If local system doesn't configure any network interface for the adapter that are necessary to create the network config file to bring up interface.
- For example in sles15sp1, To create ifcfg-ethX files under /etc/sysconfig/network/.
Additional Information:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe (or) chmod +x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
Remote Online:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
If local system doesn't configure any network interface for the adapter that are necessary to create the network config file to bring up interface.
- For example in sles15sp1, To create ifcfg-ethX files under /etc/sysconfig/network/.
This command will extract the contents to "/usr/lib/x86_64-linux-gnu."
The CP058228.scexe script is located in the "scexe-compat'' folder. Further information is available in CP058228.txt file in the "firmware-nic-*" folder. The actual name of the "firmware-nic-*" folder is based on the version of the rpm to be installed.
Updating adapter firmware without installing the rpm:
This will extract the contents of the rpm to the "usr" folder in the current directory.
Additional Information:
]]>
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | CCM Version | RoCE Version |
|---|---|---|---|---|---|---|
| HPE Ethernet 10Gb 2-port 535FLR-T Adapter | 214.4.91.1 |
214.4.42.1 |
214.0.241.0 |
214.0.305.0 |
216.0.52.1 |
214.0.194.0 |
| HPE Ethernet 10Gb 2-port 535T Adapter | ||||||
| HPE Ethernet 10/25Gb 2-port 631FLR-SFP28 Adapter | ||||||
| HPE Ethernet 10/25Gb 2-port 631SFP28 Adapter | ||||||
| HPE Ethernet 10Gb 2-port 537SFP+ Adapter | ||||||
| HPE Ethernet 10Gb 2-port 537SFP+ FLR Adapter |
NOTE: Updated utilities and system libraries are required to support the iLO
HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility
does not currently support the CNSA security state.
iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/go/ilo
Select your lights-out product, then support & documents, then manuals.
NOTE: Updated utilities and system libraries are required to support the iLO
HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility
does not currently support the CNSA security state.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/go/ilo
Select your lights-out product, then support & documents, then manuals.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
NOTE: Updated utilities and system libraries are required to support the iLO
HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility
does not currently support the CNSA security state.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \packages on the USB key.
Update the firmware and software in the usual manner.
iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo
Select your lights-out product, then support & documents, then manuals.
Additional Information:
To use HPE Smart Update Manager from the Service Pack for ProLiant :
Release Version and/or Date:
1.0.14.1063
Last Recommended or Critical Version:
1.0.14.1063
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use HPE Smart Update Manager from the Service Pack for ProLiant :
]]>