To reinforce the concepts and configuration we're going to nat and pat, here
are the lab tasks
I'd love you to do using the same topology that we've used up to this point in
the set of videos.
I'd like you to configure on our four as a address translation device. I'd like
you to configure
static nat for PC30 mapped to 23.1.2.51. Secondly, I'd like you to use a pool
of 23.1.2.65 through 126
with this last 26. And using that pool of addresses, I'd like you to set up
dynamic nat with a one-to-one
mapping for clients on the 1010-0/24 network. And that would include the PC at WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
mapping for clients on the 1010-0/24 network. And that would include the PC at
1010-050 for
testing purposes. And then for everybody else who has a source address of 10
anything,
I'd like you to go ahead and use pat with overload on our four as gig two slash
zero interface address.
And just as a reminder, there is a web server and also a DNS server sitting at
23.1.2.100,
which is the server one nug just sitting above our four. So you can use that as
a target. So with
that in mind, have some fun with the hands on the app and when you are done, WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
that in mind, have some fun with the hands on the app and when you are done,
join me for the next video
where we'll do a walkthrough of these tasks together.