM ServeRAID 4Mx
   -  IBM ServeRAID 5i
   -  IBM ServeRAID 6i
   -  IBM ServeRAID 6i+
   -  IBM ServeRAID 6M
   -  IBM ServeRAID 7e (Adaptec HostRAID) SATA
   -  IBM ServeRAID 7e (Adaptec HostRAID) SCSI
   -  IBM ServeRAID 7t
   -  Integrated SCSI controllers with RAID capabilities based on
      the LSI 1020 and LSI 1030 chipsets.
   -  LSI IDEal RAID controller in an IBM eServer BladeCenter
      HS20, machine type 8832
o  Updated most utilities to newer versions, for example:
   - ipssend.exe is now at version 7.0
   - Fixed intermittent hang in savestat.exe
   - Added new command line options to clini.exe
o  Support for installing Windows with a BladeCenter Management 
   Module virtual diskette
o  Support for installing Director Agent with Windows
o  Reworked environment variables to reduce DOS environment space
o  Updated "IBM ServerGuide Scripting Toolkit User's Reference"
   document
      

2.2  ServerGuide Scripting Toolkit 1.0.02
-----------------------------------------

ServerGuide Scripting Toolkit 1.0.02 included the following
changes:

o  Support for the following servers:
   -  xSeries 206, machine type 8482
   -  xSeries 306, machine type 8836
   -  eServer BladeCenter HS40, machine type 8839


2.3  ServerGuide Scripting Toolkit 1.0.01
-----------------------------------------

ServerGuide Scripting Toolkit 1.0.01 included the following 
changes:

o  Support for the following servers:
   -  xSeries 225, machine type 8649
   -  eServer 325, machine type 8835
o  Reduced DOS environment space usage 
  
 
2.4  ServerGuide Scripting Toolkit 1.0
--------------------------------------
 
This was the first release of ServerGuide Scripting Toolkit.
 

 
3.0  INSTALLATION
-----------------
 
Instructions for unpacking the ServerGuide Scripting Toolkit files
are provided in the "IBM ServerGuide Scripting Toolkit User's 
Reference." This guide is in Portable Document Format (PDF) and 
requires Adobe Acrobat Reader to view it.

The source tree directory structure changed with the ServerGuide 
Scripting Toolkit 1.1, so you cannot install over an earlier 
version. Many environment variables in the usrvars.bat and 
netvars.bat files also changed, so you cannot use existing 
scripts.

Complete the following steps to upgrade to ServerGuide Scripting 
Toolkit 1.1:

1.  Unpack the new ServerGuide Scripting Toolkit 1.1, this will 
    create the new directory structure. The new Toolkit 
    directory is already present.

2.  Move any operating system files to the new structure:
    \stkfiles\os directories to \sgshare\sgdeploy\os

3.  Move any update files to the new structure:
    \stkfiles\updates directories to \sgshare\sgdeploy\updates

4.  Move any ServerGuide device drivers to the new structure:
    o  \stkfiles\w2000drv\$oem$\$1\drv directories to 
       \sgshare\sgdeploy\drvs\w2k_drv
    o  \stkfiles\w2003drv\$oem$\$1\drv directories to 
       \sgshare\sgdeploy\drvs\w23_drv

Note:  Use of old diskette images from ServerGuide Scripting 
       Toolkit 1.0 (all versions) will NOT be supported with 
       ServerGuide Scripting Toolkit 1.1. The previous boot 
       images cannot be used because the directory names and 
       base directory structures have changed.
 

 
4.0  SUPPORTED SERVERS
----------------------
 
You can use the ServerGuide Scripting Toolkit to deploy
operating systems to the following IBM eServer and xSeries
servers:
 
o  xSeries 205, machine type 8480
o  xSeries 206, machine type 8482
o  xSeries 225, machine type 8647
o  xSeries 225, machine type 8649
o  xSeries 235, machine type 8671
o  xSeries 255, machine type 8685
o  xSeries 305, machine type 8673
o  xSeries 306, machine type 8836
o  xSeries 335, machine type 8830
o  xSeries 335, machine type 8676
o  xSeries 345, machine type 8670
o  xSeries 360, machine type 8686
o  xSeries 365, machine type 8861
o  xSeries 365, machine type 8862
o  xSeries 440, machine type 8687
o  xSeries 445, machine type 8870
o  eServer 325, machine type 8835
o  eServer BladeCenter HS20, machine type 8678
o  eServer BladeCenter HS20, machine type 8832
o  eServer BladeCenter HS40, machine type 8839

