| AnyConnect Secure Mobility Client 5.0.05040

- Main Page
- Related Pages
- Classes
- Files

- File List
- File Members

Defines | Enumerations

# include/api.h File Reference

`#include "GlobalEnums.h"`

Go to the source code of this file.

## Defines
#define | UNICODE
#define | _UNICODE
#define | tstring std::wstring
#define | tostream std::wostream
#define | VPN_VPNAPI __declspec(dllimport)
#define | OUT
#define | IN
## Enumerations
enum | MessageType { MsgType_Error, MsgType_Alert, MsgType_Warn, MsgType_Info, MsgType_Status, MsgType_UrlError, MsgType_Announcement, MsgType_Ephemeral_Alert }
enum | SDITokenType { SDITT_NONE, SDITT_HARDWARE, SDITT_SOFTWARE }
enum | VPNState { CONNECTED = STATE_CONNECTED, DISCONNECTED = STATE_DISCONNECTED, CONNECTING = STATE_CONNECTING, DISCONNECTING = STATE_DISCONNECTING, RECONNECTING = STATE_RECONNECTING, PAUSING = STATE_PAUSING, PAUSED = STATE_PAUSED, SSOPOLLING = STATE_SSOPOLLING, UNKNOWN = ~0 }
enum | VPNSubState { VPNSS_NORMAL = VCSS_NORMAL, VPNSS_INDEFINITE_DELAY = VCSS_INDEFINITE_DELAY, VPNSS_SESSION_EXPIRING = VCSS_SESSION_EXPIRING, VPNSS_MT_DISCONNECTED_DISABLED = VCSS_MT_DISCONNECTED_DISABLED, VPNSS_MT_DISCONNECTED_TRUSTED_NW = VCSS_MT_DISCONNECTED_TRUSTED_NW, VPNSS_MT_DISCONNECTED_USER_TUNNEL_ACTIVE = VCSS_MT_DISCONNECTED_USER_TUNNEL_ACTIVE, VPNSS_MT_DISCONNECTED_LAUNCH_FAILED = VCSS_MT_DISCONNECTED_LAUNCH_FAILED, VPNSS_MT_DISCONNECTED_CONNECT_FAILED = VCSS_MT_DISCONNECTED_CONNECT_FAILED, VPNSS_MT_DISCONNECTED_BAD_VPN_CONFIG = VCSS_MT_DISCONNECTED_BAD_VPN_CONFIG, VPNSS_MT_DISCONNECTED_SW_UP_PENDING = VCSS_MT_DISCONNECTED_SW_UP_PENDING, VPNSS_MTU_ADJUSTMENT_PENDING = VCSS_MTU_ADJUSTMENT_PENDING }
enum | WMHint { MINIMIZE, OPEN, QUIT, REFRESHHOSTNAMES, REFRESHPREFS, SHOWCONNECTING, CLOSECREDENTIALPOPUP }
enum | WMHintReason { SECONDGUISTART, PROXYREQUEST, SERVICEFAILURE, DISCONNECT, SERVICESTOPPED, CONNECT, REASONUNKNOWN }
enum | ConnectPromptType { CERTIFICATE, CREDENTIALS, PROXY, MANUAL_PKCS12_IMPORT, STATUS, SINGLESIGNON, SINGLELOGOUT, LEGACY_SINGLESIGNON }
enum | PromptType { Prompt_Input, Prompt_Password, Prompt_Banner, Prompt_Combo, Prompt_Header, Prompt_Hidden, Prompt_CheckBox, Prompt_SSO }
enum | PreferenceId { ServiceDisable, CertificateStoreOverride, CertificateStore, CertificateStoreMac, CertificateStoreLinux, ShowPreConnectMessage, AutoConnectOnStart, MinimizeOnConnect, LocalLanAccess, DisableCaptivePortalDetection, AutoReconnect, AutoReconnectBehavior, SuspendOnConnectedStandby, UseStartBeforeLogon, AutoUpdate, RSASecurIDIntegration, WindowsLogonEnforcement, WindowsVPNEstablishment, LinuxLogonEnforcement, LinuxVPNEstablishment, ProxySettings, AllowLocalProxyConnections, PPPExclusion, PPPExclusionServerIP, AutomaticVPNPolicy, TrustedNetworkPolicy, UntrustedNetworkPolicy, BypassConnectUponSessionTimeout, TrustedDNSDomains, TrustedDNSServers, TrustedHttpsServerList, DisableUntrustedInterfaces, AlwaysOn, ConnectFailurePolicy, AllowCaptivePortalRemediation, CaptivePortalRemediationTimeout, ApplyLastVPNLocalResourceRules, AllowVPNDisconnect, AllowedHosts, EnableScripting, TerminateScriptOnNextEvent, EnablePostSBLOnConnectScript, AutomaticCertSelection, RetainVpnOnLogoff, UserEnforcement, DeviceLockRequired, DeviceLockMaximumTimeoutMinutes, DeviceLockMinimumPasswordLength, DeviceLockPasswordComplexity, EnableAutomaticServerSelection, AutoServerSelectionImprovement, AutoServerSelectionSuspendTime, AuthenticationTimeout, SafeWordSofTokenIntegration, AllowIPsecOverSSL, ClearSmartcardPin, IPProtocolSupport, CaptivePortalRemediationBrowserFailover, AllowManualHostInput, BlockUntrustedServers, PublicProxyServerAddress, CertificatePinning, UnknownPreference }
enum | PreferenceScope { User, Global, UserAndGlobal }
enum | OperatingMode { FIPS = (1 << 0), StartBeforeLogon = (1 << 1), GUI = (1 << 2), TrustedNetworkDetection = (1 << 3), AlwaysOnVpn = (1 << 4), NetworkIssue = (1 << 5), Quarantined = (1 << 6), AutomaticHeadendSelection = (1 << 7), DisconnectAllowed = (1 << 8), VPNDisabled = (1 << 9), SCEPMode = (1 << 10), OnTrustedNetwork = (1 << 11), ManualHostInputAllowed = (1 << 12), ErrorSuppressed = (1 << 13), StrictMode = (1 << 14), CLI = (1 << 15), Management = (1 << 16) }
enum | VPNError { VPNSuccess = 0, VPNError_Generic_FatalError = 1, VPNError_Connection_Error = 100, VPNError_Connection_InvalidGroupURL, VPNError_Network_Error = 200, VPNError_Authentication_Error = 300, VPNError_Authentication_DAP_Terminate, VPNError_ClientCertificate_UnknownError = 400, VPNError_ClientCertificate_Missing, VPNError_ClientCertificate_Expired, VPNError_ClientCertificate_NotYetValid, VPNError_ServerCertificate_UnknownError = 500, VPNError_ServerCertificate_Expired, VPNError_ServerCertificate_NotYetValid }
enum | CertAuthMode { CertAuth_Automatic, CertAuth_Disabled, CertAuth_Manual }
enum | CertificateType { CertificateType_Client, CertificateType_SystemTrusted, CertificateType_Server }
enum | CertConfirmReason { CertConfirmReason_Unspecified, CertConfirmReason_NameMismatch, CertConfirmReason_Expired, CertConfirmReason_NotValidYet, CertConfirmReason_UntrustedSource, CertConfirmReason_InvalidUse, CertConfirmReason_Revoked, CertConfirmReason_Malformed, CertConfirmReason_NotFipsCompliant, CertConfirmReason_InvalidateDate, CertConfirmReason_SignatureAlgorithm, CertConfirmReason_KeySize }
enum | UserResponseError { UserResponseError_None, UserResponseError_Unspecified, UserResponseError_BadServerCert, UserResponseError_SsoNavigation, UserResponseError_SsoGettingCookie, UserResponseError_SsoTimeout, UserResponseError_SsoMissingDependency, UserResponseError_SsoClientCertRequest, UserResponseError_SsoAborted }
enum | ClientType { ClientType_GUI, ClientType_GUI_SBL, ClientType_CLI, ClientType_MGMT }

