To help reinforce the concepts that we've taken a look at in this skill,
I've got a customer scenario for you and here it is.
The customer, they tried to implement load balancing with the following.
They have a virtual IP address,
they hopefully have a virtual IP address for HTTP services at this virtual IP
address.
That's over here, very similar to what we configured in the lab up to this
point.
Behind the scenes, they have a pool of servers over here at VLAN 5,
at .51, .52 and .53. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
at .51, .52 and .53.
So there's these three backend servers right here on VLAN 5.
However, after they configured it, unfortunately, when clients attempt to
connect to that virtual IP address
over here at 192.168.1.5,
the clients do not receive any of the content from those backend servers.
So here's what I invite you to do.
Take a look at the following screenshots regarding the current configuration at
the controller
and identify what you believe the problem is.
And then once you've had a chance to take a look at those screenshots WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
And then once you've had a chance to take a look at those screenshots
and determine what you feel the problem is or might be,
join me in the follow-up video and we'll walk through the scenario together.