Notes: o The ServerGuide Scripting Toolkit supports only 
         standalone xSeries 440, machine type 8687 and 
         xSeries 445, machine type 8870 servers.

       o The device driver set from ServerGuide version 7.2.03 
         or later (if the newer ServerGuide release supports your 
         target server) is supported by ServerGuide Scripting 
         Toolkit version 1.1.
 

4.1  Supported servers that might contain IBM ServeRAID 
     controllers
-------------------------------------------------------
 
The following servers might contain ServeRAID controllers.
You can use utilities that come with the ServerGuide Scripting
Toolkit to configure ServeRAID controllers as part of the
deployment process.
 
o  xSeries 205, machine type 8480
o  xSeries 206, machine type 8482
o  xSeries 225, machine type 8647
o  xSeries 225, machine type 8649
o  xSeries 235, machine type 8671
o  xSeries 255, machine type 8685
o  xSeries 305, machine type 8673
o  xSeries 306, machine type 8836
o  xSeries 335, machine type 8830
o  xSeries 335, machine type 8676
o  xSeries 345, machine type 8670
o  xSeries 360, machine type 8686
o  xSeries 365, machine type 8861
o  xSeries 365, machine type 8862
o  xSeries 440, machine type 8687
o  xSeries 445, machine type 8870
o  eServer 325, machine type 8835

 
4.2  Supported servers that contain an integrated SCSI controller 
     with RAID capabilities based on the LSI 1020 or LSI 1030
     chipset
-----------------------------------------------------------------
 
The following servers contain an integrated SCSI controller with 
RAID capabilities based on the LSI 1020 or LSI 1030 chipset. You
can use the cfg1030 utility that comes with the ServerGuide
Scripting Toolkit to configure these controllers as part of the
deployment process.
 
o  xSeries 225, machine type 8647
o  xSeries 225, machine type 8649
o  xSeries 235, machine type 8671
o  xSeries 335, machine type 8830
o  xSeries 335, machine type 8676
o  xSeries 345, machine type 8670
o  xSeries 365, machine type 8861
o  xSeries 365, machine type 8862
o  xSeries 445, machine type 8870
o  eServer 325, machine type 8835
o  eServer Bladecenter HS20, machine type 8678
o  eServer BladeCenter HS20, machine type 8832
o  eServer BladeCenter HS40, machine type 8839

 
4.3  Supported servers that contain an LSI IDEal RAID controller
---------------------------------------------------------------- 
 
The following server contains an LSI IDEal RAID controller. You
can use the hypercfg utility that comes with the ServerGuide
Scripting Toolkit to configure this controller as part of the
deployment process:
 
o  eServer BladeCenter HS20, machine type 8832


4.4  Supported servers that contain an IBM ServeRAID 7e (Adaptec
     HostRAID) controller
----------------------------------------------------------------

The following servers contain an IBM ServeRAID 7e (Adaptec
HostRAID) controller. You can use the acuichsv utility to
configure a SATA controller, or the raidsel utility to configure a
SCSI controller, as part of the deployment process.

o  xSeries 206, machine type 8482
o  xSeries 306, machine type 8836


4.5  Supported servers that might contain a Fibre Channel
     host bus adapter
---------------------------------------------------------
The following servers might contain Fibre Channel host bus
adapters. You can use the fibrecfg utility that comes with the
ServerGuide Scripting Toolkit to configure Fibre Channel host bus
adapters as part of the deployment process.

o  xSeries 225, machine type 8647
o  xSeries 225, machine type 8649
o  xSeries 235, machine type 8671
o  xSeries 255, machine type 8685
o  xSeries 305, machine type 8673
o  xSeries 335, machine type 8830
o  xSeries 335, machine type 8676
o  xSeries 345, machine type 8670
o  xSeries 360, machine type 8686
o  xSeries 365, machine type 8861
o  xSeries 365, machine type 8862
o  xSeries 440, machine type 8687
o  xSeries 445, machine type 8870
o  eServer 325, machine type 8835
o  eServer BladeCenter HS20, machine type 8678
o  eServer BladeCenter HS20, machine type 8832
o  eServer BladeCenter HS40, machine type 8839