## Detailed Description

This file contains some basic compiler definitions as well as common enums.

## Define Documentation

#define tstring std::wstring

std::wstring my wstring description

## Enumeration Type Documentation

enum CertAuthMode

Enumerator:

  CertAuth_Automatic | Will try each available certificate in succession until authentication is obtained or we run out of available certificates
  CertAuth_Disabled | Will disable Certificate Based Authentication
  CertAuth_Manual | Will only use preconfigured certificate to attempt Certificate Based Authentication

    {
        CertAuth_Automatic, /**< Will try each available certificate in succession
                                 until authentication is obtained or we run out of
                                 available certificates */
        CertAuth_Disabled,  /**< Will disable Certificate Based Authentication */
        CertAuth_Manual     /**< Will only use preconfigured certificate to attempt
                                 Certificate Based Authentication */
    };

enum ConnectPromptType

provides an indication of the type of credential data being requested.

Enumerator:

  CERTIFICATE | Indicates a certificate-only type of connection and would not normally be sent to client unless a post-authentication banner is to be displayed.
  CREDENTIALS | Indicates that the user is to be prompted for authentication credentials
  PROXY | Indicates that the user is to be prompted for proxy-authentication credentials
  MANUAL_PKCS12_IMPORT | Indicates that the user is to be prompted for passwords related to PKCS12 import
  STATUS | Indicates that status messages are to be displayed to the user
  SINGLESIGNON | Indicates an embedded browser based single sign-on authentication method is requested.
  SINGLELOGOUT | Indicates an embedded browser based single sign-on authentication logout is requested.
  LEGACY_SINGLESIGNON | (deprecated) Indicates a browser based single sign-on authentication method is requested.

    {
        CERTIFICATE,    /**< Indicates a certificate-only type of connection and
                             would not normally be sent to client unless a
                             post-authentication banner is to be displayed. */
        CREDENTIALS,    /**< Indicates that the user is to be prompted for authentication
                             credentials */
        PROXY,          /**< Indicates that the user is to be prompted for
                             proxy-authentication credentials */
        MANUAL_PKCS12_IMPORT, /**< Indicates that the user is to be prompted for passwords related
                                  to PKCS12 import*/
        STATUS,         /**< Indicates that status messages are to be displayed to
                             the user*/
        SINGLESIGNON,   /**< Indicates an embedded browser based single sign-on authentication method is requested. */
        SINGLELOGOUT,   /**< Indicates an embedded browser based single sign-on authentication logout is requested. */
        LEGACY_SINGLESIGNON,   /**< (deprecated) Indicates a browser based single sign-on authentication method is requested. */
    };

enum MessageType

MessageType presents a level of severity associated with messages that are sent to the API. The severity can be useful for deciding how a message is to be shown. A UI might decide based on type to show a message as a modal dialog versus a message written to the status area for an existing UI.

