So, based on our game plan, our first step is to verify our topology,
specifically this
little Kali Linux box here on the 10 segment and also this Metasplodable system
.
I just want to document what their IP addresses are because at the moment, they
are both
acting as DHCP clients.
So as part of our verification, we'll also verify what their IP addresses are.
So from our vSphere client under VMs for testing, here's our Kali 10 box.
And I can also see here on the summary tab that it has the IP address 10, 10, 0
, 1, 84.
Let me open up a remote console there and let's also take a look at our Metaspl WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
Let me open up a remote console there and let's also take a look at our Metaspl
odable
box.
And now it's not running VMware tools.
So it's not showing here on the console what its IP address is, but let's also
open up
a remote console to our intentionally vulnerable Metasplodable 2 Linux box.
So let me bring over that console right here for the Kali 10 box.
So here's that console right here.
Let me make that a little bit bigger and let's just verify its IP address will
bring up a
command prompt.
Then we'll type IP address and there's it's address right there, 10, 10, 0, 1,
84, fantastic
or we could do an IF config for ethernet zero. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
or we could do an IF config for ethernet zero.
And that would also confirm for us.
It's 10, 10, 0, 1, 84.
That's also a ping over to 10 dot 20 dot 0 dot 1.
That's the gateway B's interface address that goes down to segment 20.
So we'll do a control C to stop that.
It's going to make sure we have connectivity over there.
And we do.
And now let's bring over my little intentionally vulnerable Linux box.
And this is the remote console for it right here.
So the default login is the username of MSF admin.
And the password is also MSF admin. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
And the password is also MSF admin.
So we'll log in.
So here let's do an IF config, compare my site, be address and it's IP address
is 10 dot
20 dot 0 dot 1.
82.
So on the left, our Kali box is 10, 10, 0, 1, 84 and our Metasplodable VM over
on segment
20 is at 10 dot 20 dot 0 dot 1.
82.
All right.
So I've got that documented.
Quick connectivity test list right here from our Metasplodable box.
Let's do a ping over to the IP address of our Kali Linux box, which is over at
10 dot
10 dot 0 dot 1. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
10 dot 0 dot 1.
84 press enter.
And that's looking good.
So our IP connectivity is currently in place and ready to rock.
And I'm going to add those addresses to our notes.
So this right here, the Kali Linux box is at dot 1.
84 on the 10 10 zero network and the Metasplodable version two system is over
at 10 dot 20 dot
at 182.
[BLANK_AUDIO]