 

5.0  SUPPORTED DEPLOYMENT SCENARIOS
-----------------------------------
 
The ServerGuide Scripting Toolkit supports the following 
deployment scenarios:
 
o  DOS-startable CD or DOS-startable diskette and data CD
o  DOS-startable diskette and network share
o  Remote Supervisor Adapter II or BladeCenter Management Module
   and network share
o  Altiris Deployment Solution
o  Microsoft Automated Deployment Services (ADS)
 

5.1  DOS-startable CD or DOS-startable diskette and data CD
-----------------------------------------------------------
 
You can use a DOS-startable diskette with a data CD to deploy
Microsoft Windows to all supported servers that have both a
diskette drive and a CD drive.

This includes all supported servers except the following:

o  eServer BladeCenter HS20, machine type 8678
o  eServer BladeCenter HS20, machine type 8832
o  eServer BladeCenter HS40, machine type 8839

You can use a DOS-startable CD to deploy Microsoft Windows to all 
supported servers that have a CD drive.

This includes all supported servers except the following:

o  eServer BladeCenter HS40, machine type 8839

Notes:
o  (eServer BladeCenter HS20, machine type 8832 server) You can
   use this deployment scenario to deploy Windows if the target
   server has one of the following BIOS code levels installed:
   -  version 1.01 (part number 23K4695)
   -  version 1.04 (part number 26K9227)
   
   If BIOS version 1.02 (part number 26K4905) is installed, the
   deployment scenario fails.
   
o  (eServer BladeCenter HS20, machine type 8678 server) You can
   use this deployment scenario to deploy Windows if the target
   server has one of the following BIOS code levels installed:
   -  version 1.05 (part number 25K9216)
   -  version 1.07 (part number 26K9217)
   
   If BIOS version 1.06 (part number 26K3278) is installed, the
   deployment scenario fails. 
   

5.2  DOS-startable diskette and network share
---------------------------------------------
 
You can use a DOS-startable diskette with a network share to
deploy Microsoft Windows or Red Hat Linux to all supported servers
that have a diskette drive and access to a network share.

 
5.3  Remote Supervisor Adapter II or BladeCenter Management Module
     and network share
------------------------------------------------------------------
 
You can use a virtual diskette to deploy Microsoft Windows to all
supported servers that contain a Remote Supervisor Adapter II, or
a BladeCenter Management Module. This includes the following
servers:
 
o  xSeries 205, machine type 8480
o  xSeries 206, machine type 8482
o  xSeries 225, machine type 8649
o  xSeries 235, machine type 8671
o  xSeries 255, machine type 8685
o  xSeries 305, machine type 8673
o  xSeries 306, machine type 8836
o  xSeries 345, machine type 8670
o  xSeries 365, machine type 8861
o  xSeries 365, machine type 8862
o  xSeries 445, machine type 8870
o  eServer BladeCenter HS20, machine type 8678
o  eServer BladeCenter HS20, machine type 8832
o  eServer BladeCenter HS40, machine type 8839

Note:  The xSeries 445, machine type 8870 is only supported when
       a Remote Supervisor Adapter II-EXA is installed.
 

5.4  Altiris Deployment Solution
--------------------------------

You can use the ServerGuide Scripting Toolkit with the Altiris
Deployment Solution to deploy Microsoft Windows or Red Hat Linux
to all supported servers. The following versions of Altiris 
Deployment Solution have been tested and are supported with this 
version of the ServerGuide Scripting Toolkit:

o  Altiris Deployment Solution for Linux, version 5.6 SP1
o  Altiris Deployment Solution for Windows, version 6.0
o  Altiris Deployment Solution for Windows, version 6.1

Note:  Altiris Deployment Solution for Windows, version 6.1 
       SP1 is not supported.

The following versions of Linux are supported for deployment with 
the Altiris Deployment Solution:

o Red Hat Enterprise Linux AS 2.1 is supported by all versions of 
  the Altiris Deployment Solution.
o Red Hat Enterprise Linux AS 3.0 is supported by Linux DS 5.6 SP1 
  and Windows Deployment Solution 6.1 (Windows Deployment Solution 
  6.0 is not supported with Red Hat Enterprise Linux AS 3.0).