Enumerator:

  MsgType_Error | Issue usually requiring user to acknowledge
  MsgType_Alert | Warning message that must be shown to user.
  MsgType_Warn | Less severe, not required to be shown to user
  MsgType_Info | General message providing status, progress, etc.
  MsgType_Status | Can be used to indicate unexpected tunnel status change.
  MsgType_UrlError | Error message that provides additional information by opening browser.
  MsgType_Announcement | Informational message that must be shown to the user. Announcements are currently only supported on desktop platforms.
  MsgType_Ephemeral_Alert | Warning message that must be shown to the user, but is closed by the occurrence of an error, announcement, or alert message. Ephemeral Alerts are currently only supported on desktop platforms

    {
        MsgType_Error,      /**< Issue usually requiring user to acknowledge */
        MsgType_Alert,      /**< Warning message that must be shown to user. */
        MsgType_Warn,       /**< Less severe, not required to be shown to user */
        MsgType_Info,       /**< General message providing status, progress, etc. */
        MsgType_Status,     /**< Can be used to indicate unexpected tunnel status change. */
        MsgType_UrlError,   /**< Error message that provides additional information by opening browser. */
        MsgType_Announcement,/**< Informational message that must be shown to the user.
                                 Announcements are currently only supported on desktop platforms. */
        MsgType_Ephemeral_Alert,/**< Warning message that must be shown to the user, but is closed by
                                 the occurrence of an error, announcement, or alert message.
                                 Ephemeral Alerts are currently only supported on desktop platforms */
    };

enum OperatingMode

Indicates the client mode of operation. Unlike tunneling mode or other mutually exclusive modes, client operating modes are independent settings, several of which can be turned on simultaneously.

Enumerator:

  FIPS | Indicates that the client is running in FIPS mode.
  StartBeforeLogon | Indicates that the client is running in Start Before Login mode.
  GUI | Indicates that the client is a GUI client.
  TrustedNetworkDetection | Indicates that a Trusted Network Detection policy is enabled for the client.
  AlwaysOnVpn | Indicates that the Always On policy is enabled for the client.
  NetworkIssue | For user notifications only. Indication by API to the UI that there is a network condition.
  Quarantined | Indicates that the VPN session is being Quarantined by the secure gateway.
  AutomaticHeadendSelection | Indicates that Automatic Headend is enabled.
  DisconnectAllowed | Indicates that the user is allowed to disconnect the VPN based on policy.
  VPNDisabled | Indicates that the VPN service is to be marked as disabled.
  SCEPMode | Indicates that the client is performing a SCEP cert enrollment.
  OnTrustedNetwork | Indicates that at last check, the client detected that it was on a trusted network.
  ManualHostInputAllowed | Indicates that the user is allowed to add a new host by typing its name in the VPN edit box.
  ErrorSuppressed | Indicates a connection error has been returned fronm the agent, but was suppressed to warning to prevent popup dialog in the UI.
  StrictMode | Indicates that the client is running in strict certificate trust mode.
  CLI | Indicates that the client is a CLI client.
  Management | Indicates that the client is strictly used for initiating a management tunnel.

    {
        FIPS                     = (1 << 0), /**< Indicates that the client is
                                                  running in FIPS mode. */
        StartBeforeLogon         = (1 << 1), /**< Indicates that the client is
                                                  running in Start Before Login
                                                  mode. */
        GUI                      = (1 << 2), /**< Indicates that the client is
                                                  a GUI client. */
        TrustedNetworkDetection  = (1 << 3), /**< Indicates that a Trusted Network
                                                  Detection policy is enabled for
                                                  the client. */
        AlwaysOnVpn              = (1 << 4), /**< Indicates that the Always On
                                                  policy is enabled for the client. */
        NetworkIssue             = (1 << 5), /**< For user notifications only.
                                                  Indication by API to the UI that
                                                  there is a network condition. */
        Quarantined              = (1 << 6), /**< Indicates that the VPN session is being
                                                  Quarantined by the secure gateway. */
        AutomaticHeadendSelection= (1 << 7), /**< Indicates that Automatic Headend
                                                  is enabled. */
        DisconnectAllowed        = (1 << 8), /**< Indicates that the user is allowed
                                                  to disconnect the VPN based on
                                                  policy. */
        VPNDisabled              = (1 << 9), /**< Indicates that the VPN service is
                                                  to be marked as disabled. */
        SCEPMode                 = (1 << 10), /**< Indicates that the client is
                                                   performing a SCEP cert enrollment. */
        OnTrustedNetwork         = (1 << 11), /**< Indicates that at last check, the
                                                   client detected that it was on
                                                   a trusted network. */
        ManualHostInputAllowed   = (1 << 12), /**< Indicates that the user is allowed
                                                   to add a new host by typing its name
                                                   in the VPN edit box. */
        ErrorSuppressed          = (1 << 13), /**< Indicates a connection error has
                                                   been returned fronm the agent, but
                                                   was suppressed to warning to
                                                   prevent popup dialog in the UI. */
        StrictMode               = (1 << 14), /**< Indicates that the client is
                                                   running in strict certificate trust mode. */
        CLI                      = (1 << 15), /**< Indicates that the client is
                                                   a CLI client. */
        Management               = (1 << 16)  /**< Indicates that the client is strictly
                                                   used for initiating a management tunnel. */
    };

enum PreferenceId

Enumerator:

