http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.09.00.a8_k1-1.rhel9u1.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Additional Information:
Click the Install button to proceed with the installation.
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
IMPORTANT UPDATE: SSA (GUI) for Linux can now be run without requiring the System Management Homepage. SSA now supports a Local Application Mode for Linux. The System Management Homepage is still supported, but no longer required to run the SSA GUI.
To invoke, enter the following at the command prompt:
ssa -local
The command will start SSA in a new Firefox browser window. When the browser window is closed, SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.
]]>
# ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
Updating firmware without installing the rpm:
Additional Information:
| NIC | EEPROM/NVM Version | OROM Version | Single NVM Version |
|---|---|---|---|
| HPE Ethernet 1Gb 2-port 361T Adapter | 80001147 | 1.3437.0 | N/A |
| HPE Ethernet 1Gb 4-port 366FLR Adapter | 800011A1 | 1.3437.0 | N/A |
| HPE Ethernet 1Gb 4-port 366T Adapter | 800011F1 | 1.3437.0 | N/A |
| HPE Ethernet 1Gb 2-port 368i Adapter | 80003AC5 | 1.3437.0 | N/A |
| HPE Ethernet 1Gb 2-port 368FLR-MMT Adapter | 80003AC2 | 1.3437.0 | N/A |
| HPE Ethernet 1Gb 4-port 369i Adapter | 80003AC3 | 1.3437.0 | N/A |
| HPE Ethernet 10Gb 2-port 568i Adapter | 80003AC4 | 1.3437.0 | N/A |
| HPE Ethernet 10Gb 2-port 568FLR-MMSFP+ Adapter | 80003AC2 | 1.3437.0 | N/A |
| HPE Ethernet 10Gb 2-port 568FLR-MMT Adapter | 80003AC2 | 1.3437.0 | N/A |
| HPE Ethernet 10Gb 2-port 563i Adapter | 800035C0 | 1.3437.0 | N/A |
| HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter | 8000E3EC | 1.3437.0 | 11.1.5 |
| HPE Ethernet 10Gb 2-port 562FLR-T Adapter | 800016F1 | 1.3437.0 | 10.55.3 |
| HPE Ethernet 10Gb 2-port 562SFP+ Adapter | 8000E3EB | 1.3437.0 | 11.1.5 |
| HPE Ethernet 10Gb 2-port 562T Adapter | 800016EF | 1.3437.0 | 10.55.3 |
The combo image v1.3437.0 includes: Boot Agent: 1GbE - v1.5.90, 10GbE - v2.4.51, 40GbE - v1.1.44 & UEFI Drivers: 1GbE - v9.8.33, 10GbE - v8.2.13, 40GbE - v4.9.70
The combo image v1.3380.0 includes: Boot Agent: 1GbE - v1.5.89, 10GbE - v2.4.45, 40GbE - v1.1.42 & UEFI Drivers: 1GbE - v9.8.24, 10GbE - v8.2.06, 40GbE - v4.9.49
The combo image v1.1375.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46, 40GbE - v1.0.21 & UEFI Drivers: 1GbE - v6.9.13, 10GbE - v5.0.20, 40GbE - v1.5.14
Single NVM Version is new firmware format which represent an unified version in place of the previously used EEPROM/NVM Version or OROM version.
This software package no longer contains Firmware for the below listed supported network adapters:
HPE Ethernet 1Gb 2-port 361i Adapter
HPE Ethernet 1Gb 2-port 363i Adapter
HPE Ethernet 1Gb 4-port 366i Adapter
HPE Ethernet 1Gb 4-port 366i Communication Board
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
HPE Ethernet 10Gb 2-port 560SFP+ Adapter
HPE Ethernet 10Gb 2-port 561FLR-T Adapter
HPE Ethernet 10Gb 2-port 561T Adapter
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
Be noted that it needs the minimum version(combo image v8.55.12) for this firmware package, please refer to the following link to update firmware first.
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_c924ae49269f4d53b93dbb5ac5
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_829c3c2d15a641eeba5aebd3a2
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_117b0672d7ef4c5bb0eca02886
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
This product contains driver version 1.11.2.0.
]]>To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Release Version and/or Date:
1.79(C)
Last Recommended or Critical Version:
1.79(C)
Previous Version of Firmware:
1.78(A)
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Drive may show up missing after a system reboot.