The following servers are not supported by Altiris Deployment 
Solution, version 6.0 (these machines are supported by Altiris 
Deployment Solution, version 6.1):

o  xSeries 206, machine type 8482
o  xSeries 306, machine type 8836
o  xSeries 440, machine type 8687
o  xSeries 445, machine type 8870


5.5  Microsoft Automated Deployment Services (ADS)
--------------------------------------------------
 
You can use Microsoft ADS to deploy Microsoft Windows to all
supported servers.

In some cases, performing a memory-intensive DOS-based task such as 
updating the server BIOS code or IBM ServeRAID firmware code requires 
more conventional memory (RAM) than is available after loading the 
Microsoft ADS virtual boot diskette and the IBM ServerGuide Scripted 
Toolkit with network connectivity. The following list shows a 
representative sampling of server BIOS code updates using the 
ServerGuide Scripted Toolkit with ADS that have been tested:
		Old	New
Model	Name	BIOS	BIOS	Status
8480	x205	1.45	1.47	pass
8482	x206	1.19	1.20	pass
8647	x225	1.37	1.40	fail
8670	x345	1.15	1.16	pass
8671	x235	1.12	1.13	pass
8673	x305	1.62	1.62	fail

Updating ServeRAID firmware using ServerGuide Scripted Toolkit 
with ADS was verified on an xSeries 225, machine type 8647 with
a ServeRAID 4H RAID controller.


6.0  SUPPORTED OPERATING SYSTEMS
--------------------------------
 
You can use the ServerGuide Scripting Toolkit to deploy the
following operating systems to supported servers:
 
o  Windows 2000 (Server and Advanced Server)
o  Windows Server 2003 (Standard, Enterprise, and Web Editions)
o  Red Hat Linux, Version 7.3
o  Red Hat Linux, Version 8.0
o  Red Hat Enterprise Linux AS, Version 2.1
o  Red Hat Enterprise Linux AS, Version 3

You can use the ServerGuide Scripting Toolkit to deploy the 
English, French, German, Italian, Spanish, and Swedish language 
versions of Microsoft Windows.
 

6.1  Windows 2000 (Server and Advanced Server)
----------------------------------------------
 
You can deploy Windows 2000 (Server and Advanced Server) to all
supported servers, except the following:

o  eServer 325, machine type 8835
 

6.2  Windows Server 2003 (Standard, Enterprise, and Web Editions)
-----------------------------------------------------------------
 
You can deploy Windows Server 2003 (Standard, Enterprise, and Web 
Editions) to all supported servers.

Note:  The eServer 325, machine type 8835 supports only the 32-bit
       version of Windows Server 2003, Enterprise Edition.
 

6.3  Red Hat Linux, Version 7.3
-------------------------------
 
You can deploy Red Hat Linux, Version 7.3 to the following 
supported servers:
 
o  xSeries 205, machine type 8480*
o  xSeries 225, machine type 8647*
o  xSeries 225, machine type 8649*
o  xSeries 235, machine type 8671*
o  xSeries 255, machine type 8685
o  xSeries 305, machine type 8673*
o  xSeries 335, machine type 8830*
o  xSeries 335, machine type 8676*
o  xSeries 345, machine type 8670
o  xSeries 360, machine type 8686*
o  eServer BladeCenter HS20, machine type 8678
 
The operating system is certified by the vendor for the servers 
marked with an asterisk (*). It is not formally supported by
IBM.
 

6.4  Red Hat Linux, Version 8.0
-------------------------------
 
You can deploy Red Hat Linux, version 8.0 to the following 
supported servers:
 
o  xSeries 205, machine type 8480*
o  xSeries 225, machine type 8647*
o  xSeries 225, machine type 8649*
o  xSeries 235, machine type 8671*
o  xSeries 255, machine type 8685*
o  xSeries 305, machine type 8673
o  xSeries 335, machine type 8676
o  xSeries 345, machine type 8670
o  xSeries 360, machine type 8686
o  eServer Bladecenter HS20, machine type 8678
 
The operating system is certified by the vendor for the servers 
marked with an asterisk (*). It is not formally supported by
IBM.
 