  ServiceDisable | This preference disable the VPN service. If more than one profile exists and any one profile has VPN enabled, then it will be enabled. False is the default.
  CertificateStoreOverride | This preference will trigger an alternate authentication sequence in the API. The preference is only settable by an administrator.
  CertificateStore | This preference indicates which Windows certificate store AnyConnect should look in for client certificates. The options are All, Machine and User with a default of All. The preference is only settable by an administrator.
  CertificateStoreMac | This preference indicates which macOS keychain AnyConnect should look in for client certificates. The options are All, System and Login with a default of All. The preference is only settable by an administrator.
  CertificateStoreLinux | This preference indicates which Linux certificate store AnyConnect should look in for client certificates. The options are All, Machine and User with a default of All. The preference is only settable by an administrator.
  ShowPreConnectMessage | The ShowPreConnectMessage preference gives the administrator the ability to display an AnyConnect startup banner message. The message will appear only once per AnyConnect program start. The preference is only settable by an administrator.
  AutoConnectOnStart | This preference allows the user to select whether to establish a connection automatically on startup or not.
  MinimizeOnConnect | This preference allows the user to select if the GUI should minimize when the connection is established
  LocalLanAccess | This preference will provide a mechanism where the user can disable access to their Local LAN.
  DisableCaptivePortalDetection | This preference will provide a mechanism where the user can disable captive portal detection.
  AutoReconnect | First control of the reconnect behavior. If the client becomes disconnected for any reason, a reconnect attempt is made.
  AutoReconnectBehavior | Second control of the reconnect behavior. When coming out of suspend/hibernate/standby mode. Options are disconnect on suspend and reconnect after suspend.
  SuspendOnConnectedStandby | This setting allows to control whether the VPN tunnel is suspended when the system enters the Connected Standby mode. It applies only to Windows 8 and above.
  UseStartBeforeLogon | This preference allows an administrator to control the use of the Start Before Logon feature. The preference can be set to true (on) or false (off).
  AutoUpdate | Once the Downloader has loaded the profile, it can check the AutoUpdate preference to see if updates are either disabled or enabled
  RSASecurIDIntegration | This preference will enable the administrator and possibly end user to select the preferred method of managing their SDI PIN and PASSCODE interactions. Options are Automatic (default), SoftwareTokens and HardwareTokens.
  WindowsLogonEnforcement | This preference allows an administrator to control if more than one user may be logged into the client PC during the VPN connection (Windows only).
  WindowsVPNEstablishment | This preference allows an administrator to control whether or not remote users may initiate a VPN connection (Windows only).
  LinuxLogonEnforcement | This preference allows an administrator to control if more than one user may be logged into the client PC during the VPN connection (Linux only).
  LinuxVPNEstablishment | This preference allows an administrator to control whether or not remote users may initiate a VPN connection (Linux only).
  ProxySettings | This preference allows an administrator to control how user's proxy setups are handled.
  AllowLocalProxyConnections | This preference allows the administrator to control whether to allow establishing a connection through a local proxy.
  PPPExclusion | This preference allows an administrator to control the policy used to exclude routes to PPP servers when connecting over L2TP or PPTP. Options are Automatic (default), Disable, and Override.
  PPPExclusionServerIP | When PPPExclusion is set to Manual, the value of this preference allows an end user to specify the address of a PPP server that should be excluded from tunnel traffic.
  AutomaticVPNPolicy | This preference allows an administrator to define a policy to automatically manage when a VPN connection should be started or stopped.
  TrustedNetworkPolicy | This preference allows an administrator to define a policy for users in trusted networks. The options are: Disconnect or DoNothing.
  UntrustedNetworkPolicy | This preference allows an administrator to define a policy for users in untrusted networks. The options are: Connect or DoNothing.
  BypassConnectUponSessionTimeout | This preference allows an administrator the ability to instruct the client to bypass the automatic connection retry after a VPN session timeout.
  TrustedDNSDomains | This preference defines a list of comma separated DNS suffixes that a network interface in a trusted network might have.
  TrustedDNSServers | This preference defines a list of comma separated DNS servers that a network interface in a trusted network might have.
  TrustedHttpsServerList | This preference defines a list of comma separated https servers reachable only via a trusted network.
  DisableUntrustedInterfaces | This preference disables interface without trusted server connectivity while in trusted network when there are multiple network interfaces.
  AlwaysOn | This preference governs VPN reestablishment after interruptions
  ConnectFailurePolicy | This preference gives the network administrator the ability to dictate the network access allowed by the client endpoint device following a VPN connection establishment failure. It is a component of AlwaysOn
  AllowCaptivePortalRemediation | This preference gives the network administrator the ability to dictate the network access allowed by the client endpoint device following a VPN connection establishment failure it is a component of AlwaysOn
  CaptivePortalRemediationTimeout | This preference allows the network administrator the ability to impose a time limit for captive portal remediation when the ConnectFailurePolicy value is Closed It is a component of AlwaysOn
  ApplyLastVPNLocalResourceRules | This preference gives the network administrator the ability to allow split routes and firewall rules to be applied following a VPN connection establishment failure when the ConnectFailurePolicy value is Closed It is a component of AlwaysOn
  AllowVPNDisconnect | During Always On, this specifies that the user is allowed to disconnect the VPN session.
  AllowedHosts | During Always On, user has access to the specified hosts when VPN is disconnected.
  EnableScripting | This preference allows an administrator to enable scripting (on connect or on disconnect).
  TerminateScriptOnNextEvent | This preference dictates whether or not AnyConnect will terminate a running script process if a transition to another scriptable event occurs.
  EnablePostSBLOnConnectScript | This preference is used to control whether or not the OnConnect script will be launched from the desktop GUI when a tunnel has been established via SBL.
  AutomaticCertSelection | This preference dictates whether or not to disable the default automatic certificate selection for user certificates. If disabled, a certificate selection dialog is displayed. This only applies if the GUI is enabled and not SBL. This only applies to Windows (not WinMobile).
  RetainVpnOnLogoff | First control of the logoff behavior. This preference allows an administrator to control if the VPN is terminated or retained after user logs off.
  UserEnforcement | Second control of the logoff behavior. When the VPN connection has been retained after user logged off. Controls what user can log in and keep the VPN connection. Options are same user only and any user.
  DeviceLockRequired | This preference indicates whether or not a Windows Mobile device must be configured with a password or PIN prior to establishing a VPN connection. This configuration is only valid on Windows Mobile devices that use the Microsoft Default Local Authentication Provider (LAP).
  DeviceLockMaximumTimeoutMinutes | When set to a non-negative number, this preference specifies the maximum number of minutes a device can be inactive before device lock takes into effect. (WM5/WM5AKU2+)
  DeviceLockMinimumPasswordLength | When set to a non-negative number, this preference specifies that any PIN/password used for device lock must be equal to or longer than the specified value, in characters. This setting must be pushed down to the mobile device by syncing with an Exchange server before it can be enforced. (WM5AKU2+)
  DeviceLockPasswordComplexity | This preference checks whether or not the password belongs to one of three subtypes: alpha, pin, strong
  EnableAutomaticServerSelection | Automatic server selection will automatically select the optimal secure gateway for the endpoint
  AutoServerSelectionImprovement | During a reconnection attempt after a system resume, this setting specifies the minimum estimated performance improvement required to justify transitioning a user to a new server This value represents percentage in 0..100
  AutoServerSelectionSuspendTime | During a reconnection attempt after a system resume, this specifies the minimum time a user must have been suspended in order to justify a new server selection calculation. Unit is hours
  AuthenticationTimeout | Time, in seconds, that the client waits for authentication to be completed.
  SafeWordSofTokenIntegration | This preference will enable the administrator and possibly the end user to enable SafeWord SofToken integration. Options are Enabled (true) and Disabled (false - default).
  AllowIPsecOverSSL | if 'true' then tunneling of IPSEC over SSL is made possible with help from the ASA.
  ClearSmartcardPin | This preference controls whether the smartcard pin will be cleared on a successful connection
  IPProtocolSupport | This preference controls which protocol(s) will be allowed for the connection
  CaptivePortalRemediationBrowserFailover | This preference is applicable to enhanced captive portal remediation and specifies whether the user is allowed to opt for an external browser for remediation, as opposed to the AnyConnect browser.
  AllowManualHostInput | This preference specifies whether the user is allowed to type a new hostname in the VPN edit box.
  BlockUntrustedServers | This preference specifies whether the user wants to allow for connections to secure gateways with certificate errors.
  PublicProxyServerAddress | This preference specifies the public proxy server address to be used. This number is in the format ServerAddr:ServerPort (ex. 101.89.85.444:8080) or just the FQDN.
  CertificatePinning | This preference specifies whether Certificate Pinning check should be performed during server certificate verification.