Known Issues:
None
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>Additional Information:
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.520.3-1.rhel9u1.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
Additional Information:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.09.00.a8_k1-1.rhel9u2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>To use HPE Smart Update Manager from the Service Pack for ProLiant :
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter | 8001AF27 | 1.3429.0 | 4.30 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.3
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi 7.x operating system on target server:
chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK Adapter for HPE | 8001AF2A | 1.3429.0 | 4.31 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.2
]]># ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
This command will extract the contents to "/usr/lib/x86_64-linux-gnu."
The CPXXXXXX.scexe script is located in the "scexe-compat'' folder. Further information is available in CPXXXXXX.txt file in the "firmware-nic-*" folder. The actual name of the "firmware-nic-*" folder is based on the version of the rpm to be installed.
Updating adapter firmware without installing the rpm:
This will extract the contents of the rpm to the "usr" folder in the current directory.
Additional Information:
]]>
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| HPE Ethernet 10Gb 2-port 535FLR-T Adapter | 227.0.131.0 |
227.0.134.0 |
227.0.133.0 |
227.0.133.0 |
227.0.134.0 |
| HPE Ethernet 10Gb 2-port 535T Adapter | |||||
| HPE Ethernet 10/25Gb 2-port 631FLR-SFP28 Adapter | |||||
| HPE Ethernet 10/25Gb 2-port 631SFP28 Adapter | |||||
| HPE Ethernet 10Gb 2-port 537SFP+ Adapter | |||||
| HPE Ethernet 10Gb 2-port 537SFP+ FLR Adapter |
NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
http://www.hpe.com/storage/spock/
The target environment must have the libHBAAPI Package installed prior to the installation of the firmware as the discovery of adapters might not complete without the library. (If not already present, the libHBAAPI Package can be obtained from the operating system installation media.)
Additional requirements:
Environment must be running the syslog daemon for the flash engine to run
Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex Host Bus Adapters(HBAs)
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 | 8001AF22 | 1.3429.0 | 4.30 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.3
]]>Refer to VMware documentation for information on the esxcli commands
]]>http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-14.2.589.5_k5.14.21_150400.22-1.sles15sp4.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm --reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
Additional Information:
To update the driver using VMware tools:
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.09.00.a8_k1-1.rhel8u7.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64
To use Smart Update Manager from the Service Pack for ProLiant:
Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>On the Web-based Management Device Homepage, under "options", "Anonymous Access" should be enabled when using SSA.
When clicking on a controller that is currently being configured in a different SSA session, a message will appear which allows you to override the other SSA session or cancel. If you choose to override the other SSA session, any unsaved changes in the other session will be discarded.
To uninstall SSA, use Add/Remove Programs located in the Control Panel on Windows Systems.
To run SSA in local application mode on Windows, Internet Explorer must be the default browser.
The following are known issues:
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>* The previous web release kmod-igb-5.14.16-1.rhel8u8.x86_64.rpm is unpublished (This generic binary RPM is the same with kmod-hp-igb version 6.14.16）
- The RPM package name was changed from (hp-igb) to (igb). Now we revert this change from (igb) to (hp-igb).
- The new RPM release is deferred to next new OS major release
* kmod-hp-igb and kmod-igb are different RPM package for OS. They can be together installed in the same time.
To avoid confusion, if you already download and install kmod-igb-5.14.16-1.rhel8u8.x86_64.rpm, please uninstall the previous RPM by #rpm -e kmod-igb and then install the updated RPM.
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>
Users have to install hpe-auxiliary driver before installing this product for rhel8.2/8.3/8.4 components.
Download page:
]]>Click the "Install" button to proceed with the installation.]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Click the "Install" button to proceed with the installation.]]>
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
Be noted that it needs the minimum version(combo image v8.55.12) for this firmware package, please refer to the following link to update firmware first.
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_7761c1b3fae845228e5a11aacf
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_1f7a14b7d04142f0b04ecb9c03
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_45bde9430773406fb2b796799e
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>amsd only supported on HPE Gen10/Gen10 Plus Servers and later Server Generations.
amsd provides information to the iLO 5 and iLO 6 service providing SNMP support.