6.5  Red Hat Enterprise Linux AS, Version 2.1
---------------------------------------------
 
You can deploy Red Hat Enterprise Linux AS, Version 2.1 to all 
supported servers.


6.6  Red Hat Enterprise Linux AS, Version 3
-------------------------------------------
 
You can deploy Red Hat Enterprise Linux AS, Version 3 to all 
supported servers.
    
    

7.0  SOLVING SERVERGUIDE SCRIPTING TOOLKIT PROBLEMS
--------------------------------------------------- 

This section contains information about solving problems
that might occur as you use ServerGuide Scripting Toolkit.


7.1  Error reporting
--------------------

Each DOS batch file (sample scripts) performs a task, calls other
ServerGuide Scripting Toolkit utilities to perform a task, or
calls other batch files to perform a task. The ServerGuide
Scripting Toolkit performs limited error-checking using the return
codes from the utilities that are called. Persistent-state
information is used to communicate errors, which are otherwise
cleared, that are returned from other batch files.

Note:  No log files are created by the ServerGuide Scripting
       Toolkit to report errors.
       
When an error is encountered, the batch file currently in-process
stops and displays an error message. If more than one batch file
is in-process, each file will report an error message. You must
correct the problem; then, restart the deployment scenario.

Attention:  When you restart a deployment scenario after an error
            is encountered, the process always starts from the
            beginning. It does not resume from the last task
            correctly performed.


7.2  Source system hangs during Linux deployment
------------------------------------------------

When you are deploying Red Hat Enterprise Linux AS, Version 2.1
from a source system running Microsoft Internet Information
Services (IIS), the source system might appear to hang. To solve
this problem, disable the IIS HTTP Keep-Alive feature.  


7.3  Loadlin fails to start Linux installation
----------------------------------------------

Loadlin might fail to start the Linux installation if the 
parameter file contains more than 256 characters. By default, the 
maximum command-line length that can be passed to the kernel is 
256 characters. See the Loadlin documentation for information 
about changing the Linux kernel command-line length.  


7.4  Problems with CD-based scenarios
-------------------------------------

When you create a CD for a deployment scenario, be sure to enable 
all DOS 8.3 character file names in the ISO image. Otherwise, 
file names that contain characters such as the tilde (~), dollar 
sign ($), and number sign (#) might be renamed and cause the
CD-based deployment scenario to fail.  


7.5  Network-based installation on an eServer BladeCenter HS20,
     machine type 8832 with an LSI IDEal RAID controller
---------------------------------------------------------------

You must use hypercfg version 3.6 when performing a network-based
installation on an eServer BladeCenter HS20, machine type 8832
with an IDE RAID controller.

To obtain the latest version of this utility, go to the IBM
Support Page and search for "LSI Hyper Configuration Utility" for
the eServer BladeCenter HS20, machine type 8832.

Note:  You can search specifically for hypercfg version 3.6, by
       the part number 26K9152.


7.6  Unknown device in Windows Device Manager with xSeries 206,
     machine type 8482 or xSeries 306, machine type 8836 and a
     Remote Supervisor Adapter II installed
---------------------------------------------------------------

When an IBM Remote Supervisor Adapter II is installed in either an
xSeries 206, machine type 8482 or xSeries 306, machine type 8836,
the list of devices in the Windows Device Manager might contain an
unknown device. This is expected, and a future Automatic Server
Restart driver will remove this item from the list of devices.


7.7  BladeCenter management module will not boot from ServerGuide 
     Scripting Toolkit image
-----------------------------------------------------------------

If the BladeCenter management module will not boot the ServerGuide
Scripting Toolkit virtual-floppy diskette image, make sure that
there is no diskette in the diskette drive of the BladeCenter unit.
If there is a diskette in the diskette drive of the BladeCenter 
unit, the BladeCenter management module might boot from this 
diskette instead of from the ServerGuide Scripting Toolkit 
virtual-floppy diskette image.


7.8  Known BIOS problems
------------------------

This section contains information about known BIOS problems 
involving the ServerGuide Scripting Toolkit.