    {
        ServiceDisable,             /**< This preference disable the VPN service.
                                     If more than one profile exists and any one
                                     profile has VPN enabled, then it will be
                                     enabled.  False is the default. */
        CertificateStoreOverride,/**< This preference will trigger an alternate
                                     authentication sequence in the API. The
                                     preference is only settable by an
                                     administrator. */
        CertificateStore,       /**< This preference indicates which Windows certificate
                                     store AnyConnect should look in for client certificates.
                                     The options are All, Machine and User with a default of All.
                                     The preference is only settable by an administrator. */
        CertificateStoreMac,    /**< This preference indicates which macOS keychain
                                     AnyConnect should look in for client certificates.
                                     The options are All, System and Login with a default of All.
                                     The preference is only settable by an administrator. */
        CertificateStoreLinux,  /**< This preference indicates which Linux certificate
                                     store AnyConnect should look in for client certificates.
                                     The options are All, Machine and User with a default of All.
                                     The preference is only settable by an administrator. */
        ShowPreConnectMessage,  /**< The ShowPreConnectMessage preference gives the
                                     administrator the ability to display an AnyConnect
                                     startup banner message. The message will appear
                                     only once per AnyConnect program start. The
                                     preference is only settable by an
                                     administrator. */
        AutoConnectOnStart,     /**< This preference allows the user to select
                                     whether to establish a connection automatically
                                     on startup or not. */
        MinimizeOnConnect,      /**< This preference allows the user to select if
                                     the GUI should minimize when the connection is
                                     established */
        LocalLanAccess,         /**< This preference will provide a mechanism where
                                     the user can disable access to their Local LAN. */
        DisableCaptivePortalDetection, /**<This preference will provide a mechanism where
                                       the user can disable captive portal detection.*/
        AutoReconnect,          /**< First control of the reconnect behavior. If the
                                     client becomes disconnected for any reason, a
                                     reconnect attempt is made.   */
        AutoReconnectBehavior,  /**< Second control of the reconnect behavior. When
                                     coming out of suspend/hibernate/standby mode.
                                     Options are disconnect on suspend and reconnect
                                     after suspend. */
        SuspendOnConnectedStandby,  /**< This setting allows to control whether the VPN tunnel
                                         is suspended when the system enters the Connected Standby
                                         mode. It applies only to Windows 8 and above. */
        UseStartBeforeLogon,    /**< This preference allows an administrator to
                                     control the use of the Start Before Logon
                                     feature. The preference can be set to true (on)
                                     or false (off). */
        AutoUpdate,             /**< Once the Downloader has loaded the profile, it
                                     can check the AutoUpdate preference to see if
                                     updates are either disabled or enabled */
        RSASecurIDIntegration,  /**< This preference will enable the administrator
                                     and possibly end user to select the preferred
                                     method of managing their SDI PIN and PASSCODE
                                     interactions. Options are Automatic (default),
                                     SoftwareTokens and HardwareTokens. */
        WindowsLogonEnforcement,/**< This preference allows an administrator to
                                     control if more than one user may be logged into
                                     the client PC during the VPN connection (Windows
                                     only). */
        WindowsVPNEstablishment,/**< This preference allows an administrator to
                                     control whether or not remote users may initiate
                                     a VPN connection (Windows only). */
        LinuxLogonEnforcement,  /**< This preference allows an administrator to
                                     control if more than one user may be logged into
                                     the client PC during the VPN connection (Linux
                                     only). */
        LinuxVPNEstablishment,  /**< This preference allows an administrator to
                                     control whether or not remote users may initiate
                                     a VPN connection (Linux only). */
        ProxySettings,          /**< This preference allows an administrator to
                                     control how user's proxy setups are handled.*/
        AllowLocalProxyConnections, /**< This preference allows the administrator to control
                                     whether to allow establishing a connection through
                                     a local proxy. */
        PPPExclusion,           /**< This preference allows an administrator to control
                                     the policy used to exclude routes to
                                     PPP servers when connecting over L2TP or PPTP.
                                     Options are Automatic (default), Disable,
                                     and Override. */
        PPPExclusionServerIP,   /**< When PPPExclusion is set to Manual,
                                     the value of this preference allows an
                                     end user to specify the address of a
                                     PPP server that should be excluded
                                     from tunnel traffic. */
        AutomaticVPNPolicy,     /**< This preference allows an administrator to
                                     define a policy to automatically manage when a
                                     VPN connection should be started or stopped. */
        TrustedNetworkPolicy,   /**< This preference allows an administrator to
                                     define a policy for users in trusted networks.
                                     The options are: Disconnect or DoNothing. */
        UntrustedNetworkPolicy, /**< This preference allows an administrator to
                                     define a policy for users in untrusted networks.
                                     The options are: Connect or DoNothing. */
            BypassConnectUponSessionTimeout, /**< This preference allows an administrator
                                     the ability to instruct the client to bypass the
                                     automatic connection retry after a VPN session timeout. */
        TrustedDNSDomains,      /**< This preference defines a list of comma
                                     separated DNS suffixes that a network interface
                                     in a trusted network might have. */
        TrustedDNSServers,      /**< This preference defines a list of comma
                                     separated DNS servers that a network interface
                                     in a trusted network might have. */
        TrustedHttpsServerList,  /**< This preference defines a list of comma separated
                                      https servers reachable only via a trusted network.*/
        DisableUntrustedInterfaces, /**< This preference disables interface without trusted
                                         server connectivity while in trusted network
                                         when there are multiple network interfaces. */
        AlwaysOn,               /**< This preference governs VPN reestablishment after
                                     interruptions */
        ConnectFailurePolicy,   /**< This preference gives the network administrator
                                     the ability to dictate the network access allowed
                                     by the client endpoint device following a VPN
                                     connection establishment failure. It is a component
