Most 48 devices comes from the factory with a default setting that is port.
One is already configured with the IP address of one eighty two one sixty eight one ninety nine with
the HP Service already running.
So make sure in your computer that you have in your network setting DCP enabled plug in your economic
cable to port one of your 48 and the other side to your ethernet connector.
Let's let's check out our network settings just to see if the is enabled or maybe we are using a static
IP address so let's check the properties of our network adapter
and it is already configured to obtain an IP address automatically using DSP.
We can also set up our computer to one 90 to 168 one and use another IP address from the pool let's
use 111 the subnet mask is a 24 subnet mask the default gateway is the 190 to 168 one one ninety nine.
And we can use just about any DNS server out there.
All right.
Now that was on a windows 7 machine.
It's an old operating system running on my virtual environment but you can do it on just about any platform
I can on my Mac go to network person.
Now it depends on your adapter since many Macs nowadays doesn't come with an Internet port on the device
itself.
So you probably will use an adapter where you can configure it manually or use the ACP.
Just be sure to be on the same subnet as the 1 and 2 168 1 0 subnet.
So the next thing to do is to track the address of port one into your you are real bar in your browser
can also see a fare icon of 48
and there it is the default settings which you should change is admin with no password that's as a security
expert.
You should change your admin user name and your admin password as soon as possible.