So in this video, we're going to do the deployment of the controller for the
advanced load balancer.
So we're going to place it right here on SEG-103 ALB management.
And we're going to use the IP address of 10.103.0.15.
And for its default gateway, it'll use .1 right there.
So to deploy this OVF template for the controller, we're going to use the v
Sphere client.
So let's head over there right now.
So here in the vSphere client, we'll go ahead and right click on our data
center.
We can also right click on our cluster.
And then from the drop down, click here on deploy OVF template to deploy the WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
And then from the drop down, click here on deploy OVF template to deploy the
advanced load balancer controller.
So we'll click here on deploy OVF template.
Then I'll click on local file and click on upload files.
And I've got that file on my local computer.
So I selected this file controller 30.1.2, which is the version of the
controller that we're going to be deploying today.
And with that selected, we'll click on next.
So let's go ahead and call this our-alb controller.
And as far as where do we want to place it, I've got a folder called ALB. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
We'll put it right there.
We'll click on next.
And as far as who's the lucky computer resource, let's go ahead and pick on ES
Xi1 and click on next.
So I have some warnings about the certificate.
I'm going to go ahead and click on ignore all.
The product is AVI cloud controller.
And that was again the previous company before VMware acquired it.
It's showing us the download size, a little over 4GIG and the size on disk,
whether it's thin or thick provision.
Great, great, great.
So we'll click on next.
So I'm going to select the data store for it.
I'm going to select thin provisioning in my lab and click on next. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
I'm going to select thin provisioning in my lab and click on next.
So now for the management interface.
On this advanced load balancer, it's asking us which port group do you want to
connect it to?
So we're going to connect this to the port group associated with this segment
right here, which is SEG-103ALB management.
So we'll use the dropdown right here, click on browse.
And from the list, we'll scroll down.
There it is right there.
So we'll choose that segment.
That's a NSX based overlay segment right there.
And we'll click on OK.
And then we'll click on next.
And then it's going to proceed to ask us about all the details regarding the IP WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
And then it's going to proceed to ask us about all the details regarding the IP
address for the management interface, the mask, the default gateway.
If you're using IPv6, the IPv6 information and the default gateway.
And then as we continue to scroll down, there's a few more fields where it says
, please don't put anything here directly.
That's going to be used as part of the install.
So we'll scroll all the way down to make sure there's nothing else that we need
to put in.
So once we put in all the information that's required, including the management
IP address and so forth, we then click on next.
Now this process, I got to warn you, this process could take somewhere between WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
Now this process, I got to warn you, this process could take somewhere between
45 minutes and an hour and a half for it to be fully deployed and then fully
initialized.
It takes a lot of time.
So in the interest of time, let me go ahead and click on cancel for this
current install.
And let me share with you what I've already done.
I've already deployed the advanced load balancer controller. It is sitting
right here in this folder ready to go.
So it is currently connected to the correct network segment, SEG 103 ALB
management.
Here is the IP address 10.103.0.15 perfect, perfect, perfect, perfect. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
Here is the IP address 10.103.0.15 perfect, perfect, perfect, perfect.
And the benefit of having this all in place was the fact that I wouldn't have
to wait like an hour and a half before I picked up the recording again.
So I did this earlier using the exact steps that I just showed you.
[BLANK_AUDIO]