Copyright ©2005 EMCOR Enclosures. All rights Reserved.
Manufacturer Manufacturer EMCOR Enclosures
Product Number Product Number KTAP-0319
Part Number Part Number
Product Description Product Description Keyboard Tray Access Panel
Purchase Date Purchase Date
Installed Date Installed Date
Warranty Exp Warranty Exp
Support Agreement Support Agreement
Support Contact Name Support Contact Name
Contact Phone Contact Phone
Comments Comments
Cost Cost
Asset Number Asset Number
Serial Number Serial Number
Location Location
Building Building
Room Room
Department Department
Overall Width Overall Width
Overall Height Overall Height
Overall Depth Overall Depth
Product Support Product Support www.emcorenclosures.com
￼
Show Equipment Label Hide Equipment Label
Product Number Product Number XPN-0519-V;XPN-0719-V;XPN-0819-V;XPN-1019-V;XPN-1219-V;XPN-1419-V;XPN-1519-V;XPN-1719-V;XPN-1919-V;XPN-2119-V;XPN-2219-V;XPN-2419-V;XPN-2619-V;XPN-2819-V;XPN-2919-V;XPN-3319-V XPN-0519-V
Product Description Product Description
Custom &Properties...
Product Number Product Number BL-125EG;BL-290EG;BL-300EG;BL-350EG;BL-500EG BL-125EG
Comments Comments 125 CFM
Copyright ©2007 EMCOR Enclosures. All rights Reserved.
Product Number Product Number FP2-B Plan
Product Description Product Description FP2 1 Bay
Rack Units Rack Units
Show Hide E&quipment Label
Enable Text &Label Editing
Product Number Product Number FP2-E Plan
Product Description Product Description FP2 19in Frame
Product Number Product Number M7B3202 Plan
Product Description Product Description Articulating Arm
Product Number Product Number WS2-Left Hand Surface
Product Description Product Description FP2 Left Hand Work Surface
Comments Comments semi-transparent
Product Number Product Number WS2-Straight Surface
Product Description Product Description FP2 Straight Work Surface
Product Number Product Number WS2-Right Hand Surface
Product Description Product Description FP2 Right Hand Work Surface
Dimensions Dimensions
Vis_PE.chm!#45579 Copyright (c) 2003 Microsoft Corporation. All rights reserved.
Properties...
_Reset Te&xt Position Controls.X2 Scratch.X1 Controls.Y2 Height
Precision
Show Units Units Display Don't Show Units;Show Units
Both Extension Lines Both;End only;Begin only;Neither
Rack Unit Label units
Product Number Product Number FP2-A Plan
Product Description Product Description FP2 Left Hand Leg
Product Number Product Number FP2 WK-30R
Product Description Product Description FP2 Reverse Wedge Kit
Product Number Product Number FP2 WK-30
Product Description Product Description FP2 Wedge Kit
Product Number Product Number FP2-C Plan
Product Description Product Description FP2 2Bay
General Tips:
It’s best to assemble the system from left to right starting with the leg. Then, glue a frame to the leg. Then, glue the next frame, etc.
When gluing wedges and frames that are off the vertical axis, first glue one end of the part to a connection point, then drag the other end to the second connection point
Once the base has been completed, add the work surfaces. Start with the ends, than add the wedges, then connect them with straight pieces. Again, glue the work surfaces that are off the vertical axis by gluing one end and then dragging the other end. Similarly, with the straight sections, glue one end to an end surface, then drag the other end to a wedge surface.
Glue an articulating arm support to the center connection point at the back of the frame. Then, glue the articulating arm at its pivot point to the support.