]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 12 service pack 5 has to be performed using –force or --replacepkgs with --nodeps option
Example: rpm –Uvh HPE-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm --force --nodeps
rpm –Uvh HPE-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm --replacepkgs --nodeps
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-2CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter | 8001AF25 | 1.3429.0 | 4.30 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.3
]]>http://www.hpe.com/storage/spock/
The target environment must have the libHBAAPI Package installed prior to the installation of the firmware as the discovery of adapters might not complete without the library. (If not already present, the libHBAAPI Package can be obtained from the operating system installation media.)
The HPE supplied enablement kit must be installed prior to this firmware component being identified by SUM for deployment.
It is advised to provide read-write permissions on /var/tmp folder. Firmware deployment via Service Pack for ProLiant(SPP) might be unsuccessful in some cases , if read-write(rw) permissions are not enable on /tmp or /var/tmp directories.
NOTE: During the flash operation, the message "No Adapter Found!" may appear in the logs. These messages do not indicate a problem with the firmware flash operation and may be ignored.
It is advised to provide read-write permissions on /var/tmp folder. Firmware deployment via Service Pack for ProLiant(SPP) might be unsuccessful in some cases , if read-write(rw) permissions are not enable on /tmp or /var/tmp directories.
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>ssaducli -f adu-report.zip
To generate a SmartSSD Wear gauge report, enter the following command:
ssaducli -ssdrpt -f ssd-report.zip
More options can be found by "ssaducli -help".
Additional Notes
----------------
Both the diagnostic and SmartSSD wear gauge reports are generated in compressed
(ZIP) format.
The diagnostic report output archive contains the following files:
* ADUReport.txt => Diagnostic report in text format
* ADUReport.xml => Diagnostic report in XML format
* ADUReport.htm => HTML viewer for diagnostic report
* report.checksum => checksum file
* SlotX.txt (SlotX.old) => Controller serial output log
Note: The serial output log file(s) are only available if the "HPE Smart
Array SAS/SATA Event Notification Service" is installed and running.
To view the diagnostic report in a browser, extract the ADUReport.htm. Open
ADUReport.htm in the browser.
The SmartSSD wear gauge report output archive contains the following files:
* SmartSSDWearGaugeReport.txt => SmartSSD wear gauge report in text format
* SmartSSDWearGaugeReport.json => SmartSSD wear gauge report in JSON format
* SmartSSDWearGaugeReport.htm => HTML viewer for the JSON wear gauge report
To view the SmartSSD wear gauge report in a browser, extract the
SmartSSDWearGaugeReport.json, SmartSSDWearGaugeReport.htm files to a
directory (both files must reside in the same directory). Open
SmartSSDWearGaugeReport.htm in the browser.
Known Issues
------------
* When installing the 32-bit version of SSADUCLI on a system that has a
64-bit (x64) version of SSADUCLI installed, please uninstall the 64-bit
version first. Failing to uninstall the 64-bit version will cause the 32-bit
installation to fail.
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
Click the "Install" button to proceed with the installation.]]>
http://www.hpe.com/storage/spock/
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
]]>This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 12 service pack 5 has to be performed using –force or --replacepkgs with --nodeps option
Example: rpm –Uvh HPE-CNA-FC-hpeqlgc-Enablement-Kit-<version>.noarch.rpm --force --nodeps
rpm –Uvh HPE-CNA-FC-hpeqlgc-Enablement-Kit-<version>.noarch.rpm --replacepkgs --nodeps
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 15 service pack 4 and SuSE Linux Enterprise Server 15 service pack 5 has to be performed using --reinstall option
Example: rpm –Uvh HPE-CNA-FC-hpeqlgc-Enablement-Kit-<version>.noarch.rpm --force --nodeps
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.589.5-1.rhel8u8.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
Click the "Install" button to proceed with the installation.]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]># ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
Additional Information:
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version |
| BCM 5719 1GbE 4p BASE-T Adptr | 1.48 | 21.6.2 | 1.5.49 | 21.6.66 |
| BCM 5719 1GbE 4p BASE-T OCP3 Adptr | 1.48 | 21.6.2 | 1.5.49 | 21.6.66 |
| BCM 5719 1GbE 4p BASE-T LOM Adptr | 1.48 | 21.6.2 | 1.5.49 | 21.6.66 |
| BCM 5720 1GbE 2p BASE-T LOM Adptr | 1.42 | 21.6.2 | 1.5.49 | 21.6.66 |
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
This product contains driver version 1.11.3.0.
]]>This method works if this component is already installed on the ESXi host and is running in the Auto mode.