                                     of AlwaysOn */
        AllowCaptivePortalRemediation, /**< This preference gives the network administrator
                                        the ability to dictate the network access
                                        allowed by the client endpoint device following
                                        a VPN connection establishment failure it is a
                                        component of AlwaysOn */
        CaptivePortalRemediationTimeout, /**< This preference allows the network administrator
                                         the ability to impose a time limit for captive portal
                                         remediation when the ConnectFailurePolicy value is Closed
                                         It is a component of AlwaysOn */
        ApplyLastVPNLocalResourceRules, /**< This preference gives the network administrator
                                           the ability to allow split routes and firewall rules
                                           to be applied following a VPN connection establishment
                                           failure when the ConnectFailurePolicy value is Closed
                                           It is a component of AlwaysOn */
        AllowVPNDisconnect,     /**< During Always On, this specifies that the user is allowed to
                                     disconnect the VPN session. */
        AllowedHosts,           /**< During Always On, user has access to the specified hosts
                                     when VPN is disconnected. */
        EnableScripting,        /**< This preference allows an administrator to
                                     enable scripting (on connect or on
                                     disconnect). */
        TerminateScriptOnNextEvent,   /**< This preference dictates whether or not
                                           AnyConnect will terminate a running script
                                           process if a transition to another
                                           scriptable event occurs. */
        EnablePostSBLOnConnectScript, /**< This preference is used to control whether
                                           or not the OnConnect script will be launched
                                           from the desktop GUI when a tunnel has been
                                           established via SBL. */
        AutomaticCertSelection,   /**< This preference dictates whether or not to disable
                                       the default automatic certificate selection for user
                                       certificates. If disabled, a certificate selection dialog is
                                       displayed. This only applies if the GUI is enabled
                                       and not SBL. This only applies to Windows (not WinMobile). */
        RetainVpnOnLogoff,        /**< First control of the logoff behavior. This preference allows
                                       an administrator to control if the VPN is terminated or retained
                                       after user logs off.*/
        UserEnforcement,          /**< Second control of the logoff behavior. When the VPN connection has
                                       been retained after user logged off. Controls what user can log in
                                       and keep the VPN connection. Options are same user only and any user. */
        DeviceLockRequired,           /**< This preference indicates whether or not
                                           a Windows Mobile device must be configured
                                           with a password or PIN prior to establishing
                                           a VPN connection. This configuration is
                                           only valid on Windows Mobile devices that
                                           use the Microsoft Default Local
                                           Authentication Provider (LAP). */
        DeviceLockMaximumTimeoutMinutes,   /**< When set to a non-negative number,
                                                this preference specifies the maximum
                                                number of minutes a device can be
                                                inactive before device lock takes
                                                into effect. (WM5/WM5AKU2+) */
        DeviceLockMinimumPasswordLength,   /**< When set to a non-negative number,
                                                this preference specifies that any
                                                PIN/password used for device lock
                                                must be equal to or longer than
                                                the specified value, in characters.
                                                This setting must be pushed down to
                                                the mobile device by syncing with
                                                an Exchange server before it can be
                                                enforced. (WM5AKU2+) */
        DeviceLockPasswordComplexity,      /**< This preference checks whether or
                                                not the password belongs to one of
                                                three subtypes: alpha, pin, strong */
        EnableAutomaticServerSelection,    /**< Automatic server selection will
                                                automatically select the optimal
                                                secure gateway for the endpoint */
        AutoServerSelectionImprovement,    /**< During a reconnection attempt after
                                                a system resume, this setting
                                                specifies the minimum  estimated
                                                performance improvement required to
                                                justify transitioning a user to a new server
                                                This value represents percentage in 0..100 */
        AutoServerSelectionSuspendTime,    /**< During a reconnection attempt after
                                                a system resume, this specifies the
                                                minimum time a user must have been
                                                suspended in order to justify a new
                                                server selection calculation. Unit is hours */
        AuthenticationTimeout,             /**< Time, in seconds, that the client waits
                                                for authentication to be completed.*/
        SafeWordSofTokenIntegration,  /**< This preference will enable the administrator and possibly
                                           the end user to enable SafeWord SofToken integration.
                                           Options are Enabled (true) and Disabled (false - default). */
        AllowIPsecOverSSL,                      /**< if 'true' then tunneling of IPSEC over SSL
                                                is made possible with help from the ASA.
                                            */
        ClearSmartcardPin,                 /**< This preference controls whether the smartcard pin
                                                will be cleared on a successful connection*/
        IPProtocolSupport,                 /**< This preference controls which protocol(s) will be
                                                allowed for the connection*/
        CaptivePortalRemediationBrowserFailover, /**< This preference is applicable to enhanced captive portal
                                                      remediation and specifies whether the user is allowed to
                                                      opt for an external browser for remediation, as opposed to
                                                      the AnyConnect browser. */
        AllowManualHostInput,              /**< This preference specifies whether the user
                                                is allowed to type a new hostname in the VPN
                                                edit box. */
        BlockUntrustedServers,             /**< This preference specifies whether the user wants
                                                to allow for connections to secure gateways with
                                                certificate errors. */
        PublicProxyServerAddress,          /**< This preference specifies the public proxy server
                                                address to be used. This number is in the format
                                                ServerAddr:ServerPort (ex. 101.89.85.444:8080)
                                                or just the FQDN. */
        CertificatePinning,                /**< This preference specifies whether Certificate Pinning
                                                check should be performed during server certificate
                                                verification. */
        UnknownPreference
    };