7.8.1  eServer xSeries 205 Type 8480, BIOS version 1.47, 
       build ID JPE147A
--------------------------------------------------------

If the BIOS update loops continuously and does not get past the 
update portion of its processing, edit the lcreflsh.bat BIOS file.

o  lcreflsh.bat is located in the following directory, if the 
   ServerGuide Scripting Toolkit was setup using the default 
   settings:
   \sgshare\sgdeploy\updates\8480\BIOS 

o  Edit the lcreflsh.bat file to remove the /r flag. The revised 
   file should have the following line:
   flash2 /i:flashfil.fls /v /u

Save changes to the file; then, start the Toolkit process.


7.8.2  eServer xSeries 225 Type 8647, BIOS version 1.40, 
       build ID OPE140A
--------------------------------------------------------

If the "Insufficient memory" message is displayed When flashing 
BIOS over a network, the BIOS update did not take place even 
though the process appears to have completed successfully.

The update can be performed with BIOS version 1.37 or 
build ID OPE137A. 


7.8.3  eServer xSeries 225 Type 8649, BIOS version 1.05, 
       build ID OQE105A
--------------------------------------------------------

If the "Insufficient memory" message is displayed When flashing 
BIOS over a network, the BIOS update did not take place even 
though the process appears to have completed successfully.

The update can be performed with BIOS version 1.04 or 
build ID OQE104A.


7.8.4  eServer 325 Type 8835, BIOS version 1.28, build ID M1E128A
-----------------------------------------------------------------

If the "Cannot flash if Memory Managers (e.g. HIMEM) present" 
message is received When flashing BIOS to version 1.28, edit the
lcreflsh.bat BIOS file.

o  lcreflsh.bat is located in the following directory, if the 
   ServerGuide Scripting Toolkit was setup using the default 
   settings:
   \sgshare\sgdeploy\updates\8835\BIOS 

o  Add the following line to the lcreflsh.bat file:
   phlash16.exe /x /p /s /exit flashfil.fls

Save changes to the file; then, start the Toolkit process.


7.8.5  eServer xSeries 445 Type 8870, BIOS version 1.15, 
       build ID REJT42B
--------------------------------------------------------

System hangs at the "Starting PC DOS" prompt while booting when 
a Remote Supervisor Adapter (RSA) II card is installed.

System works correctly with BIOS version 1.12 or build ID REJT37A.


7.8.6  eServer xSeries 360 Type 8686, BIOS 1.12, build ID RUKT56A
-----------------------------------------------------------------

Attempting to upgrade from BIOS 1.12 (build ID RUKT56A) using the
Toolkit integration with Altiris Deployment Solution (Windows or 
Linux) is not supported.  

If updating from BIOS version 1.12 using the Altiris
integration the procedure may hang during the "Erasing"
portion of the system BIOS update and thus might damge the system
BIOS code.

If you have already attempted this procedure, it may be possible to 
restore your system BIOS from the backup location if it has been 
damaged.  See the eServer xSeries 360 Type 8686 Hardware Maintenance 
Manual for information about restoring BIOS from the backup location.

Updating from another version of the BIOS with this deployment 
method or any other Toolkit deployment method is supported.



7.8.7  eServer xSeries 206 Type 8482, BIOS version 1.20, 
       build ID KEE120A
--------------------------------------------------------
This system BIOS code update is not supported when included as 
part of the DOS-startable CD deployment scenario.  It is 
supported with all other deployment methods, including the
DOS-startable diskette and data CD.

If you include this system BIOS code update with the DOS-startable
CD scenario, the Toolkit process may hang at the "Running system 
BIOS update ..." prompt.



7.9  Fibre device driver installation fails for eServer BladeCenter
     blade servers
-------------------------------------------------------------------

The directory name for the fibre driver of Windows Server 2003 taken 
from a ServerGuide CD, version 7.2 04 or earlier, has nine characters: 
DOS is limited to eight characters. The directory name, and references 
to it, must be renamed to meet the DOS eight-character naming limitation
in order to work with the ServerGuide Scripting Toolkit.