Refer Server updates through iLO 5 in SUM User Guide
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.577.2-1.rhel8u6.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>* The previous web release igb-kmp-default-5.14.16_k5.14.21_150500.53-1.sles15sp5.x86_64.rpm is unpublished (This generic binary RPM is the same with hp-igb-kmp-default version 6.14.16）
- The RPM package name was changed from (hp-igb-kmp-default) to (igb-kmp-default). Now we revert this change from (igb-kmp-default) to (hp-igb-kmp-default).
- The new RPM release is deferred to next new OS major release
* hp-igb-kmp-default and igb-kmp-default are different RPM package for OS. They can be together installed in the same time.
To avoid confusion, if you already download and install igb-kmp-default-5.14.16_k5.14.21_150500.53-1.sles15sp5.x86_64.rpm, please uninstall the previous RPM by #rpm -e igb-kmp-default and then install the updated RPM.
Remote Online:
To update the driver using VMware tools:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter | 8001AF23 | 1.3429.0 | 4.30 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.3
]]>Click the Install button to proceed with the installation.
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.09.00.a8_k1-1.rhel8u8.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64
http://www.hpe.com/storage/spock/
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>Commands can also be executed from outside the SSA CLI console using the syntax: ssacli
Type "ssacli help" or type "help" at the CLI prompt for usage details.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.
]]>Extract the rpm file using the command ‘rpm2cpio <filename> | cpio –idmv’
Navigate to /usr/lib/x86_64-linux-gnu/firmware-ilo5-ri11-1.40-1.1
Run the ‘hpsetup’ file using the command ./hpsetup or ./hpsetup –f when updating to same version
To install the Linux Smart Components perform the below steps
Extract the RPM file and navigate to /usr/lib/x86_64-linux-gnu.
To use the Set up file, navigate to firmware-ilo5-2.xx-1.1 folder and run the same.
To use .scexe files, navigate to hp-scexe-compat or scexe-compat folders and run the same.
iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
Updating firmware without installing the rpm:
Additional Information:
| NIC | EEPROM/NVM Version | OROM Version | NVM Version |
|---|---|---|---|
| HPE Ethernet 10Gb 2-port SFP+ OCP3 X710-DA2 Adapter | 8000E5DB | 1.3429.0 | 9.30 |
| HPE Ethernet 10Gb 2-port SFP+ X710-DA2 Adapter | 8000E5EC | 1.3429.0 | 9.30 |
| Intel I350-T4 Ethernet 1Gb 4-port BASE-T Adapter | 800011F8 | 1.3429.0 | N/A |
| Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter | 800011EF | 1.3429.0 | N/A |
| Intel(R) I350 Gigabit Network Connection (2-port) | 8000119C | 1.3429.0 | N/A |
| Intel(R) I350 Gigabit Network Connection (4-port) | 8000119D | 1.3429.0 | N/A |
The combo image v1.3429.0 includes: Boot Agent: 1GbE - v1.5.90, 10GbE - v2.4.51, 40GbE - v1.1.44 & UEFI Drivers: 1GbE - v9.8.33, 10GbE - v8.2.13, 40GbE - v4.9.70
]]>Refer to VMware documentation for information on the esxcli commands
]]># ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
Additional Information:
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version |
| HPE Ethernet 1Gb 2-port 330i Adapter (22BD) | 2.10 | 21.6.2 | 1.5.49 | 21.6.66 |
| HPE Ethernet 1Gb 4-port 331i Adapter (22BE) HPE Ethernet 1Gb 4-port 331FLR Adapter HPE Ethernet 1Gb 4-port 331T Adapter |
1.48 | 21.6.2 | 1.5.49 | 21.6.66 |
| HPE Ethernet 1Gb 2-port 332i Adapter (22E8) HPE Ethernet 1Gb 2-port 332T Adapter |
1.42 | 21.6.2 | 1.5.49 | 21.6.66 |
For previous firmware versions prior to v20.19.51, please refer to the link : https://www.hpe.com/global/swpublishing/MTX-8670e218f6e948fe83fd64345c
]]>
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.10.00_k1_k5.14.21_150400.22-1.sles15sp5.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --reinstall option
Example: rpm –Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm --reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 15 service pack 4 and SuSE Linux Enterprise Server 15 service pack 5 has to be performed using --reinstall option
Example: rpm –Uvh HPE-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm --reinstall
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
# ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
Additional Information:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-14.2.520.3_k5.14.21_150500.37-1.sles15sp5.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm --reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
T
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>Users have to install hpe-auxiliary driver before installing this product for sles15sp2/sp3 components.