enum PreferenceScope

Indicates the scope of the preferences contained in a PreferenceInfo object

Enumerator:

  User | Indicates that the preferences were set by a user
  Global | Indicates that the preferences are global
  UserAndGlobal | Indicates that we have both user and global preferences

    {
        User,               /**< Indicates that the preferences were set by a user */
        Global,             /**< Indicates that the preferences are global */
        UserAndGlobal       /**< Indicates that we have both user and global preferences */
    };

enum PromptType

Indicates the prompt or credential type.

Enumerator:

  Prompt_Input | label and value.
  Prompt_Password | label and value, indicates user response should be masked.
  Prompt_Banner | value (the banner) with no label set.
  Prompt_Combo | list with choices options.
  Prompt_Header | label intended as header and with value.
  Prompt_Hidden | hidden value, should be ignored and left unchanged in response.
  Prompt_CheckBox | label and value (contrained to true or false)
  Prompt_SSO | single sign-on authentication token prompt

                    { Prompt_Input,     /**< label and value. */
                      Prompt_Password,  /**< label and value, indicates user
                                             response should be masked. */
                      Prompt_Banner,    /**< value (the banner) with no label set. */
                      Prompt_Combo,     /**< list with choices options. */
                      Prompt_Header,    /**< label intended as header and with
                                             value. */
                      Prompt_Hidden,    /**< hidden value, should be ignored and
                                             left unchanged in response. */
                      Prompt_CheckBox,  /**< label and value (contrained to true or false) */
                      Prompt_SSO        /**< single sign-on authentication token prompt */
    };

enum SDITokenType

Identifies the type of token that was used successfully when SDI Authentication is in use.

    {
        SDITT_NONE,
        SDITT_HARDWARE,
        SDITT_SOFTWARE
    };

enum VPNError

Indicates the last error seen by the API in this connection attempt.

Enumerator:

  VPNSuccess | No error has occurred.
  VPNError_Generic_FatalError | An error of unknown type has occured
  VPNError_Connection_Error | An unknown connection error has occured, such as bad hostname, bad group, etc.
  VPNError_Connection_InvalidGroupURL | Invalid Group URL specified in the server address
  VPNError_Network_Error | An unknown network error has occured, such as DNS resolution error, unable to open socket, routing error, captive portal, etc.
  VPNError_Authentication_Error | An unknown user authenication error has occured.
  VPNError_Authentication_DAP_Terminate | Access Denied: Your system does not meet policy requirements (DAP).
  VPNError_ClientCertificate_UnknownError | An unknown client certificate error has occured.
  VPNError_ClientCertificate_Missing | A client certificate is required but no client certificate has been found on the system.
  VPNError_ClientCertificate_Expired | The client certificate has expired
  VPNError_ClientCertificate_NotYetValid | The client certificate is not yet valid.
  VPNError_ServerCertificate_UnknownError | An unknown error has occured when validating the server certificate.
  VPNError_ServerCertificate_Expired | The server certificate has expired.
  VPNError_ServerCertificate_NotYetValid | The server certificate is not yet valid.

    {
        VPNSuccess = 0,                      /**< No error has occurred. */
        VPNError_Generic_FatalError = 1,     /**< An error of unknown type has
                                                  occured */

        VPNError_Connection_Error = 100,     /**< An unknown connection error has
                                                  occured, such as bad hostname, bad
                                                  group, etc. */
        VPNError_Connection_InvalidGroupURL, /**< Invalid Group URL specified in the
                                                  server address */

        VPNError_Network_Error = 200,        /**< An unknown network error has
                                                  occured, such as DNS resolution
                                                  error, unable to open socket,
                                                  routing error, captive portal,
                                                  etc. */

        VPNError_Authentication_Error = 300, /**< An unknown user authenication
                                                  error has occured. */

        VPNError_Authentication_DAP_Terminate, /**< Access Denied: Your system does
                                                    not meet policy requirements (DAP). */

        VPNError_ClientCertificate_UnknownError = 400, /**< An unknown client
                                                            certificate error has
                                                            occured. */
        VPNError_ClientCertificate_Missing,  /**< A client certificate is required
                                                  but no client certificate has been
                                                  found on the system. */
        VPNError_ClientCertificate_Expired,  /**< The client certificate has expired */
        VPNError_ClientCertificate_NotYetValid, /**< The client certificate is not
                                                     yet valid. */

        VPNError_ServerCertificate_UnknownError = 500, /**< An unknown error has
                                                            occured when validating
                                                            the server certificate. */
        VPNError_ServerCertificate_Expired,    /**< The server certificate has
                                                    expired. */
        VPNError_ServerCertificate_NotYetValid /**< The server certificate is not
                                                    yet valid. */
    };

enum VPNState

Provides the current state of the VPN tunnel.

