           Central Point Anti-Virus for DOS Version 2.60
  
  This file contains information that is not in the manual or has changed
  since the manual was printed. Take a moment to read it.
  
  
  SIGNATURE UPDATES AND OTHER CENTRAL POINT PROGRAMS
  
  Signature updates improve the virus-detection capability of other
  Central Point Software programs that have virus-detection features
  (Central Point Backup, DiskFix, and Commute). However, the virus
  signatures used by Central Point Anti-Virus Version 2.0 are not
  compatible with these Central Point programs. Signatures using the
  previous format will continue to be made available on CompuServe and
  Central Point Software's BBS.
  
  INSTALL OPTIONS
  
  The following procedures are designed to be run from the directory
  where Install is located (by default, C:\CPAV) on your hard disk drive
  after you have performed the initial installation: 
      *    Creating an emergency disk 
      *    Changing Anti-Virus options 
      *    Creating a custom installation or installation set
  
  COMPATIBILITY NOTES
  
  Packard Bell Mouse Users
  
  The Packard Bell mouse driver version 4.0 is not fully compatible with
  the Microsoft mouse driver (version 6.14 or later). Use the Microsoft
  mouse driver (often provided with Windows) with this mouse.
  
  
  Speedstar 24X Video Board Users
  
  The 24XMODE.COM file is changed each time it is executed. To prevent
  verification alerts each time the driver is run, add this file to your
  Verification Exceptions list.
  
  
  Disk-Compression Software
  
  When scanning drives that have been compressed with the
  disk-compression utility SuperStor from AddStor, or drives that have
  been write-protected with PC Tools for DOS Data Monitor, leave the
  Anti-Stealth option off. On such compressed volumes, files are
  compressed and decompressed dynamically, which results in their
  checksums not matching. You may get unreliable verification errors.
  
  
  DOS 6 DoubleSpace Users
  
  You cannot format a DoubleSpace drive with PC Format. If you run PCFORM
  /S from any drive on a DoubleSpace system to create a bootable floppy,
  PC Format might return an error stating that system files cannot be
  found. This problem occurs if the DoubleSpace driver has fixed a
  corrupted boot sector when it is rebooted. Unfortunately, the
  DoubleSpace driver does not replace the normal signature of the entire
  boot record.
  
  To prevent such boot sector problems on a DoubleSpace drive, run
  BootSafe. BootSafe detects the changed boot record signature and alerts
  you. You can then choose Rebuild to repair the boot record completely.
  
  
  VSafe and QEMM or 386MAX 
  
  Some problems have been detected loading VSafe using the Stealth option
  in QEMM or the FLEXFRAME option in 386MAX. We do not recommend using
  either of these options if you are loading VSafe.
  
  If you get the message "386MAX VxD error V1014: Disk Cache or other
  file IO software using EMS memory" when using VSafe with 386MAX, load
  VSafe using the /NE option.
  
  
  VSafe and RAMBoost
  
  In order to load VSafe high automatically, you need the SMARTTSR option
  in the RAMBOOST.INI file. PC Tools Version 8.0a is shipping with this
  option enabled; however, if you use PC Tools Version 8.0, this option
  needs to be added. Insert this line in the RAMBOOST.INI file in the
  [SYSTEM] section:
  
  OPTION=SMARTTSR
  
  
  VSafe and other TSRs
  
  If you have VSafe loaded with the Resident Warning option (2) on, you
  may receive an error when another memory-resident program loads. If you
  choose Stop, the system may lock. Choose Continue to complete the
  startup process, then edit your AUTOEXEC.BAT file and turn off the
  Resident Warning option (2-).
  
  Generally, the only reason for not using the VSafe default options is
  if you think your system might be infected with a virus. If this is the
  case, boot your system from your write-protected emergency disk. Follow
  the instructions in the manual for using the emergency disk.
  
  
  VSafe and DESQview
  
  VSafe does not display a warning prompt when you are running a DOS
  program in graphics mode (such as DESQview), instead an alarm sounds
  and the action stops. Exit from the program and run Central Point
  Anti-Virus verify the integrity of files.

