So you have connected your 48 into the network and you have assigned an IP address that will be used
as your management interface and your first task is to connect the marketing division and lan to one
of its interfaces.
So how do we do it.
Each interface each port on the 48 physical switchboard can have an IP address.
We can also use hardware switches or soft switches where we aggregate several ports into one IP address.
One interface where all traffic will broadcast to the different ports.
But for our purpose for our demo we will use internal five as our interface and assign an IP address
to it.
Let's do it.
We will call it marketing lan in the areas field it is a physical interface we are not using the virtual
interface we will use virtual interface later on.
As for its role it's a LAN interface All right.
So the addressing mode we will not get our IP address from a DSP.
We will assign it a IP address assign another IP address and assign 10 0 to the one with that 24 subnet.
So we will have two hundred and fifty four IP addresses available if we choose so to our marketing hosts.
The next thing to do is to configure which administrative access do we when do we want to use.
We can use Bing to check out if there is connectivity as admins but we will not allow anyone to get
into the interface using GDP or HDTV.
Yes we can also use as an MP and now we will enable the DCP server the DCP server which we will have
a dedicated video for the different services will allow us to allocate IP addresses to the different
members of our marketing plan.
It starts from the 10th of 0 2 or 2 up to the tender 0 the two the two hundred and fifty for the man.
That mask is twenty fourth Summit of 24 the different gateway is the same default gateway as the interface
ip which is the 10 zero to the one so any host in the land that will connect to that interface will
get a gateway of the ten that zero the two the one any traffic that is coming from the LAN will be forwarded
to that gateway we can use the same system DNS as in our 40 gig.
Or we can use a specific DNS such as the Google DNS.
Now we can also assign different options to our DCP server.
We can define the last time we can define more things we will do it later on device detection is always
good device detection and allows for a gate to understand which device is connected to the interface.
There is a crucial parameter if we want to use later on a device based policy.
If we want to allow for example only Android devices to get out to the Internet or block Mac devices
we can also use active scanning which is a method that 48 uses in the case that it doesn't recognize
the device at first we can use that mission control as a captive portal.
We will not use it this time we will use it later on.
So we have our interface that interface is dedicated to the marketing lab and the next thing to do is
to grab a switch connect every host on the marketing lan to that switch and connect that switch to our
interface to our new marketing LAN interface.
The next thing to do is to connect our marketing lan to our when interface the interface that goes to
the Internet to our ISP modem and then we will configure a static right that on our next two videos.