Enumerator:

  CONNECTED | VPN is active
  DISCONNECTED | VPN is inactive
  CONNECTING | VPN is being established
  DISCONNECTING | VPN is being terminated
  RECONNECTING | VPN is being re-connected. This state can occur due to network or other temporary problems. The state indicates that the VPN is temporarily unavailable and indicates the connection is being re-established.
  PAUSING | VPN is being paused.
  PAUSED | VPN is paused.
  SSOPOLLING | API is doing auth-poll, VPN is disconnected.

    {
        CONNECTED     = STATE_CONNECTED,        /**< VPN is active */
        DISCONNECTED  = STATE_DISCONNECTED,     /**< VPN is inactive */
        CONNECTING    = STATE_CONNECTING,       /**< VPN is being established */
        DISCONNECTING = STATE_DISCONNECTING,    /**< VPN is being terminated */
        RECONNECTING  = STATE_RECONNECTING,     /**< VPN is being re-connected.  This state
                                                     can occur due to network or other
                                                     temporary problems.  The state
                                                     indicates that the VPN is temporarily
                                                     unavailable and indicates the
                                                     connection is being re-established. */
        PAUSING       = STATE_PAUSING,          /**< VPN is being paused. */
        PAUSED        = STATE_PAUSED,           /**< VPN is paused. */
        SSOPOLLING    = STATE_SSOPOLLING,       /**< API is doing auth-poll, VPN is disconnected. */
        UNKNOWN       = ~0
    };

enum VPNSubState

Provides the current sub-state of the VPN tunnel.

    {
        VPNSS_NORMAL                            = VCSS_NORMAL,
        VPNSS_INDEFINITE_DELAY                  = VCSS_INDEFINITE_DELAY,
        VPNSS_SESSION_EXPIRING                  = VCSS_SESSION_EXPIRING,
        VPNSS_MT_DISCONNECTED_DISABLED          = VCSS_MT_DISCONNECTED_DISABLED,
        VPNSS_MT_DISCONNECTED_TRUSTED_NW        = VCSS_MT_DISCONNECTED_TRUSTED_NW,
        VPNSS_MT_DISCONNECTED_USER_TUNNEL_ACTIVE= VCSS_MT_DISCONNECTED_USER_TUNNEL_ACTIVE,
        VPNSS_MT_DISCONNECTED_LAUNCH_FAILED     = VCSS_MT_DISCONNECTED_LAUNCH_FAILED,
        VPNSS_MT_DISCONNECTED_CONNECT_FAILED    = VCSS_MT_DISCONNECTED_CONNECT_FAILED,
        VPNSS_MT_DISCONNECTED_BAD_VPN_CONFIG    = VCSS_MT_DISCONNECTED_BAD_VPN_CONFIG,
        VPNSS_MT_DISCONNECTED_SW_UP_PENDING     = VCSS_MT_DISCONNECTED_SW_UP_PENDING,
        VPNSS_MTU_ADJUSTMENT_PENDING            = VCSS_MTU_ADJUSTMENT_PENDING
    };

enum WMHint

WMHint provides a hint for the GUI to either minimize or un-minimize.

Enumerator:

  MINIMIZE | hint to minimize GUI
  OPEN | hint to un-minimize GUI
  QUIT | hint that GUI should close. See also: WMHintReason
  REFRESHHOSTNAMES | hint to refresh the list of secure gateways
  REFRESHPREFS | hint to refresh the preferences
  SHOWCONNECTING | hint to display "connecting" status
  CLOSECREDENTIALPOPUP | hint to close the credentials popup

    {
        MINIMIZE,       /**< hint to minimize GUI */
        OPEN,           /**< hint to un-minimize GUI */
        QUIT,           /**< hint that GUI should close.  @see WMHintReason */
        REFRESHHOSTNAMES,/**< hint to refresh the list of secure gateways */
        REFRESHPREFS,   /**< hint to refresh the preferences */
        SHOWCONNECTING,  /**< hint to display "connecting" status */
        CLOSECREDENTIALPOPUP, /**< hint to close the credentials popup */
    };

enum WMHintReason

WMHintReason provides a reason indicator for the WMHint

Enumerator:

  SECONDGUISTART | Indicates a second GUI has been launched. This indicator is used to suggest that the GUI already running be OPENed and that the first one should exit.
  PROXYREQUEST | Proxy credential request can be for web-launch or standalone-initiated connections.
  SERVICEFAILURE | This tag is used when the VPN service is no longer available.
  DISCONNECT | Any disconnect notices should be seen by the user.
  SERVICESTOPPED | This tag will be used in cases where the VPN service has been stopped.
  CONNECT | Tag indicating an action to be taken due to connect, for example a request to minimize the UI.
  REASONUNKNOWN |

    {
        SECONDGUISTART, /**< Indicates a second GUI has been launched.  This
                             indicator is used to suggest that the GUI
                             already running be OPENed and that the first one
                             should exit. */
        PROXYREQUEST,   /**< Proxy credential request can be for web-launch or
                             standalone-initiated connections. */
        SERVICEFAILURE, /**< This tag is used when the VPN service
                             is no longer available. */
        DISCONNECT,     /**< Any disconnect notices should be seen by the user. */
        SERVICESTOPPED, /**< This tag will be used in cases where the VPN service
                             has been stopped. */
        CONNECT,        /**< Tag indicating an action to be taken due to connect,
                             for example a request to minimize the UI. */
        REASONUNKNOWN   /**< */
    };