What did one router say to the other one?
Oh man, I love the classics.
[MUSIC PLAYING]
And in this video, that's exactly the opportunity
I want to provide in the hands-on lab
is to do classic configuration for EIGRP for both IPv4
and IPv6.
Here is a reminder of the topology we'll
be working with right here.
So R1 through R8, they have no EIGRP configured whatsoever
for IPv4 or IPv6. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
for IPv4 or IPv6.
And when you launch the hands-on lab, which
I encourage you to do to get practice with it,
I also have a notepad document on the management computer,
DCNug, that has the syntax right there
if you want to refer to it or leverage it.
You're welcome to do that as well.
And just to confirm, here it is.
So we're going to do the classic IPv4 and classic IPv6.
Also I would encourage you, as you go through this, after you
implement it for IPv4 and IPv6, take a moment
and let's do some show commands.
How do you see the EIGRP interfaces? WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
How do you see the EIGRP interfaces?
So many of these commands we've had in a previous video,
previous set of videos, on EIGRP.
How do we see the neighbors?
How do we see the protocols?
And I'm referring to IPv4 and also IPv6.
And also, how about the topology table?
And that's a great one too, for both IPv4 and IPv6.
So that's your mission, should you
choose to accept it for this hands-on lab,
is to implement classic IPv4 and IPv6 EIGRP
and then run these commands for IPv4 and IPv6 WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
and then run these commands for IPv4 and IPv6
to get a feel for it.
And then in the next video, what we'll do
is we'll start off with a fresh lab once again,
but what we'll do is we'll do named configuration
mode for IPv4 and IPv6 and that way you can have
a before and after experience.
So the goal here is that no matter what type of scenario
we are thrown into for troubleshooting we
can say, oh yeah, I understand the basic mechanics of how
to work with this and how to configure it
with both classic mode as well as name mode.
So that's the lab.
Let me go and put back the topology
because you'll want to take a look at the topology WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
because you'll want to take a look at the topology
while you're working.
Also, I've discovered that if you're
working with a topology like this,
it's often good to have two monitors where you can have
the topology on one monitor and then your lab on the other
or maybe on a tablet, where you can have the topology,
you can see it.
That we can see it and work with it at the same time instead
of having to go back and forth.
So only this screen up as you work on the lab,
and I'll see you in the next lab where
we'll take a look at named EIGRP configuration involving address
families.
Until then, I hope this has been informative for you
and I'd like to thank you for viewing. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000
and I'd like to thank you for viewing.