When using the device driver set from ServerGuide version 7.2.04 or 
earlier to install Windows Server 2003 onto a fibre device in an eServer 
BladeCenter blade server, the following change must be made to the 
driver set:  


1.  Go to the directory which contains the Windows Server 2003 device 
    driver set.  

    Note:  If the Toolkit was set up using the defaults that would be:
     \sghare\sgdeploy\sgtk\drvs\w23_drv\ql23hs20 

2.  Rename the directory hs20_2003 to an 8.3 compliant name, 
    such as:  hs20_2K3.

3.  Edit the drvinfo.ini file and change the path parameter match the 
    name used in bullet 2:   hs20_2k3\txtsetup.oem.


7.10 Device drivers will not load for 3Com Ethernet adapter
-----------------------------------------------------------

The 3Com Ethernet device driver available from the 3Com Website is 
combined with the Dynamic Access software on a single diskette. The 
ServerGuide Toolkit is unable to load the device driver from this 
combined image.

The 3Com Ethernet device driver that is available from the IBM Support 
Website is packaged separately from the Dynamic Access software. If 
the device driver fails to load, download the device driver that is 
packaged by itself, without the Dynamic Access software. If you are 
unable to download the device driver by itself, delete the DASetup.exe 
file from the root of the combined driver diskette prior to scanning 
the driver with DScan.


7.11 Red Hat Enterprise Linux AS 3 may hang during USB module
     insertion in xSeries 225, machine type 8649
-------------------------------------------------------------

Installation of Red Hat Enterprise Linux AS 3 may hang during USB 
module insertion in the xSeries 225, machine type 8649. To prevent 
this problem, make the following change to the LOADLIN parameter 
file generation section of the INSTOS.BAT file in the 
sgdeploy\sgtk\examples\linux directory:

Before change:
echo /dev/ram rw initrd=%IRD_PATH%\%IRD_FILE% >> %RAMDSK%\
  LOADLIN.PAR

After change:
echo /dev/ram rw initrd=%IRD_PATH%\%IRD_FILE% nousb >> %RAMDSK%\
  LOADLIN.PAR


7.12 Problem installing Red Hat Enterprise Linux to a blade server 
     that has control of the media tray
------------------------------------------------------------------

There might be a problem installing Red Hat Enterprise Linux to a 
BladeServer if the blade server has control of the media tray
(currently has access to the CD and floppy drive).

To solve this problem, move control of the media try to another 
blade server or make the following change to the LOADLIN parameter 
file generation section of the INSTOS.BAT file in the 
sgdeploy\sgtk\examples\linux directory:

Before change:
echo /dev/ram rw initrd=%IRD_PATH%\%IRD_FILE% >> %RAMDSK%\
  LOADLIN.PAR

After change:
echo /dev/ram rw initrd=%IRD_PATH%\%IRD_FILE% 
  nousbstorage >> %RAMDSK%\LOADLIN.PAR


8.0  ADDITIONAL FILES, UTILITIES, AND INFORMATION
-------------------------------------------------

This section contains information that is not documented in the 
"IBM ServerGuide Scripting Toolkit User's Reference." 


8.1  Selecting a network interface card (NIC) device driver
     during a deployment scenario
-----------------------------------------------------------

If you use one of the following deployment scenarios, you must
select the device driver for the NIC when you start the target 
server from the DOS-startable (bootable) diskette:

o  Using a DOS-startable diskette and network share
o  Using a Remote Supervisor Adapter II and network share

If the target server is an xSeries 440, machine type 8687, be sure
to select "Broadcom NDIS network driver (xSeries 440 only)". If
the target server is an eServer BladeCenter HS20, machine type
8832, be sure to select "Broadcom NDIS network driver (B57)". 

If the target server requires a Broadcom device driver and is 
neither an xSeries 440, machine type 8687 server nor an eServer
BladeCenter HS20, machine type 8832 server, you can select either
of the two Broadcom device drivers.