Download page:
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX-72dcb598f8b94e4d8385c7fa1d
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>amsd only supported on HPE Gen10/Gen10 Plus Servers.
amsd provides information to the iLO 5 service providing SNMP support.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE | 227.0.131.0 |
227.0.134.0 |
227.0.133.0 |
227.0.133.0 |
227.0.134.0 |
| Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE |
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter | 8001AF35 | 1.3429.0 | 4.30 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.3
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter | 8001AF24 | 1.3429.0 | 4.30 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.3
]]>amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.
amsd provides information to the iLO 5 and iLO 6 service providing SNMP support.
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
Be noted that it needs the minimum version(NVM Image version 216.0.333011) for this firmware package, please refer to the following link to update firmware first.
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_c9c99d62694e4a6aa418b0a781
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_2502ce87e3ba481081daea7a6c
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_0d5f5f72693848838710781e5e
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| HPE Ethernet 10Gb 2-port 535FLR-T Adapter | 227.0.131.0 |
227.0.134.0 |
227.0.133.0 |
227.0.133.0 |
227.0.134.0 |
| HPE Ethernet 10Gb 2-port 535T Adapter | |||||
| HPE Ethernet 10/25Gb 2-port 631FLR-SFP28 Adapter | |||||
| HPE Ethernet 10/25Gb 2-port 631SFP28 Adapter | |||||
| HPE Ethernet 10Gb 2-port 537SFP+ Adapter | |||||
| HPE Ethernet 10Gb 2-port 537SFP+ FLR Adapter |
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>Updating firmware without installing rpm:
| InfiniBand Card Type | Firmware Version | PSID |
| HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter (843400-B21) | 12.28.2006 |
HPE2920111032 |
| HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter (872723-B21) | 16.35.3006 | HPE0000000017 |
| HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter (872725-B21) | 16.35.3006 | HPE0000000008 |
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>Additional Information:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>To update the driver using VMware tools:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.09.00.a8_k1_k4.12.14_120-1.sles12sp5.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --force or --replacepkgs with --nodeps option
Example: rpm –Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm --force --nodeps
rpm –Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm --replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>The file name and RPM metadata is updated to the generic statement which adds support to update pci.ids. The device name appears at #lspci will be updated.
Starting from i40e v.2.19.3, it depends on auxiliary bus driver. Users have to install hpe-auxiliary driver before installing this product for rhel8.2/8.3/8.4 components. Download page: https://support.hpe.com/connect/s/softwaredetails?softwareId=MTX_bc71537c2589430cbd8b3cd699&language=en_US
http://www.hpe.com/storage/spock/
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>To update the driver using VMware tools:
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.559.0-1.rhel9u2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.
]]>iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
This method works if this component is already installed on the ESXi host and is running in the Auto mode.
Refer Server updates through iLO 5 in SUM User Guide
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>Additional Information:
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-14.2.520.3_k4.12.14_120-1.sles12sp5.x86_64.rpm
4.When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --force or --replacepkgs with --nodeps option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm --force --nodeps
rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm --replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>To update the driver using VMware tools:
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.10.00_k1_k5.3.18_57-2.sles15sp4.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --reinstall option
Example: rpm –Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm --reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Click the "Install" button to proceed with the installation.]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.
amsd provides information to the iLO 5 and iLO 6 service providing SNMP support.
Remote Online:
To update the driver using VMware tools:
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter | 8001AF29 | 1.3429.0 | 4.30 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.3
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>1. To flash this firmware package, use the following iLOrest command. See iLO Restful Interface tool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| HPE Ethernet 10Gb 2-port SFP+ BCM57412 Adapter | 227.0.131.0 |
227.0.134.0 |
227.0.133.0 |
227.0.133.0 |
227.0.134.0 |
| HPE Ethernet 10Gb 2-port SFP+ BCM57412 OCP3 Adapter | |||||
| HPE Ethernet 10Gb 2-port BaseT BCM57416 Adapter | |||||
| HPE Ethernet 10Gb 2-port BaseT BCM57416 OCP3 Adapter | |||||
| HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter | |||||
| HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter |