Well, this skill was all about getting the certificates in place.
So hopefully we were able to get our lab ready to go so that we can start to
activate the
data plane because up until now it's been all about the other three planes of
operation,
the management plane, via the manager, the control plane, via controller, and
the orchestration
plane via the validator.
So just keep in mind a few things.
First of all, we do need to make sure that we're again using that admin login,
some form
of admin, depending on your setup, it might be a different username than admin
itself.
Just needs to be part of the admin group when we're adding devices to manager.
We also need to pick one or the other option for getting our root certificates
generated,
signed, and then installed back onto the devices.
And then that last very critical step is making sure that we enable the tunnel
ing on those
interfaces.
If we haven't done any of those processes, then we're not going to have our
controllers
established.
But when we log into SD-WAN manager at the end, we want to absolutely see that
we've got
all three devices online and operational there at the top left, and we can poke
around again
and see maybe if there's any problems, start to troubleshoot that and figure
out what's
going on there.
And as always, refer back to the steps that we went through in this skill if
needed in
order to make sure everything is working before we move on to the fun part,
which is getting
our edges online and that data plane starting to function.
I hope this has been informative for you and I'd like to thank you for viewing.