8.2  Limitations
----------------

The following limitations are applicable to this version of the
ServerGuide Scripting Toolkit:

o  The "altboot /b" command requires the follwing BIOS versions 
   and build IDs on the following servers:
   -  xSeries 225, machine type 8647: BIOS version 1.40 
      (build ID OPE140A) or later
   -  xSeries 225, machine type 8649: BIOS version 1.07 
      (build ID OQE107A) or later
   
o  The emm386.exe expanded memory device driver is not supported
   by the ServerGuide Scripting Toolkit. The following utilities
   and functions are incompatible with this device driver:
   -  hwdetect.exe
   -  savestat.exe
   -  BIOS code updates
   -  Firmware code updates

o  Linux operating systems are case-sensitive. Make sure that the
   case of the file and directory names matches the corresponding
   reference in any command sequence that refers to them, such as
   command sequences in usrvars.bat and netvars.bat files.
   
   ex. The default installation directory for ServerGuide
       Scripting Toolkit files is "sgdeploy", so the TKDIR
       variable in usrvars.bat must be set to "sgdeploy" and not
       "SGDEPLOY".

o  Enabling and then either configuring or installing to the LSI 
   IDEal RAID devices on the eServer BladeCenter HS40, machine 
   type 8839 is not supported by the ServerGuide Scripting Toolkit.

o  When installing Linux on an xSeries 206, machine type 8482, only 
   Red Hat Enterprise Linux AS 3 U2 or later is supported.

o  ServerGuide Scripting Toolkit only supports the installation of 
   IBM Director Agent 4.20 or later. 


9.0  SUPPORT WEB SITES
---------------------- 
 
The following Web pages provide resources for understanding, 
using, and troubleshooting IBM deployment and systems-management 
software:
 
o  IBM Remote Deployment Manager page
 
   http://www.ibm.com/servers/eserver/xseries/systems_management/
   sys_migration/rdm.html
 
   This Web page provides an overview of IBM Remote Deployment 
   Manager.
 
o  IBM ServerGuide page
 
   http://www.ibm.com/pc/ww/eserver/xseries/serverguide/index.html
 
   This Web page provides an overview of ServerGuide.
 
o  IBM ServerGuide Scripting Toolkit page
   http://www.ibm.com/pc/support/site.wss/
   document.do?lndocid=MIGR-53564
 
   This Web page provides an overview of the ServerGuide Scripting 
   Toolkit. You can download the latest version of the ServerGuide
   Scripting Toolkit readme.txt file here.
 
o  IBM ServerProven(R) page
 
   http://www.ibm.com/pc/us/compat/index.html
 
   This Web page provides compatibility information about 
   hardware, software, and middleware.
 
o  IBM Support page
 
   http://www.ibm.com/pc/support/
 
   This is the IBM Support Web site for IBM hardware and 
   systems-management software. 
 
o  IBM Systems Management Software: Download/Electronic Support 
   page
 
   http://www.ibm.com/pc/us/eserver/xseries/systems_management/
   dwnl.html
 
   Use this Web page to download IBM systems-management software, 
   including the ServerGuide Scripting Toolkit.
 
o  IBM UpdateXpress page
 
   http://www-1.ibm.com/servers/eserver/xseries/
   systems_management/sys_migration/xpress.html
 
   This Web page provides an overview of UpdateXpress. It also 
   contains links to pages from which you can download 
   UpdateXpress, order an UpdateXpress CD, or purchase a 
   subscription from a vendor other than IBM.
 
o  IBM xSeries Systems Management page
 
   http://www.ibm.com/pc/ww/eserver/xseries/systems_management/
   index.html
 
   This Web page provides an overview of IBM systems-management 
   software.    
 
 

10.0  NOTICES AND TRADEMARKS
----------------------------
 
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some jurisdictions do not allow disclaimer of express or
implied warranties in certain transactions, therefore, this
statement may not apply to you.
 
This information could include technical inaccuracies or
typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in new
editions of the publication. IBM may make improvements and/or
changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
 
The following terms are trademarks of the IBM Corporation in the
United States, other countries, or both:
    
BladeCenter
eServer
IBM
ServerGuide
ServerProven
ServeRAID
xSeries
  
Adaptec and HostRAID are trademarks of Adaptec, Incorporated, in
the United States, other countries, or both.           

Intel, Intel Inside (logos), MMX and Pentium are trademarks of
Intel Corporation in the United States, other countries, or both.

Linux is a trademark of Linus Torvalds in the united states, other
countries, or both.

Microsoft and Windows are trademarks of Microsoft Corporation in 
the United States, other countries, or both.

Red Hat, the Red Hat "Shadow Man" logo, and all Red Hat-based
trademarks and logos are trademarks or registered trademarks of
Red Hat, Inc., in the United States and other countries.
         
Other company, product, or service names may be trademarks or
service marks of others.